Phoenix Contact 1014800 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 1014800 is a 2-position feed-through terminal block connector from the CLIPLINE MTKD series, designed for screw termination of conductors in the 12-24 AWG range. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new designs requiring compatible alternatives.

The 1014800 operates at 16 A (IEC) and 400V (IEC), with polyamide insulation rated UL94 V-0. Its discontinuation necessitates evaluation of active alternatives that maintain electrical and mechanical compatibility within the same product family.

Substiute Parts

1014800

Phoenix ContactIn Stock: 9961014800 Datasheet

Current PartRFQ

3100017

Phoenix ContactIn Stock: 8313100017 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 1014800 is determined by the following critical parameters:

• Series Compatibility: Both parts must belong to the CLIPLINE MTKD series to ensure mechanical and electrical interchangeability within the same connector family.
• Position and Level Configuration: The substitute must maintain 2 positions and 1 level to match the original footprint and circuit topology.
• Terminal Geometry: Terminal width of 5.2 mm must be preserved for proper mating and contact integrity.
• Termination Method: Screw termination is required for consistent installation procedures.
• Electrical Ratings: Current and voltage ratings must meet or exceed the original specifications (16 A IEC, 400 V IEC).
• Wire Gauge Compatibility: The substitute must accommodate the conductor range of the original part; expanded ranges are acceptable.
• Insulation and Flammability: Polyamide insulation with UL94 V-0 rating ensures compliance with safety standards.
• Stripping Length: 7 mm stripping length must be maintained for proper termination.

The Phoenix Contact 3100017 satisfies all substitution criteria while offering an expanded wire gauge range (12-28 AWG) and active product status.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3100017 is the qualified substitute for the obsolete 1014800 based on the following engineering criteria:

Electrical Equivalence: Both components maintain identical IEC electrical ratings (16 A, 400 V), ensuring no derating or circuit redesign is required.

Mechanical Compatibility: Identical terminal geometry (5.2 mm width), position count (2), and level configuration (1) guarantee direct replacement without PCB or mounting modifications.

Safety Compliance: Both parts feature polyamide insulation with UL94 V-0 flammability rating, meeting the same fire safety standards. The 3100017 carries ROHS3 compliance, representing current regulatory alignment.

Wire Gauge Advantage: The 3100017 expands the acceptable wire gauge range to 12-28 AWG, providing greater flexibility for conductor selection while maintaining the original 0.2-4 mm² cross-sectional range.

Product Lifecycle: The transition from obsolete (1014800) to active status (3100017) ensures long-term availability and supply chain stability for future procurement.

Frequently Asked Questions (FAQ)

Q: Can the 3100017 directly replace the 1014800 in existing assemblies?

A: Yes. The 3100017 maintains identical mechanical footprint, terminal geometry, and electrical ratings. No modifications to mounting, wiring, or circuit design are necessary.

Q: What is the significance of the expanded wire gauge range (12-28 AWG vs. 12-24 AWG)?

A: The 3100017 accepts a broader conductor range, accommodating 28 AWG conductors in addition to the original 12-24 AWG specification. This provides design flexibility without compromising compatibility with the original 12-24 AWG range.

Q: Are there differences in UL and IEC ratings between the two parts?

A: The 1014800 specifies only IEC ratings (16 A, 400 V). The 3100017 provides both IEC ratings (16 A, 400 V) and UL ratings (10 A, 300 V). For applications requiring UL compliance, the UL ratings of the 3100017 apply.

Q: What is the difference between RoHS and ROHS3 compliance?

A: Both designations indicate compliance with Restriction of Hazardous Substances regulations. ROHS3 represents the current regulatory standard, reflecting the 3100017's active product status and alignment with contemporary environmental requirements.

Q: Is the stripping length identical between both parts?

A: Yes. Both the 1014800 and 3100017 require 7 mm conductor stripping length, ensuring consistent termination procedures and installation practices.

Q: Can the 3100017 be used in new designs as a primary component selection?

A: Yes. The 3100017 is an active product with current manufacturing status, full compliance certifications, and established supply availability, making it suitable for new design implementations.