TE Connectivity 103672-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 103672-6 is a rectangular connector header, right-angle configuration, with 7 positions at 0.100" (2.54mm) pitch. This through-hole, shrouded male pin connector is designed for board-to-board or cable applications in automotive, general purpose, medical, and telecommunications environments. The part is currently active in production with 1163 pieces in stock. Substitute parts are identified to address inventory availability, compliance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

103672-6

TE Connectivity AMP ConnectorsIn Stock: 1247103672-6 Datasheet

Current PartRFQ

5-103672-6

TE Connectivity AMP ConnectorsIn Stock: 10755-103672-6 Datasheet

DirectRFQ

0705530006

MolexIn Stock: 777090705530006 Datasheet

SimilarRFQ

0705530041

MolexIn Stock: 23780705530041 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 103672-6 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Number of Positions: 7
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Connector Type: Header
• Contact Type: Male Pin
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Fastening Type: Latch Holder
• Contact Shape: Square
• Material Flammability Rating: UL94 V-0
• Insulation Color: Black
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Contact Finish - Mating: Tin-Lead, Tin, or Gold
• Contact Material: Brass or Phosphor Bronze
• Insulation Material: Thermoplastic or Polyester, Glass Filled
• Operating Temperature Range: -40°C ~ 105°C or -65°C ~ 105°C
• Current Rating: 3A or unspecified
• Voltage Rating: Unspecified or 250V
• Contact Length - Mating: 0.230" (5.84mm) to 0.240" (6.10mm)
• Insulation Height: 0.200" (5.08mm) to 0.215" (5.45mm)
• RoHS Status: RoHS non-compliant or ROHS3 Compliant
• REACH Status: REACH Affected, Vendor Undefined, or REACH Unaffected

Three substitute parts meet these criteria: TE Connectivity 5-103672-6 (direct manufacturer variant), Molex 0705530006, and Molex 0705530041.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 5-103672-6 is a direct manufacturer variant of the 103672-6. This part maintains identical mechanical and electrical specifications with the primary distinction being ROHS3 compliance status. Selection of 5-103672-6 is appropriate for applications requiring RoHS3 compliance or when the original 103672-6 is unavailable. The contact finish differs from Tin-Lead to Tin, which remains within acceptable substitution parameters.

Molex 0705530006 is a cross-manufacturer substitute from the SL 70553 series. This part maintains all critical mechanical parameters including 7-position, 2.54mm pitch, right-angle through-hole configuration, and 4-wall shrouding. Differences include phosphor bronze contact material versus brass, gold mating finish versus tin-lead, and polyester glass-filled insulation versus thermoplastic. The operating temperature range is reduced to -40°C ~ 105°C. This part is ROHS3 compliant and REACH unaffected. High inventory availability (77649 pieces) supports supply chain continuity.

Molex 0705530041 is a cross-manufacturer substitute from the SL 70553 series. This part maintains all critical mechanical parameters identical to 0705530006 with the distinction of tin mating finish instead of gold. Operating temperature range, contact material, and insulation material specifications are identical to 0705530006. This part is ROHS3 compliant and REACH unaffected.

Selection between Molex alternatives depends on contact finish requirements. Both Molex parts support applications with minimum operating temperature of -40°C; applications requiring -65°C operation must use TE Connectivity variants (103672-6 or 5-103672-6).

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 5-103672-6 be used as a direct replacement for 103672-6?

A: Yes. The 5-103672-6 is a direct manufacturer variant with identical mechanical and electrical specifications. The primary difference is RoHS3 compliance status. Both parts share the same AMPMODU MTE series designation, 7-position configuration, 2.54mm pitch, and through-hole right-angle mounting. Contact finish differs from Tin-Lead to Tin, which is within acceptable substitution parameters for this connector category.

Q: What are the key differences between TE Connectivity and Molex substitutes?

A: TE Connectivity parts (103672-6 and 5-103672-6) use brass contacts with thermoplastic insulation and operate from -65°C to 105°C. Molex parts (0705530006 and 0705530041) use phosphor bronze contacts with polyester glass-filled insulation and operate from -40°C to 105°C. Both maintain identical 7-position, 2.54mm pitch, right-angle through-hole configuration. Molex parts have slightly longer mating contact length (0.240" versus 0.230") and higher insulation height (0.215" versus 0.200").

Q: Which substitute should be selected for RoHS3 compliance?

A: TE Connectivity 5-103672-6, Molex 0705530006, and Molex 0705530041 are all ROHS3 compliant. The original 103672-6 is RoHS non-compliant. Selection among compliant alternatives depends on operating temperature requirements and contact finish specifications for the application.

Q: Are there operating temperature limitations when substituting with Molex parts?

A: Yes. Molex 0705530006 and 0705530041 operate from -40°C to 105°C, while TE Connectivity 103672-6 and 5-103672-6 operate from -65°C to 105°C. Applications requiring operation below -40°C must use TE Connectivity variants. Applications within the -40°C to 105°C range can use either manufacturer's parts.

Q: What is the difference between Molex 0705530006 and 0705530041?

A: Both parts are mechanically and electrically identical with the exception of mating contact finish. The 0705530006 features gold mating finish with 15.0µin (0.38µm) thickness, while 0705530041 features tin mating finish with 150.0µin (3.81µm) thickness. Both maintain phosphor bronze contact material, polyester glass-filled insulation, and -40°C to 105°C operating range.

Q: Can these connectors be used interchangeably in automotive applications?

A: All four parts (103672-6, 5-103672-6, 0705530006, and 0705530041) list automotive applications. Interchangeability depends on specific application requirements including operating temperature range, compliance certifications, and contact finish specifications. Verify application-specific requirements before substitution.

Q: What is the significance of the contact finish differences?

A: Contact finish affects corrosion resistance, contact resistance, and long-term reliability. Tin-Lead and Tin finishes provide standard performance. Gold finish (0705530006) offers enhanced corrosion resistance and lower contact resistance, suitable for low-signal applications. Tin finish with higher thickness (0705530041) provides improved durability. Selection depends on environmental exposure and signal integrity requirements.

Q: Are there packaging differences between these parts?

A: All four parts are supplied in tube packaging. Inventory quantities vary: 103672-6 (1163 pcs), 5-103672-6 (973 pcs), 0705530006 (77649 pcs), and 0705530041 (2330 pcs). Molex 0705530006 offers significantly higher inventory availability for supply chain planning.