TE Connectivity 102694-3 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 102694-3 is a 10-position rectangular receptacle connector from the AMPMODU MT series, designed for IDC (Insulation Displacement Contact) termination with 22-26 AWG wire. This connector features gold-plated female socket contacts, a closed-end design, and free-hanging in-line mounting configuration. The part is currently active in production with 1237 pieces available in inventory. Substitute parts are identified to address specific compliance requirements, inventory availability, or equivalent functional specifications for applications requiring this connector type.

Key Parameters

Parameter	Value
Connector Type	Receptacle
Contact Type	Female Socket
Number of Positions	10
Pitch	0.100" (2.54mm)
Number of Rows	2
Row Spacing	0.100" (2.54mm)
Cable Termination Method	IDC
Wire Gauge	22-26 AWG
Contact Finish	Gold
Contact Finish Thickness	30.0µin (0.76µm)
Mounting Type	Free Hanging (In-Line)
Features	Closed End
Color	Black
Series	AMPMODU MT

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 102694-3 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector type (Receptacle)
Contact type (Female Socket)
Number of positions (10)
Pitch (0.100" / 2.54mm)
Number of rows (2)
Row spacing (0.100" / 2.54mm)
Cable termination method (IDC)
Wire gauge range (22-26 AWG)
Contact finish (Gold)
Contact finish thickness (30.0µin / 0.76µm)
Mounting type (Free Hanging In-Line)
Features (Closed End)
Color (Black)
Series (AMPMODU MT)

Parts meeting all these parameters are classified as direct functional equivalents and may be substituted based on availability, compliance status, or inventory requirements.

Parameter Comparison

Parameter	102694-3 (Main Part)	1-102694-0 (Substitute)	Match Status
Manufacturer	TE Connectivity AMP Connectors	TE Connectivity AMP Connectors	Identical
Category	Rectangular Connectors	Rectangular Connectors	Identical
Series	AMPMODU MT	AMPMODU MT	Identical
Connector Type	Receptacle	Receptacle	Identical
Contact Type	Female Socket	Female Socket	Identical
Number of Positions	10	10	Identical
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Identical
Number of Rows	2	2	Identical
Row Spacing	0.100" (2.54mm)	0.100" (2.54mm)	Identical
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Identical
Cable Termination	IDC	IDC	Identical
Wire Type	Discrete or Ribbon Cable	Discrete or Ribbon Cable	Identical
Wire Gauge	22-26 AWG	22-26 AWG	Identical
Features	Closed End	Closed End	Identical
Contact Finish	Gold	Gold	Identical
Contact Finish Thickness	30.0µin (0.76µm)	30.0µin (0.76µm)	Identical
Color	Black	Black	Identical
Product Status	Active	Active	Identical
MSL Rating	1 (Unlimited)	1 (Unlimited)	Identical
ECCN	EAR99	EAR99	Identical
HTSUS Code	8536.69.8000	8536.69.8000	Identical
RoHS Status	RoHS non-compliant	ROHS3 Compliant	Different
REACH Status	REACH Affected	REACH Unaffected	Different
Inventory (Pcs)	1237	3983	Different

Engineering Selection Recommendations

102694-3 Selection Criteria: The TE Connectivity 102694-3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected material status does not present regulatory constraints. This part maintains full functional equivalence with substitute options and is available with moderate inventory levels.

1-102694-0 Selection Criteria: The TE Connectivity 1-102694-0 is the preferred selection for applications requiring ROHS3 compliance and REACH-unaffected material status. This substitute part provides identical electrical and mechanical specifications while meeting enhanced environmental and regulatory requirements. Higher inventory availability (3983 pieces) supports extended production runs and supply chain continuity.

Compliance-Based Selection: Applications subject to RoHS3 directives or REACH material restrictions must utilize part number 1-102694-0. Applications without such constraints may select either part based on inventory availability and procurement timelines.

Frequently Asked Questions (FAQ)

Q: Are the 102694-3 and 1-102694-0 electrically and mechanically interchangeable?

A: Yes. Both parts are 10-position rectangular receptacle connectors with identical pitch (0.100"), row configuration, IDC termination method, wire gauge range (22-26 AWG), gold contact finish, and closed-end design. They are direct functional equivalents for connector applications.

Q: What is the primary difference between these two part numbers?

A: The primary differences are regulatory compliance status and inventory availability. The 1-102694-0 is ROHS3 compliant and REACH unaffected, while the 102694-3 is RoHS non-compliant and REACH affected. The 1-102694-0 has higher inventory (3983 pieces versus 1237 pieces).

Q: Can I use the 102694-3 in an application requiring RoHS3 compliance?

A: No. The 102694-3 is RoHS non-compliant. Applications requiring RoHS3 compliance must use the 1-102694-0 substitute part.

Q: Are there any differences in contact finish or plating specifications?

A: No. Both parts feature gold contact finish with identical thickness of 30.0µin (0.76µm).

Q: Do these connectors support both discrete and ribbon cable termination?

A: Yes. Both the 102694-3 and 1-102694-0 support IDC termination for discrete or ribbon cable in the 22-26 AWG wire gauge range.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts have an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: Are there any differences in the base product number?

A: No. Both parts share the same base product number 102694, confirming they are variants of the same connector design.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message