TE Connectivity AMP Connectors 102162-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 102162-7 is a rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This shrouded 30-position connector operates within the -65°C to 105°C temperature range and is rated for 1A per contact at 250VAC. The connector features a 0.100" (2.54mm) pitch with male pin contacts, gold or gold-palladium mating finish, and tin-lead post finish. The part is currently active in production. Substitute parts are identified to address specific compliance requirements, inventory availability, or manufacturing process variations while maintaining electrical and mechanical compatibility.

Substiute Parts

102162-7

TE Connectivity AMP ConnectorsIn Stock: 906102162-7 Datasheet

Current PartRFQ

5102162-7

TE Connectivity AMP ConnectorsIn Stock: 8835102162-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 102162-7 are identified based on strict electrical and mechanical parameter matching. The primary substitution criterion is the maintenance of identical connector geometry, pitch spacing, position count, and contact configuration. All substitute parts must operate within the same temperature range (-65°C to 105°C), support the same current rating (1A per contact), and voltage rating (250VAC). The connector type, mounting style (through-hole right-angle), shrouding configuration (shrouded 4-wall), and contact material (brass with gold or gold-palladium mating finish) must remain consistent.

The TE Connectivity 5102162-7 qualifies as a direct substitute based on these parameters. Variations in post-finish material (tin versus tin-lead) and compliance status do not affect the core electrical and mechanical compatibility of the connector in standard applications. Both parts share the AMP-Latch series designation, identical dimensional specifications, and equivalent performance characteristics within the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 5102162-7 serves as a direct electrical and mechanical substitute for the 102162-7 across all standard applications requiring a 30-position, 2.54mm pitch rectangular connector header with through-hole right-angle mounting. Both parts maintain identical contact geometry, pitch spacing, current and voltage ratings, and operating temperature specifications.

The primary distinction between these parts relates to regulatory compliance status. The 5102162-7 is ROHS3 compliant and REACH unaffected, whereas the 102162-7 is RoHS non-compliant and REACH affected. For applications subject to RoHS3 or REACH regulatory requirements, the 5102162-7 is the appropriate selection. For applications without such regulatory constraints, either part is functionally equivalent.

The post-finish material variation (tin-lead in 102162-7 versus tin in 5102162-7) does not affect electrical performance or mechanical compatibility. Both finishes provide equivalent solderability and contact reliability within the specified operating parameters.

Frequently Asked Questions (FAQ)

Q: Are the 102162-7 and 5102162-7 mechanically interchangeable?

A: Yes. Both connectors share identical dimensional specifications, including pitch (0.100"/2.54mm), position count (30), row configuration (2 rows), contact geometry, and mounting style (through-hole right-angle). They are mechanically interchangeable in all applications.

Q: What is the difference between the post-finish materials?

A: The 102162-7 features a tin-lead post finish, while the 5102162-7 uses tin. Both finishes provide equivalent solderability and contact reliability. The selection between them is typically driven by regulatory compliance requirements rather than performance considerations.

Q: Which part should be selected for RoHS3-compliant applications?

A: The TE Connectivity 5102162-7 is ROHS3 compliant and is the appropriate selection for applications subject to RoHS3 regulatory requirements. The 102162-7 is RoHS non-compliant.

Q: Are there any electrical performance differences between these parts?

A: No. Both parts are rated for 1A per contact at 250VAC and operate within the identical temperature range of -65°C to 105°C. Electrical performance is equivalent.

Q: What is the significance of the REACH status difference?

A: The 5102162-7 is REACH unaffected, while the 102162-7 is REACH affected. For applications subject to REACH regulatory requirements, the 5102162-7 is the appropriate selection. REACH compliance status does not affect electrical or mechanical performance.

Q: Can these connectors be used in high-temperature applications?

A: Both connectors are rated for operation up to 105°C and down to -65°C. They are suitable for applications within this temperature envelope.

Q: What is the current-carrying capacity of each contact?

A: Each contact in both the 102162-7 and 5102162-7 is rated for 1A. The total current capacity depends on the number of contacts utilized in the application.

Q: Are these connectors suitable for board-to-cable applications?

A: Yes. Both connectors are classified as board-to-cable/wire style connectors and are designed for this application type.