Rosenberger 102294 SMP Straight Plug PCB Coaxial Connector Equivalent & Substitute Parts

Part Overview

The Rosenberger 102294 is an SMP connector plug designed for surface mount applications in RF coaxial systems. This male pin connector operates at 50 ohms impedance and supports frequencies up to 26.5 GHz, making it suitable for high-frequency PCB assembly applications. The part is currently active in production with 1092 pieces in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements necessitate alternative manufacturers or specifications.

Substiute Parts

102294

RosenbergerIn Stock: 1186102294 Datasheet

Current PartRFQ

19S10H-40ML5

RosenbergerIn Stock: 1011319S10H-40ML5 Datasheet

Parametric EquivalentRFQ

CONSMP001-SMD-G-T

TE Connectivity LinxIn Stock: 4986CONSMP001-SMD-G-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Rosenberger 102294 are qualified based on strict electrical and mechanical parameter alignment. The following parameters must match identically for substitution eligibility:

• Connector Style: SMP
• Connector Type: Plug, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Surface Mount
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 26.5 GHz
• Fastening Type: Snap-On
• Number of Ports: 1
• Operating Temperature Range: -65°C to 155°C
• Packaging: Tape & Reel (TR)
• Dielectric Material: Liquid Crystal Polymer (LCP)
• Body Material: Brass
• Body Finish: Gold
• Center Contact Material: Brass
• Center Contact Plating: Gold
• Housing Color: Gold
• Features: Limited Detent

All identified substitute parts meet these core electrical and mechanical requirements, ensuring functional compatibility in 50-ohm RF coaxial applications.

Parameter Comparison

Engineering Selection Recommendations

Rosenberger 19S10H-40ML5 is a parametric equivalent to the Rosenberger 102294. Both parts are manufactured by Rosenberger and share identical electrical and mechanical specifications. The 19S10H-40ML5 carries RoHS compliance certification and maintains the same 500 mating cycle rating and 335 V voltage specification. This part is suitable for direct substitution in applications where Rosenberger sourcing is preferred and higher inventory availability is beneficial.

TE Connectivity Linx CONSMP001-SMD-G-T is a cross-manufacturer equivalent that meets all core electrical and mechanical requirements for 50-ohm SMP surface mount applications. This part carries ROHS3 compliance and features a higher voltage rating of 500 V. However, the mating cycle rating is 100 cycles compared to 500 cycles for the primary part. This part is suitable for substitution in applications where cross-manufacturer sourcing is acceptable and the reduced mating cycle specification does not conflict with design requirements.

All three parts are active products with current production status and comply with export control classifications (EAR99) and tariff codes (8536.69.4010).

Frequently Asked Questions (FAQ)

Q: Can the Rosenberger 19S10H-40ML5 be used as a direct replacement for the Rosenberger 102294?

A: Yes. Both parts share identical electrical specifications (50 ohms, 26.5 GHz maximum frequency), mechanical configuration (SMP plug, male pin, surface mount solder termination), operating temperature range (-65°C to 155°C), and packaging (Tape & Reel). The 19S10H-40ML5 is a parametric equivalent suitable for direct substitution.

Q: What are the differences between the Rosenberger 102294 and the TE Connectivity Linx CONSMP001-SMD-G-T?

A: The primary differences are manufacturer (Rosenberger versus TE Connectivity Linx), voltage rating (335 V versus 500 V), and mating cycle rating (500 versus 100). All other electrical and mechanical parameters are identical. The TE Connectivity part is suitable for substitution in applications where the reduced mating cycle specification is acceptable.

Q: Are all three parts RoHS compliant?

A: The Rosenberger 102294 and TE Connectivity Linx CONSMP001-SMD-G-T are ROHS3 compliant. The Rosenberger 19S10H-40ML5 is RoHS compliant. All three parts meet environmental compliance requirements for their respective certifications.

Q: What is the maximum operating frequency for these connectors?

A: All three parts support a maximum frequency of 26.5 GHz, making them suitable for high-frequency RF coaxial applications up to this specification.

Q: Are these parts available in Tape & Reel packaging?

A: Yes. All three parts are supplied in Tape & Reel (TR) packaging, suitable for automated PCB assembly processes.

Q: What is the impedance specification for these SMP connectors?

A: All three parts are rated at 50 ohms impedance, the standard specification for RF coaxial connectors in this category.

Q: Can these parts be used interchangeably in the same PCB design?

A: Yes, provided the design does not have specific constraints related to mating cycle requirements or voltage rating specifications. The Rosenberger 19S10H-40ML5 is a direct parametric equivalent. The TE Connectivity Linx CONSMP001-SMD-G-T is compatible with the same electrical and mechanical interface but features different mating cycle and voltage ratings.