TE Connectivity AMP Connectors 103164-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 103164-5 is a rectangular connector header designed for through-hole, right-angle mounting applications. This connector features 14 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, suitable for board-to-board or cable interconnection. The part is classified as obsolete, necessitating identification of active equivalent components for ongoing procurement and new design implementations. Substitute parts maintain identical electrical and mechanical specifications while offering improved product status and compliance certifications.

Substiute Parts

103164-5

TE Connectivity AMP ConnectorsIn Stock: 1003103164-5 Datasheet

Current PartRFQ

5-103164-5

TE Connectivity AMP ConnectorsIn Stock: 9005-103164-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete TE Connectivity 103164-5 is determined by strict equivalence across all electrical and mechanical parameters. The substitute part 5-103164-5 maintains identical specifications for connector type, contact configuration, pitch spacing, mounting orientation, shrouding design, termination method, contact dimensions, insulation properties, operating temperature range, current rating, and flammability certification. The primary distinction between the main part and its substitute is product status and packaging format. The main part 103164-5 is classified as obsolete with bulk packaging, while the substitute 5-103164-5 is active with tray packaging. Additionally, the substitute part achieves RoHS compliance and specifies tin post finish, whereas the main part is RoHS non-compliant with tin-lead post finish. These differences do not affect functional compatibility or electrical performance in applications requiring the AMPMODU Mod II 14-position, 2.54mm pitch header connector.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5-103164-5 is the direct equivalent for the obsolete TE Connectivity 103164-5. Selection of the substitute part is supported by three primary factors:

Product Status: The main part 103164-5 is classified as obsolete, limiting long-term availability and procurement viability. The substitute part 5-103164-5 maintains active product status, ensuring continued supply and manufacturing support.

Regulatory Compliance: The substitute part 5-103164-5 achieves RoHS compliance, meeting current environmental and regulatory requirements for electronic component procurement. The main part is RoHS non-compliant, which may restrict use in applications subject to RoHS directives.

Functional Equivalence: All electrical and mechanical parameters are identical between the main part and substitute, including connector type, contact configuration, pitch spacing, mounting orientation, shrouding design, termination method, contact dimensions, insulation properties, operating temperature range, and current rating. The substitute part is functionally interchangeable in all applications requiring the AMPMODU Mod II 14-position, 2.54mm pitch header connector.

The post finish difference (tin-lead versus tin) does not affect functional compatibility or electrical performance. Packaging format differs between bulk and tray, which affects handling and storage but not component functionality.

Frequently Asked Questions (FAQ)

Q: Can the substitute part 5-103164-5 be used as a direct replacement for the obsolete 103164-5?

A: Yes. The substitute part 5-103164-5 is functionally equivalent to the obsolete 103164-5 across all electrical and mechanical parameters. Both parts are AMPMODU Mod II series 14-position headers with 2.54mm pitch, right-angle through-hole mounting, and identical contact specifications. The substitute part is the direct equivalent for new designs and replacement applications.

Q: What is the difference between the post finish specifications (tin-lead versus tin)?

A: The main part 103164-5 specifies tin-lead post finish, while the substitute part 5-103164-5 specifies tin post finish. Both finishes provide equivalent solder joint reliability and electrical performance. The tin post finish in the substitute part reflects current manufacturing standards and supports RoHS compliance.

Q: Why is the substitute part RoHS compliant while the main part is not?

A: The substitute part 5-103164-5 was manufactured to meet RoHS directives, which restrict the use of hazardous substances including lead. The main part 103164-5 predates or was not manufactured to RoHS standards. For applications subject to RoHS requirements, the substitute part is the appropriate selection.

Q: Are there packaging differences between the main part and substitute?

A: Yes. The main part 103164-5 is supplied in bulk packaging, while the substitute part 5-103164-5 is supplied in tray packaging. Tray packaging provides improved handling, storage, and automated assembly compatibility. Packaging format does not affect component functionality or electrical performance.

Q: What is the operating temperature range for both parts?

A: Both the main part 103164-5 and substitute part 5-103164-5 operate across the temperature range of -65°C to 105°C. This specification is identical for both parts.

Q: Are the connector dimensions and contact specifications identical?

A: Yes. Both parts share identical connector dimensions, contact lengths, insulation height, contact shape, contact finish specifications, contact material, and insulation material. The 14-position, 2-row configuration with 0.100" (2.54mm) pitch spacing is identical for both parts.

Q: What is the current rating for this connector header?

A: Both the main part 103164-5 and substitute part 5-103164-5 are rated for 3A current per contact.

Q: Is the shrouding design the same for both parts?

A: Yes. Both parts feature shrouded design with 3-wall shrouding, providing mechanical protection and alignment during mating operations.