TE Connectivity 102694-4 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 102694-4 is a 12-position rectangular receptacle connector from the AMPMODU MT series, designed for IDC (Insulation Displacement Contact) termination with 22-26 AWG wire. This connector features gold-plated female socket contacts, a closed-end design, and free-hanging in-line mounting configuration. The part is currently active in production with 842 pieces available in inventory.

Identification of equivalent and substitute parts is necessary to ensure supply chain continuity, accommodate different compliance requirements, and provide alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

102694-4

TE Connectivity AMP ConnectorsIn Stock: 891102694-4 Datasheet

Current PartRFQ

5-102694-4

TE Connectivity AMP ConnectorsIn Stock: 17555-102694-4 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 102694-4 are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters:

Electrical Parameters:

• Connector type (Receptacle)
• Number of positions (12)
• Contact type (Female Socket)
• Contact finish (Gold)
• Wire gauge compatibility (22-26 AWG)

Mechanical Parameters:

• Pitch spacing (0.100" / 2.54mm)
• Number of rows (2)
• Row spacing (0.100" / 2.54mm)
• Mounting configuration (Free Hanging In-Line)
• Termination method (IDC)
• Closed-end design

Parts meeting all these criteria are classified as direct substitutes. Variations in compliance status, inventory levels, or packaging do not affect substitution eligibility when all electrical and mechanical parameters are identical.

Parameter Comparison

Engineering Selection Recommendations

Both the 102694-4 and 5-102694-4 are electrically and mechanically equivalent rectangular receptacle connectors from TE Connectivity's AMPMODU MT series. Selection between these parts should be based on the following criteria:

RoHS Compliance Requirement:

• If RoHS compliance is mandated by design specifications or regulatory requirements, the 5-102694-4 (RoHS Compliant) is the appropriate selection.
• If RoHS compliance is not required, either part is acceptable from a functional standpoint.

Supply Chain Considerations:

• The 5-102694-4 has higher inventory availability (1741 pieces) compared to the 102694-4 (842 pieces), providing greater supply security for high-volume applications.

Regulatory and Compliance Status:

• Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.8000) classifications.
• The 5-102694-4 has undefined REACH status from the vendor, while the 102694-4 is REACH Affected. Compliance verification with applicable regulations is required based on end-use application and geographic market.

Functional Equivalence:

• All electrical and mechanical parameters are identical, ensuring direct pin-for-pin and form-factor compatibility in existing designs.

Frequently Asked Questions (FAQ)

Q: Can the 5-102694-4 be used as a direct replacement for the 102694-4 in existing designs?

A: Yes. The 5-102694-4 is electrically and mechanically equivalent to the 102694-4. Both connectors have identical pin counts (12 positions), pitch spacing (0.100"), contact configuration (female socket), termination method (IDC), and wire gauge compatibility (22-26 AWG). No design modifications are required for substitution.

Q: What is the difference between the 102694-4 and 5-102694-4?

A: The primary difference is RoHS compliance status. The 5-102694-4 is RoHS Compliant, while the 102694-4 is RoHS non-compliant. All other electrical, mechanical, and dimensional specifications are identical. The 5-102694-4 also has higher inventory availability.

Q: Are these connectors compatible with both discrete and ribbon cable?

A: Yes. Both the 102694-4 and 5-102694-4 support discrete or ribbon cable termination via IDC (Insulation Displacement Contact) technology. Wire gauge must be within the 22-26 AWG range.

Q: What does "Closed End" mean for these connectors?

A: Closed End indicates that the connector housing has a sealed design that prevents accidental contact with the internal pins and provides strain relief for the cable termination.

Q: Can these connectors be used in applications requiring RoHS compliance?

A: Only the 5-102694-4 is RoHS Compliant and suitable for applications with RoHS requirements. The 102694-4 is RoHS non-compliant and should not be used in designs requiring RoHS certification.

Q: What is the pitch spacing of these connectors?

A: Both connectors have a pitch of 0.100 inches (2.54 millimeters) between contact positions. The row spacing is also 0.100 inches (2.54 millimeters), creating a 2-row, 6-position-per-row configuration.

Q: Are these connectors suitable for high-frequency applications?

A: The provided specifications do not include frequency ratings or impedance characteristics. Frequency suitability must be determined based on complete application requirements and detailed connector specifications from TE Connectivity.

Q: What is the contact finish thickness, and why is it important?

A: Both connectors have a gold contact finish with a thickness of 30.0 microinches (0.76 micrometers). This finish provides corrosion resistance and ensures reliable electrical contact over the connector's operational life.

Q: What is the Moisture Sensitivity Level (MSL) rating?

A: Both connectors have an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. These connectors can be stored and handled under standard environmental conditions without special moisture control measures.