TE Connectivity AMP Connectors 103361-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 103361-8 is a rectangular connector header designed for through-hole, right-angle mounting applications. This connector features 10 positions with 0.100" (2.54mm) pitch spacing and is part of the AMPMODU Mod II series. The connector is classified as obsolete, which necessitates identification of active equivalent parts for ongoing procurement and design requirements. The 103361-8 provides board-to-board or cable connectivity with shrouded 4-wall construction and solder termination.

Substiute Parts

103361-8

TE Connectivity AMP ConnectorsIn Stock: 892103361-8 Datasheet

Current PartRFQ

5-103361-8

TE Connectivity AMP ConnectorsIn Stock: 8975-103361-8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 103361-8 is determined by strict equivalence across the following critical parameters:

Mechanical Compatibility:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (10)
• Pitch spacing (0.100" / 2.54mm)
• Mounting configuration (Through Hole, Right Angle)
• Shrouding design (Shrouded - 4 Wall)
• Contact dimensions (Mating length 0.240", Post length 0.110", Insulation height 0.214")

Electrical Compatibility:

• Current rating (3A)
• Operating temperature range (-65°C ~ 105°C)
• Contact material (Phosphor Bronze)
• Mating contact finish (Gold)
• Material flammability (UL94 V-0)

Regulatory & Compliance:

• Series designation (AMPMODU Mod II)
• Base product number (103361)

The substitute part 5-103361-8 maintains full equivalence across all mechanical and electrical parameters. The primary distinction is product status (Active vs. Obsolete) and regulatory compliance (RoHS3 Compliant vs. RoHS non-compliant).

Parameter Comparison

Engineering Selection Recommendations

The 5-103361-8 is the direct active equivalent to the obsolete 103361-8. Both parts maintain identical mechanical and electrical specifications across all critical parameters including connector geometry, contact configuration, current rating, and operating temperature range.

Product Status Consideration: The 103361-8 is classified as obsolete, while the 5-103361-8 is active. For new designs and ongoing procurement, the 5-103361-8 is the appropriate selection to ensure long-term component availability and supply chain continuity.

Regulatory Compliance: The 5-103361-8 is RoHS3 compliant, whereas the 103361-8 is RoHS non-compliant. For applications subject to RoHS regulations or customer requirements mandating RoHS compliance, the 5-103361-8 is the required selection.

Contact Finish Specification: The primary technical distinction is the post contact finish: the 103361-8 specifies Tin-Lead, while the 5-103361-8 specifies Tin. Both finishes maintain the same thickness specification (100.0µin / 2.54µm) and are compatible with standard solder termination processes. The Tin finish in the 5-103361-8 aligns with lead-free manufacturing standards.

Packaging: The 5-103361-8 is supplied in Tube packaging, whereas the 103361-8 packaging is not specified. This distinction affects handling and storage but does not impact functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 5-103361-8 be used as a direct replacement for the 103361-8 in existing designs?

A: Yes. The 5-103361-8 is mechanically and electrically equivalent to the 103361-8. All critical parameters including connector type, position count, pitch spacing, mounting configuration, contact dimensions, current rating, and operating temperature are identical. The parts are interchangeable from a functional standpoint.

Q: What is the difference between the Tin-Lead finish on the 103361-8 and the Tin finish on the 5-103361-8?

A: Both finishes are applied to the post (solder tail) at the same thickness specification (100.0µin / 2.54µm). The Tin finish on the 5-103361-8 represents a lead-free alternative that complies with modern manufacturing standards. Both finishes are compatible with standard solder termination processes and provide equivalent electrical performance.

Q: Why is the 103361-8 listed as obsolete?

A: The 103361-8 is classified as obsolete by the manufacturer. The 5-103361-8 is the active equivalent part that replaces it in the product line. For new procurement and design work, the 5-103361-8 should be specified.

Q: Does the RoHS compliance difference affect compatibility?

A: The RoHS3 compliance of the 5-103361-8 versus the non-compliance of the 103361-8 does not affect electrical or mechanical compatibility. However, for applications subject to RoHS regulations or customer requirements, the 5-103361-8 is the required selection.

Q: Are there any differences in the shrouding or mechanical housing between these parts?

A: No. Both parts feature identical shrouded 4-wall construction with the same insulation height (0.214" / 5.44mm) and contact dimensions. The mechanical interface is fully equivalent.

Q: What is the significance of the Tube packaging for the 5-103361-8?

A: Tube packaging is a standard distribution format for connector headers. It affects handling, storage, and automated assembly processes but does not impact the connector's functional performance or compatibility with mating components.

Q: Can these connectors be used in high-temperature applications?

A: Yes. Both the 103361-8 and 5-103361-8 are rated for operating temperatures from -65°C to 105°C, making them suitable for a wide range of industrial and commercial applications within this temperature range.

Q: Are both parts suitable for board-to-board and cable applications?

A: Yes. Both connectors are specified for board-to-board or cable style applications. The right-angle through-hole mounting configuration supports both connection types.