CONN INSERT HBE24 MALE (10196000)

Part Overview

The LAPP 10196000 is an active male insert connector for heavy-duty applications, featuring 24 positions plus ground contact with screw termination. This component is part of the EPIC® HBE connector series and is designed for industrial environments requiring robust electrical connections. The part is ROHS3 compliant and maintains full operational capability across extended temperature ranges. Alternative components may be required due to inventory constraints, application-specific housing compatibility, or supply chain considerations.

Substiute Parts

10196000

LAPPIn Stock: 116510196000 Datasheet

Current PartRFQ

09330242601

HARTINGIn Stock: 153309330242601 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10196000 is determined by strict equivalence across the following critical parameters:

• Connector type (Insert)
• Gender (Male)
• Position count (24+Ground)
• Termination method (Screw)
• Voltage rating (600V minimum)
• Current rating (16A minimum)
• Operating temperature range (-40°C to 125°C minimum)
• Housing material (Polycarbonate)
• Contact material (Copper Alloy)
• Contact finish (Silver)
• Flammability rating (UL94 V-0)
• Regulatory compliance (ROHS3, REACH Unaffected)

The HARTING 09330242601 meets all substitution criteria as a functionally equivalent male insert with identical electrical ratings, material specifications, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 10196000 and HARTING 09330242601 are active products with identical electrical specifications, material compositions, and regulatory certifications. Selection between these components should be based on:

• Connector housing compatibility with existing EPIC® HBE or Han® E systems
• Availability and lead time requirements
• Established supplier relationships and procurement processes
• Physical form factor differences (LAPP HB24 size versus HARTING 24B size) relative to mating housing specifications

Both components satisfy all technical and compliance requirements for equivalent application in 600V, 16A heavy-duty connector systems.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09330242601 directly replace the LAPP 10196000 in existing assemblies?

A: Direct mechanical compatibility depends on the mating housing connector series. The LAPP component is designed for EPIC® HBE housings, while the HARTING component is designed for Han® E housings. Electrical and functional specifications are equivalent, but physical form factors differ. Verify housing compatibility before substitution.

Q: Are there any differences in screw termination between these two inserts?

A: Both components use screw termination with identical electrical performance characteristics. Termination procedures should follow the respective manufacturer's specifications for each connector series.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the LAPP 10196000 and HARTING 09330242601 are ROHS3 compliant, REACH unaffected, and carry UL94 V-0 flammability ratings. Both are rated for 600V and 16A operation across -40°C to 125°C temperature ranges.

Q: What is the significance of the size designation difference (HB24 versus 24B)?

A: Size designations reflect manufacturer-specific nomenclature for their respective connector series. Both designations refer to 24-position inserts with equivalent electrical and mechanical specifications. The size designation is relevant only when selecting compatible housing connectors from the same manufacturer series.

Q: Can these inserts be used interchangeably in new designs?

A: Selection should be based on the connector housing series specified in the design. If the design calls for EPIC® HBE housings, use the LAPP 10196000. If the design calls for Han® E housings, use the HARTING 09330242601. Both provide equivalent electrical performance within their respective connector ecosystems.