TE Connectivity 102393-5 Rectangular Connector Equivalent & Substitute Parts

Part Overview

The TE Connectivity 102393-5 is a 14-position rectangular receptacle connector from the AMPMODU MT series, designed for IDC (Insulation Displacement Contact) termination with 26-30 AWG wire. This connector features gold-plated female socket contacts, a closed-end design, and free-hanging in-line mounting configuration. The part is currently active in production with 923 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

102393-5

TE Connectivity AMP ConnectorsIn Stock: 963102393-5 Datasheet

Current PartRFQ

5-102393-5

TE Connectivity AMP ConnectorsIn Stock: 11335-102393-5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TE Connectivity 102393-5 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector type: Rectangular receptacle
• Number of positions: 14
• Contact type: Female socket
• Pitch: 0.100" (2.54mm)
• Number of rows: 2
• Row spacing: 0.100" (2.54mm)
• Cable termination method: IDC
• Wire gauge range: 26-30 AWG
• Contact finish: Gold
• Contact finish thickness: 30.0µin (0.76µm)
• Mounting type: Free hanging (in-line)
• Features: Closed end
• Color: Black
• Series: AMPMODU MT

All identified substitute parts maintain complete electrical and mechanical compatibility with the primary part number across these parameters. Substitutes are sourced from the same manufacturer and series, ensuring form, fit, and function equivalence.

Parameter Comparison

Engineering Selection Recommendations

Both the primary part number 102393-5 and the substitute part number 5-102393-5 are active products from TE Connectivity AMP Connectors within the AMPMODU MT series. They are electrically and mechanically identical across all specified parameters.

Compliance Considerations:

The primary part 102393-5 carries a "Not applicable" RoHS status with "REACH Affected" designation. The substitute part 5-102393-5 is marked as "RoHS Compliant" with "Vendor Undefined" REACH status. Selection between these parts should be based on specific regulatory requirements applicable to the end application and target market.

Both parts maintain identical moisture sensitivity levels (MSL 1 - Unlimited), export classification (EAR99), and tariff codes (8536.69.8000), indicating equivalent handling and logistics characteristics.

The substitute part 5-102393-5 currently has higher inventory availability (1091 units versus 923 units), which may influence sourcing decisions based on lead time and supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Are the 102393-5 and 5-102393-5 connectors mechanically interchangeable?

A: Yes. Both connectors are identical in form factor, with matching pitch (0.100"), row configuration (2 rows), position count (14), and mounting type (free hanging in-line). They will mate with identical plug connectors and occupy the same physical space in assemblies.

Q: Can these connectors be used interchangeably in the same circuit board design?

A: Yes. The connectors are electrically equivalent with identical contact type (female socket), contact finish (gold at 30.0µin thickness), and wire gauge compatibility (26-30 AWG). IDC termination characteristics are identical, ensuring equivalent signal integrity and current-carrying capacity.

Q: What is the significance of the different RoHS designations between the two parts?

A: The primary part (102393-5) is marked "Not applicable" for RoHS, while the substitute (5-102393-5) is "RoHS Compliant." This difference reflects regulatory classification at the time of data entry. For applications requiring RoHS compliance certification, the 5-102393-5 designation provides explicit compliance confirmation.

Q: Are there any differences in wire termination capability between these parts?

A: No. Both parts use identical IDC (Insulation Displacement Contact) termination technology and support the same wire gauge range (26-30 AWG). They accept both discrete and ribbon cable configurations without distinction.

Q: What does the closed-end feature mean for these connectors?

A: The closed-end design indicates that unused contact positions are sealed, preventing accidental contact insertion and providing mechanical protection. This feature is identical on both the primary and substitute parts.

Q: How do the REACH and export classifications affect part selection?

A: Both parts carry identical ECCN (EAR99) and HTSUS (8536.69.8000) classifications, indicating equivalent export control and tariff treatment. REACH status differences (REACH Affected versus Vendor Undefined) should be evaluated against specific supply chain and regulatory requirements for the target market.

Q: Is there a performance difference between the two part numbers?

A: No. Both parts are functionally and electrically identical. Differences exist only in inventory levels, RoHS designation, and REACH status documentation. Performance characteristics, including contact resistance, current rating, and signal integrity, are equivalent.