TE Connectivity 102398-5 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 102398-5 is a 14-position rectangular receptacle connector from the AMPMODU MT series, designed for IDC (Insulation Displacement Contact) termination with 22-26 AWG discrete or ribbon cable. This connector features gold-plated female socket contacts, a closed-end design, and free-hanging in-line mounting configuration. The part is currently active in production with 1093 units in stock. Substitute parts are identified to address supply chain requirements, compliance variations, and inventory availability while maintaining electrical and mechanical compatibility.

Substiute Parts

102398-5

TE Connectivity AMP ConnectorsIn Stock: 1106102398-5 Datasheet

Current PartRFQ

5-102398-5

TE Connectivity AMP ConnectorsIn Stock: 8045-102398-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 102398-5 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

• 14-position configuration with 0.100" (2.54mm) pitch
• 2-row arrangement with 0.100" (2.54mm) row spacing
• Female socket contact type
• Gold contact finish at 30.0µin (0.76µm) thickness
• IDC cable termination for 22-26 AWG wire

Mechanical Compatibility Parameters:

• Rectangular receptacle connector form factor
• Free-hanging in-line mounting
• Closed-end design
• Black color

Environmental & Regulatory Parameters:

• Moisture Sensitivity Level 1 (Unlimited)
• AMPMODU MT series designation

The substitute part 5-102398-5 maintains complete equivalence across all electrical and mechanical parameters. Variations exist only in RoHS compliance status, REACH regulatory classification, and HTSUS commodity code, which do not affect functional interchangeability in the connector interface itself.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (102398-5): The original TE Connectivity 102398-5 is the primary specification for applications where RoHS non-compliant components are acceptable. This part carries REACH Affected status and is suitable for legacy systems, non-regulated applications, or environments where RoHS exemptions apply. Current inventory of 1093 units supports immediate procurement requirements.

Substitute Selection (5-102398-5): The 5-102398-5 variant is the direct substitute for applications requiring RoHS compliance and REACH Unaffected regulatory status. This part maintains complete electrical and mechanical equivalence while satisfying modern environmental and regulatory requirements. The part is active in production with 751 units in stock. Selection of this variant is appropriate for new designs, regulated industries, and applications subject to RoHS Directive 2011/65/EU or equivalent regional requirements.

Interchangeability: Both parts are electrically and mechanically interchangeable at the connector interface level. Selection between them is determined solely by regulatory compliance requirements applicable to the end application, not by functional performance or physical compatibility.

Frequently Asked Questions (FAQ)

Q: Are the 102398-5 and 5-102398-5 connectors physically interchangeable?

A: Yes. Both connectors are physically and electrically interchangeable. They share identical pitch (0.100"), row spacing (0.100"), position count (14), contact type (female socket), and mounting configuration (free-hanging in-line). The connectors will mate with the same complementary plug connectors and accept the same 22-26 AWG IDC cable terminations.

Q: What is the difference between these two part numbers?

A: The primary differences are regulatory compliance classifications. The 102398-5 is RoHS non-compliant and REACH Affected. The 5-102398-5 is RoHS Compliant and REACH Unaffected. Both parts are functionally identical and perform the same electrical function. The differences reflect manufacturing process variations and material sourcing that affect regulatory status, not connector performance.

Q: Which part should I specify for a new design?

A: Specify the 5-102398-5 for new designs unless specific regulatory exemptions or legacy system requirements mandate the non-compliant variant. The RoHS-compliant version (5-102398-5) aligns with current environmental regulations and reduces future compliance risks.

Q: Can I mix these connectors in the same assembly?

A: Yes. Since both connectors are electrically and mechanically equivalent, they can be used interchangeably within the same assembly. However, for traceability and compliance documentation purposes, it is standard practice to maintain consistent part number usage within a single production lot or design revision.

Q: What wire gauges are compatible with these connectors?

A: Both connectors accept 22-26 AWG discrete or ribbon cable using IDC (Insulation Displacement Contact) termination. Wire gauge selection must fall within this range for proper contact engagement and electrical performance.

Q: Are these connectors suitable for high-reliability applications?

A: Both connectors carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions. The gold contact finish (30.0µin thickness) provides corrosion resistance suitable for general industrial and commercial applications. Specific reliability requirements should be evaluated against application environmental conditions and performance standards.

Q: What is the pitch specification, and why does it matter?

A: The pitch is 0.100" (2.54mm), which is the center-to-center distance between adjacent contact positions. This specification is critical for mechanical compatibility with mating connectors and PCB footprints. Any connector substitute must maintain identical pitch to ensure proper mating and alignment.