3M 10236-55G3VC D-Sub 36-Position Receptacle Connector Equivalent & Substitute Parts

Part Overview

The 3M 10236-55G3VC is a 36-position Mini D Ribbon (MDR) receptacle connector designed for panel mount, through-hole, right-angle solder termination applications. This connector features outer shroud contacts, board lock, and shielding with gold-plated contacts. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations.

Substiute Parts

10236-55G3VC

3MIn Stock: 114010236-55G3VC Datasheet

Current PartRFQ

10236-55G3PC

3MIn Stock: 149610236-55G3PC Datasheet

DirectRFQ

DX10G1M-36S(50)

Hirose Electric Co LtdIn Stock: 898DX10G1M-36S(50) Datasheet

MFR RecommendedRFQ

DX10G1M-36SE(50)

Hirose Electric Co LtdIn Stock: 1082DX10G1M-36SE(50) Datasheet

MFR RecommendedRFQ

DX10M-36S(50)

Hirose Electric Co LtdIn Stock: 1246DX10M-36S(50) Datasheet

MFR RecommendedRFQ

DX10M-36SE(50)

Hirose Electric Co LtdIn Stock: 1157DX10M-36SE(50) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the 10236-55G3VC is determined by the following critical parameters that must remain consistent:

• Connector Type & Position Count: Receptacle, 36 positions, 2 rows
• Mounting Configuration: Panel mount, through-hole, right-angle orientation
• Termination Method: Solder
• Connector Style: Outer shroud contacts
• Flange Feature: Housing/Shell (M2.6)
• Contact Finish: Gold plating

Substitute parts are grouped into two categories:

Category 1 - Direct 3M Series 102 Equivalent: The 10236-55G3PC is the direct active production equivalent from 3M, maintaining identical electrical and mechanical specifications while offering improved RoHS3 compliance and active product status.

Category 2 - Hirose DXM/DX Series Cross-Manufacturer Substitutes: The Hirose DX10G1M-36S(50), DX10G1M-36SE(50), DX10M-36S(50), and DX10M-36SE(50) are miniature high-density (HD) receptacle connectors that maintain the same 36-position, 2-row configuration, panel mount through-hole right-angle solder termination, and outer shroud contact style. These parts differ in connector series designation and specific feature sets (board lock presence/absence) but satisfy the core electrical and mechanical substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): The 3M 10236-55G3PC is the recommended substitute for the obsolete 10236-55G3VC. Both parts maintain identical electrical and mechanical specifications within the 3M Series 102 MDR platform. The 10236-55G3PC offers active product status and ROHS3 compliance, making it suitable for new designs and legacy system support.

For Cross-Manufacturer Substitution: Hirose DXM and DX series connectors (DX10G1M-36S(50), DX10G1M-36SE(50), DX10M-36S(50), DX10M-36SE(50)) are acceptable substitutes when 3M parts are unavailable. These connectors maintain the core 36-position, 2-row receptacle configuration with panel mount through-hole right-angle solder termination. All Hirose alternatives carry active product status and RoHS compliance. Selection between Hirose variants should be based on board lock feature requirements: DX10G1M-36SE(50) and DX10M-36SE(50) include board lock, while DX10G1M-36S(50) and DX10M-36S(50) do not.

Note: DX10M-36S(50) specifies mating side flange feature rather than housing/shell; verify mechanical fit in your application before selection.

Frequently Asked Questions (FAQ)

Q: Can the 10236-55G3PC be used as a direct replacement for the 10236-55G3VC? A: Yes. Both parts are 3M Series 102 MDR receptacles with identical 36-position, 2-row configurations, panel mount through-hole right-angle solder termination, and outer shroud contacts. The 10236-55G3PC is the active production equivalent with improved RoHS3 compliance.

Q: What is the difference between the Hirose DXM and DX series substitutes? A: Both series maintain the required 36-position, 2-row receptacle configuration with matching mounting and termination specifications. The primary distinction is series designation (DXM vs. DX) and specific feature availability. DX10M-36S(50) uses a mating side flange feature, while other variants use housing/shell flanges. Verify mechanical compatibility with your panel mount application.

Q: Do all substitute parts include board lock features? A: No. The 3M 10236-55G3PC includes board lock and shielding. Among Hirose substitutes, DX10G1M-36SE(50) and DX10M-36SE(50) include board lock, while DX10G1M-36S(50) and DX10M-36S(50) do not. Select based on your mechanical retention requirements.

Q: Are all substitute parts RoHS compliant? A: The 10236-55G3VC is RoHS non-compliant. The 10236-55G3PC is ROHS3 compliant. Hirose DX10G1M-36S(50) and DX10G1M-36SE(50) are ROHS3 compliant. Hirose DX10M-36S(50) and DX10M-36SE(50) are RoHS compliant. Verify compliance requirements for your application.

Q: What is the contact finish specification for all parts? A: All parts feature gold-plated contacts. The 10236-55G3VC and 10236-55G3PC specify 30.0µin (0.76µm) contact finish thickness. Hirose parts do not specify contact finish thickness in the provided data.

Q: Are there packaging differences between substitute parts? A: The 10236-55G3VC packaging is not specified. The 10236-55G3PC and all Hirose substitutes are supplied in tray packaging. Confirm packaging requirements for your procurement and assembly processes.