CONN INSERT HBE10 MALE (10192000)

Part Overview

The LAPP 10192000 is an active male insert connector for heavy-duty applications, featuring 10 positions plus ground contact with screw termination. This component is part of the EPIC® HBE series and is designed for industrial control and power distribution systems requiring robust electrical connections. The part is in active production status with full RoHS3 and REACH compliance. Substitute parts may be required due to supply chain constraints, regional availability, or system integration requirements with alternative connector families.

Substiute Parts

10192000

LAPPIn Stock: 84110192000 Datasheet

Current PartRFQ

09330102601

HARTINGIn Stock: 88109330102601 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10192000 is determined by strict equivalence across the following critical parameters:

• Connector Type: Insert (male gender only)
• Position Configuration: 10+Ground positions
• Termination Method: Screw termination
• Electrical Ratings: 600V voltage and 16A current capacity
• Material Specifications: Polycarbonate housing, copper alloy contacts with silver finish
• Environmental Compliance: UL94 V-0 flammability rating, RoHS3 compliance, REACH unaffected status
• Operating Temperature: -40°C to 125°C range

The HARTING 09330102601 meets all substitution criteria as a functionally equivalent male insert with identical electrical ratings, material composition, and compliance certifications. Mechanical compatibility is maintained through equivalent position count and screw termination design.

Parameter Comparison

Engineering Selection Recommendations

The HARTING 09330102601 is a direct functional equivalent to the LAPP 10192000 based on complete parameter alignment across all critical specifications. Both components maintain active product status and full compliance with RoHS3 and REACH regulatory requirements. Selection between these parts should be based on availability, supply chain logistics, and system integration requirements rather than electrical or mechanical performance differences. Both components are suitable for applications requiring 600V/16A heavy-duty connector inserts with screw termination in industrial control environments.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09330102601 be used as a direct replacement for the LAPP 10192000?

A: Yes. Both components share identical electrical ratings (600V, 16A), position configuration (10+Ground), termination method (screw), material composition (polycarbonate housing, copper alloy silver-plated contacts), and environmental compliance certifications (UL94 V-0, RoHS3, REACH unaffected). Functional substitution is supported.

Q: Are there mechanical compatibility concerns between these two insert types?

A: No. Both inserts are designed for equivalent position counts and screw termination architecture. Mechanical compatibility is maintained across the specified parameter set.

Q: What is the significance of the 10+Ground position configuration?

A: The 10+Ground designation indicates 10 signal or power positions plus one dedicated ground contact. This configuration is standard for both the LAPP EPIC® HBE and HARTING Han® E series inserts, ensuring functional equivalence.

Q: Do both parts meet the same flammability and environmental standards?

A: Yes. Both components carry UL94 V-0 material flammability ratings, RoHS3 compliance, and REACH unaffected status. Environmental and regulatory requirements are identical.

Q: What is the operating temperature range for both components?

A: Both the LAPP 10192000 and HARTING 09330102601 operate across the -40°C to 125°C temperature range, supporting equivalent thermal performance in industrial applications.