TE Connectivity AMP Connectors 102159-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 102159-7 is a rectangular connector header designed for through-hole, right-angle board-to-cable/wire applications. This shrouded 30-position connector operates within the -65°C to 105°C temperature range and is rated for 1A per contact at 250VAC. The connector features a 0.100" (2.54mm) pitch with 2 rows and includes keying slot and mounting flange features for secure mechanical engagement. The part is currently active in production with 908 pieces available in new original stock.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when supply chain constraints occur, or when alternative compliance certifications are required for specific applications.

Substiute Parts

102159-7

TE Connectivity AMP ConnectorsIn Stock: 927102159-7 Datasheet

Current PartRFQ

5102159-7

TE Connectivity AMP ConnectorsIn Stock: 9795102159-7 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of rectangular connectors is determined by strict equivalence across electrical and mechanical parameters. The following criteria establish whether a part qualifies as a direct substitute for the TE Connectivity 102159-7:

Critical Matching Parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (30)
• Number of rows (2)
• Pitch - mating (0.100" / 2.54mm)
• Row spacing - mating (0.100" / 2.54mm)
• Mounting type (Through Hole, Right Angle)
• Shrouding configuration (Shrouded - 4 Wall)
• Fastening type (Push-Pull)
• Current rating (1A per Contact)
• Voltage rating (250VAC)
• Operating temperature range (-65°C ~ 105°C)
• Material flammability rating (UL94 V-0)

Parts meeting all these parameters are classified as direct substitutes. Variations in contact finish specifications, RoHS compliance status, or REACH classification do not affect mechanical or electrical interchangeability when all critical parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 102159-7 and 5102159-7 are direct electrical and mechanical equivalents. Both parts are active products manufactured by TE Connectivity within the AMP-Latch series and share identical connector specifications, contact configurations, and performance ratings.

Compliance Considerations:

The primary distinction between these parts is regulatory compliance status. The 102159-7 is RoHS non-compliant and REACH Affected, while the 5102159-7 is ROHS3 Compliant and REACH Unaffected. Applications subject to RoHS3 or REACH regulations require the 5102159-7 variant.

Contact Finish Specification:

The 102159-7 specifies Tin-Lead post finish, while the 5102159-7 specifies Tin post finish. Both maintain identical contact finish thickness (100.0µin / 2.54µm) and mating surface finish (Gold or Gold-Palladium at 15.0µin / 0.38µm). This distinction reflects lead-free manufacturing practices in the 5102159-7 variant.

Selection Basis:

For applications without regulatory compliance requirements, either part is functionally equivalent. For applications requiring RoHS3 or REACH compliance, the 5102159-7 is the appropriate selection. Both parts operate identically across all electrical parameters, mechanical dimensions, and environmental specifications.

Frequently Asked Questions (FAQ)

Q: Are the 102159-7 and 5102159-7 mechanically interchangeable?

A: Yes. Both parts are identical in all mechanical dimensions, mounting configuration, and connector geometry. The 30-position, 2-row header with 0.100" pitch, through-hole right-angle mounting, and shrouded 4-wall design are identical across both part numbers.

Q: What is the difference between Tin-Lead and Tin post finish?

A: The 102159-7 uses Tin-Lead post finish, while the 5102159-7 uses Tin post finish. Both finishes maintain the same thickness specification (100.0µin / 2.54µm) and provide equivalent electrical performance. The Tin finish in the 5102159-7 reflects lead-free manufacturing compliance.

Q: Can I use the 5102159-7 as a substitute for the 102159-7 in existing designs?

A: Yes. The 5102159-7 is a direct substitute for the 102159-7 in all applications. The parts are electrically and mechanically equivalent. If your application does not require RoHS3 or REACH compliance, either part functions identically.

Q: Which part should I specify for new designs?

A: For new designs, specify the 5102159-7. This part is ROHS3 Compliant and REACH Unaffected, providing compliance with current regulatory requirements and future-proofing against evolving environmental regulations.

Q: Are there any performance differences between these parts?

A: No. Both parts operate at identical current ratings (1A per contact), voltage ratings (250VAC), and temperature ranges (-65°C to 105°C). All electrical and thermal performance characteristics are equivalent.

Q: What is the pitch specification for these connectors?

A: Both connectors feature a 0.100" (2.54mm) mating pitch with 0.100" (2.54mm) row spacing. This standard pitch is compatible with industry-standard 0.100" spacing PCB layouts and mating receptacles.

Q: Are these connectors keyed?

A: Yes. Both the 102159-7 and 5102159-7 include keying slot features and mounting flanges for secure mechanical engagement and polarization control.

Q: What is the current rating per contact?

A: Both connectors are rated for 1A per contact at 250VAC. Total current capacity depends on the number of loaded positions and application-specific thermal management.

Q: What mounting method is used?

A: Both connectors use through-hole solder termination with right-angle mounting orientation. The solder posts are designed for standard PCB assembly processes.

Q: Are these parts available in stock?

A: Both the 102159-7 and 5102159-7 are active products with 908 pieces available in new original stock.