TE Connectivity AMP Connectors 102617-8 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 102617-8 is a rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This connector features a 20-position configuration with 2.54mm (0.100") pitch spacing across 2 rows, utilizing shrouded 4-wall construction with male pin contacts and solder termination.

The 102617-8 is classified as an obsolete product. Locating equivalent substitute parts is necessary to support legacy system maintenance, repair operations, and continued component availability for existing designs utilizing this connector configuration.

Substiute Parts

102617-8

TE Connectivity AMP ConnectorsIn Stock: 915102617-8 Datasheet

Current PartRFQ

5-102617-8

TE Connectivity AMP ConnectorsIn Stock: 22965-102617-8 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 102617-8 are identified based on electrical and mechanical parameter equivalence within the rectangular connector category. The substitution logic is based on the following critical parameters:

Electrical Compatibility Parameters:

• Contact type (Male Pin)
• Number of positions (20)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Current rating (3A)
• Operating temperature range (-65°C ~ 105°C)

Mechanical Compatibility Parameters:

• Connector type (Header)
• Mounting type (Through Hole, Right Angle)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Contact finish - mating surface (Gold)
• Contact material (Phosphor Bronze)
• Insulation material (Thermoplastic)
• Flammability rating (UL94 V-0)

Substitute parts must maintain identical values across all listed parameters to ensure direct functional and mechanical interchangeability in existing circuit board designs and cable assemblies.

Parameter Comparison

Engineering Selection Recommendations

The 5-102617-8 is the direct substitute for the obsolete 102617-8 connector. Both parts maintain identical electrical and mechanical specifications across all critical parameters including contact configuration, pitch spacing, mounting orientation, termination method, and operating temperature range.

The primary distinction between these parts is product status and regulatory compliance. The 102617-8 is classified as obsolete and carries RoHS non-compliant and REACH-affected designations. The 5-102617-8 is an active product with RoHS compliance and REACH unaffected status, making it suitable for new designs and applications subject to environmental regulations.

A secondary difference exists in the contact finish of the solder post: the 102617-8 uses Tin-Lead finish while the 5-102617-8 uses Tin finish. Both finishes maintain the same thickness specification of 100.0µin (2.54µm) and are compatible with standard solder reflow processes.

The 5-102617-8 is supplied in tray packaging, whereas packaging information for the 102617-8 is not specified in the available data.

For applications requiring component replacement or new procurement, the 5-102617-8 is the appropriate selection due to its active product status and regulatory compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the 5-102617-8 be used as a direct replacement for the 102617-8 in existing designs?

A: Yes. The 5-102617-8 maintains identical electrical and mechanical specifications across all critical parameters. Both connectors feature 20 positions, 2.54mm pitch spacing, through-hole right-angle mounting, shrouded 4-wall construction, and identical contact materials and finishes on the mating surface. The connectors are functionally and mechanically interchangeable.

Q: What is the difference in contact finish between these two parts?

A: The 102617-8 uses Tin-Lead finish on the solder post, while the 5-102617-8 uses Tin finish. Both maintain the same thickness specification of 100.0µin (2.54µm). The Tin finish on the 5-102617-8 reflects modern lead-free manufacturing practices and is compatible with standard solder reflow processes.

Q: Why is the 102617-8 listed as obsolete?

A: The 102617-8 has been discontinued by TE Connectivity AMP Connectors. The 5-102617-8 is the active product replacement that maintains the same connector specifications while incorporating current manufacturing standards and regulatory compliance.

Q: What are the RoHS and REACH compliance differences?

A: The 102617-8 is RoHS non-compliant and REACH-affected. The 5-102617-8 is RoHS compliant and REACH unaffected. For applications subject to environmental regulations or procurement policies requiring RoHS compliance, the 5-102617-8 is the appropriate selection.

Q: Are there packaging differences between these parts?

A: The 5-102617-8 is supplied in tray packaging. Packaging information for the 102617-8 is not specified in the available technical data.

Q: What is the current rating for these connectors?

A: Both the 102617-8 and 5-102617-8 are rated for 3A continuous current.

Q: What is the operating temperature range?

A: Both connectors operate across the temperature range of -65°C to 105°C.

Q: Are these connectors suitable for board-to-board and cable applications?

A: Yes. Both connectors are classified as board-to-board or cable style connectors with solder termination for through-hole mounting.