LAPP 10401300 Female Insert 24 Position Crimp Connector - Equivalent & Substitute Parts

Part Overview

The LAPP 10401300 is an EPIC® HB series female insert connector designed for heavy-duty applications requiring 24-position crimp termination. This component functions as a receptacle insert for modular connector assemblies, accommodating 16A current at 500V with operating temperatures spanning -40°C to 125°C. The part is currently active in production with 923 units in stock. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across different connector series while accommodating application-specific requirements such as termination method preferences or enhanced voltage ratings.

Substiute Parts

10401300

LAPPIn Stock: 97810401300 Datasheet

Current PartRFQ

09330242716

HARTINGIn Stock: 83609330242716 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10401300 is determined by strict alignment of core electrical and mechanical parameters. The substitute part HARTING 09330242716 qualifies based on the following criteria:

Matching Parameters:

• Connector Type: Insert (same form factor)
• Gender: Female (identical mating interface)
• Number of Positions: 24 (functional equivalence; includes additional ground position)
• Current Rating: 16A (identical power handling)
• Operating Temperature Range: -40°C to 125°C (identical thermal envelope)
• Housing Material: Polycarbonate (PC) (same mechanical properties)
• Contact Material: Copper Alloy (same electrical properties)
• Contact Finish: Silver (same contact performance)

Differing Parameters:

• Termination Style: Push In (versus Crimp on main part)
• Voltage Rating: 600V (exceeds 500V requirement)
• Position Configuration: 24+Ground (adds dedicated ground contact)

The substitute part exceeds the voltage specification and provides enhanced grounding architecture. The termination method difference (Push In versus Crimp) represents a functional trade-off requiring application-level assessment of assembly process compatibility.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (LAPP 10401300): Select the LAPP 10401300 when crimp termination is the specified assembly method and existing tooling, process documentation, and quality control procedures are established for this termination style. The part maintains active production status with adequate inventory availability (923 units).

Substitute Part Selection (HARTING 09330242716): The HARTING 09330242716 qualifies as a functional substitute when the following conditions are met:

1. Assembly process compatibility with Push In termination method is confirmed
2. The enhanced 600V voltage rating aligns with or exceeds system requirements
3. The dedicated ground position (24+Ground configuration) provides system-level benefits
4. Regulatory compliance requirements are satisfied by ROHS3 and REACH Unaffected certifications
5. Connector series interchangeability (Han® ES with EPIC® HB mating interfaces) is validated for the specific application

Both parts maintain identical current ratings (16A), operating temperature ranges (-40°C to 125°C), and core contact materials (Copper Alloy with Silver finish). The substitute part provides documented compliance certifications (ROHS3, REACH Unaffected, UL94 V-0 flammability rating) not specified for the primary part.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09330242716 directly replace the LAPP 10401300 in existing assemblies?

A: Direct mechanical replacement depends on connector housing compatibility between EPIC® HB and Han® ES series. The electrical parameters (16A, 500V minimum, -40°C to 125°C) are compatible. However, the termination method differs (Push In versus Crimp), requiring verification that assembly equipment and processes support Push In termination.

Q: What is the significance of the 24+Ground position configuration on the HARTING part?

A: The HARTING 09330242716 includes a dedicated ground contact in addition to 24 signal/power positions. This provides a dedicated return path and is functionally compatible with 24-position applications. Systems designed for 24 discrete positions can utilize this part; the additional ground contact provides enhanced grounding architecture.

Q: Does the 600V rating on the HARTING part create compatibility issues with 500V systems?

A: No. A 600V-rated component exceeds the 500V requirement and operates safely in 500V applications. The higher voltage rating provides additional safety margin and is not a compatibility concern.

Q: Are there differences in contact resistance or signal integrity between these parts?

A: Both parts use Copper Alloy contacts with Silver finish, providing equivalent electrical performance characteristics. Contact resistance is determined by material composition and finish, which are identical.

Q: What compliance documentation is available for each part?

A: The HARTING 09330242716 provides documented ROHS3 compliance, REACH Unaffected status, and UL94 V-0 flammability rating. Compliance documentation for the LAPP 10401300 is not specified in the provided parameters and should be obtained from the manufacturer.

Q: How do inventory levels affect part selection?

A: The LAPP 10401300 has 923 units in stock, while the HARTING 09330242716 has 754 units available. Both parts maintain adequate inventory for production requirements. Selection should prioritize application compatibility over inventory levels.

Q: Can these parts be used interchangeably in the same connector housing?

A: Mechanical interchangeability depends on the specific connector housing design. EPIC® HB and Han® ES series use different housing architectures. Verification of insert-to-housing compatibility is required before substitution.