TE Connectivity 103960-1 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 103960-1 is a 2-position rectangular receptacle connector designed for IDC (Insulation Displacement Contact) termination with 26-30 AWG wire. This connector operates as a female socket in the AMPMODU MTE series and features gold-plated contacts with a 0.100" (2.54mm) pitch. The part is classified as Active product status with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or specific compliance requirements.

Key Parameters

Parameter	Specification
Connector Type	Rectangular Receptacle
Number of Positions	2
Contact Type	Female Socket
Pitch	0.100" (2.54mm)
Cable Termination Method	IDC (Insulation Displacement Contact)
Wire Gauge Range	26-30 AWG
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Fastening Type	Latch Lock
Mounting Type	Free Hanging (In-Line)
Number of Rows	1
Features	Closed End
Color	Black
Series	AMPMODU MTE
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution between TE Connectivity 103960-1 and 5-103960-1 is valid based on identical electrical and mechanical parameters. Both parts share the following critical substitution criteria:

Connector Configuration: 2-position rectangular receptacle with female socket contacts
Contact Interface: IDC termination for 26-30 AWG discrete or ribbon cable
Pitch and Spacing: 0.100" (2.54mm) pitch with single-row configuration
Contact Material: Gold plating at 15.0µin (0.38µm) thickness
Mechanical Interface: Latch lock fastening with free-hanging in-line mounting
Physical Features: Closed-end design with black housing
Environmental Rating: MSL 1 (unlimited moisture sensitivity)

Both parts operate within the AMPMODU MTE series and maintain functional equivalence for applications requiring 2-position IDC receptacle connectors with the specified wire gauge and contact finish.

Parameter Comparison

Parameter	103960-1	5-103960-1	Match Status
Manufacturer	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors	Identical
Category	Rectangular Connectors	Rectangular Connectors	Identical
Series	AMPMODU MTE	AMPMODU MTE	Identical
Connector Type	Receptacle	Receptacle	Identical
Contact Type	Female Socket	Female Socket	Identical
Number of Positions	2	2	Identical
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Identical
Number of Rows	1	1	Identical
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Identical
Fastening Type	Latch Lock	Latch Lock	Identical
Cable Termination	IDC	IDC	Identical
Wire Type	Discrete or Ribbon Cable	Discrete or Ribbon Cable	Identical
Wire Gauge	26-30 AWG	26-30 AWG	Identical
Features	Closed End	Closed End	Identical
Contact Finish	Gold	Gold	Identical
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	Identical
Color	Black	Black	Identical
Product Status	Active	Active	Identical
MSL Rating	1 (Unlimited)	1 (Unlimited)	Identical
ECCN	EAR99	EAR99	Identical
RoHS Status	Not applicable	RoHS Compliant	Differs
REACH Status	REACH Affected	Vendor Undefined	Differs

Engineering Selection Recommendations

Both 103960-1 and 5-103960-1 are functionally equivalent for applications requiring 2-position IDC rectangular receptacle connectors with 26-30 AWG wire termination. Selection between these parts is determined by compliance and regulatory requirements:

103960-1 carries REACH Affected status with Not Applicable RoHS classification. This part is suitable for applications where REACH compliance documentation is required and RoHS exemptions are applicable.

5-103960-1 is RoHS Compliant with Vendor Undefined REACH status. This part is suitable for applications requiring RoHS compliance certification. The higher inventory level (6019 pcs vs. 853 pcs) provides improved availability for high-volume requirements.

Both parts maintain identical electrical performance, mechanical interface, and environmental ratings. Selection should be based on specific regulatory requirements of the end application and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Are 103960-1 and 5-103960-1 electrically interchangeable?

A: Yes. Both parts feature identical contact configuration, pitch, wire gauge compatibility, and contact finish specifications. They operate as direct functional equivalents in IDC termination applications.

Q: What is the difference between these two part numbers?

A: The primary differences are RoHS compliance status and REACH documentation. The 103960-1 is not RoHS applicable, while 5-103960-1 is RoHS Compliant. REACH status also differs between the two variants. All electrical and mechanical parameters are identical.

Q: Can I use 5-103960-1 as a direct replacement for 103960-1?

A: Direct replacement is valid when the application permits RoHS Compliant components. Verify that your end-use requirements do not mandate the specific RoHS exemption status of the original part.

Q: Are there any packaging differences between these parts?

A: Both parts are supplied in Tube packaging. No packaging format differences exist between the two variants.

Q: What wire gauges are compatible with these connectors?

A: Both connectors accept 26-30 AWG wire for IDC termination. This range applies to discrete or ribbon cable configurations.

Q: Is the contact finish specification identical?

A: Yes. Both parts feature gold contact finish at 15.0µin (0.38µm) thickness, ensuring equivalent electrical performance and corrosion resistance.

Q: What is the pitch specification for these connectors?

A: Both connectors operate at 0.100" (2.54mm) pitch with single-row, 2-position configuration. This pitch is standard for AMPMODU MTE series rectangular connectors.

Q: Are moisture sensitivity ratings the same?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message