TE Connectivity AMP Connectors 102241-2 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 102241-2 is a 4-position rectangular connector receptacle housing designed for 0.100" (2.54mm) pitch applications. This component functions as a female socket receptacle with crimp-type contact termination and locking ramp fastening. The part is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where connector housing compatibility is required.

Key Parameters

Parameter	Value
Connector Type	Receptacle
Contact Type	Female Socket
Number of Positions	4
Pitch	0.100" (2.54mm)
Number of Rows	1
Mounting Type	Free Hanging (In-Line)
Contact Termination	Crimp
Fastening Type	Locking Ramp
Color	Black
Operating Temperature Range	-65°C ~ 105°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 102241-2 are identified based on strict parametric equivalence across the following critical criteria:

Electrical and Mechanical Compatibility Parameters:

Connector type (Receptacle)
Contact type (Female Socket)
Number of positions (4)
Pitch specification (0.100" / 2.54mm)
Number of rows (1)
Mounting configuration (Free Hanging In-Line)
Contact termination method (Crimp)
Fastening mechanism (Locking Ramp)
Housing color (Black)

Compliance and Environmental Parameters:

RoHS3 compliance status
Moisture sensitivity level (MSL 1)
Operating temperature range compatibility

The Molex 0901560144 meets all core electrical and mechanical parameters required for direct substitution. Both parts function as 4-position receptacle housings with identical pitch, mounting type, and termination specifications. Compliance certifications align across RoHS3 and MSL ratings, confirming suitability for equivalent applications.

Parameter Comparison

Parameter	TE Connectivity 102241-2	Molex 0901560144	Compatibility
Manufacturer Part Number	102241-2	0901560144	Different manufacturers
Connector Type	Receptacle	Receptacle	Equivalent
Contact Type	Female Socket	Female Socket	Equivalent
Number of Positions	4	4	Equivalent
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Equivalent
Number of Rows	1	1	Equivalent
Mounting Type	Free Hanging (In-Line)	Free Hanging (In-Line)	Equivalent
Contact Termination	Crimp	Crimp	Equivalent
Fastening Type	Locking Ramp	Locking Ramp	Equivalent
Color	Black	Black	Equivalent
Insulation Material	Polyamide (PA), Nylon, Glass Filled	Polyphenylene Oxide (PPO)	Different materials, same function
Operating Temperature Range	-65°C ~ 105°C	-55°C ~ 105°C	Molex range narrower at low end
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	Equivalent
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent
Product Status	Active	Active	Equivalent

Engineering Selection Recommendations

Both the TE Connectivity 102241-2 and Molex 0901560144 are Active product status components with full RoHS3 compliance and MSL 1 ratings. Selection between these parts is based on the following engineering considerations:

TE Connectivity 102241-2 (AMPMODU Mod IV Series):

Polyamide nylon glass-filled insulation material
Extended low-temperature operating range (-65°C to 105°C)
Suitable for applications requiring broader temperature extremes

Molex 0901560144 (C-Grid III 90156 Series):

Polyphenylene oxide (PPO) insulation material
Operating temperature range -55°C to 105°C
Suitable for standard industrial and commercial temperature environments

Both parts share identical electrical and mechanical specifications for the 4-position, 2.54mm pitch receptacle housing configuration. The choice between manufacturers depends on application-specific temperature requirements, material compatibility with adjacent components, and supply chain availability. Both parts are compliant with current regulatory standards and carry unlimited moisture sensitivity ratings.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0901560144 directly replace the TE Connectivity 102241-2 in all applications?

A: The Molex 0901560144 provides direct substitution for applications operating within the -55°C to 105°C temperature range. Applications requiring operation below -55°C must use the TE Connectivity 102241-2 due to its extended low-temperature specification of -65°C.

Q: Are the insulation materials interchangeable between these two parts?

A: Both parts use different insulation materials (polyamide nylon glass-filled versus polyphenylene oxide). Both materials meet the same functional requirements for this connector housing category and are suitable for equivalent electrical performance. Material selection should consider compatibility with adjacent assembly components and specific environmental exposure conditions.

Q: Do both parts require the same contact specifications?

A: Yes. Both the TE Connectivity 102241-2 and Molex 0901560144 are 4-position receptacle housings designed for crimp-type contacts with 0.100" (2.54mm) pitch. Contacts are not included with either housing and must be sourced separately. Ensure selected contacts match the crimp termination specification.

Q: What is the significance of the locking ramp fastening type?

A: The locking ramp fastening mechanism provides mechanical retention between mating connector halves. Both parts incorporate identical locking ramp fastening, ensuring compatible mating with corresponding plug connectors designed for this fastening interface.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the TE Connectivity 102241-2 and Molex 0901560144 carry full RoHS3 compliance certification, meeting current regulatory requirements for restricted substance elimination in electronic components.

Q: What does MSL 1 (Unlimited) moisture sensitivity rating mean?

A: MSL 1 indicates the lowest moisture sensitivity level. These components do not require special moisture control during storage, handling, or assembly. No baking or desiccant storage procedures are necessary prior to soldering or assembly operations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message