LAPP 101320C0 Heavy Duty Connector Base - Equivalent & Substitute Parts

Part Overview

The LAPP 101320C0 is a panel mount connector base for the EPIC® HB series, designed for bottom entry applications with IP65 ingress protection. This component provides dust-tight and water-resistant connectivity in industrial environments. The part is currently in Last Time Buy status, indicating discontinued production. Identifying equivalent substitute parts is necessary to ensure continued availability and system compatibility for new installations and maintenance applications.

Substiute Parts

101320C0

LAPPIn Stock: 930101320C0 Datasheet

Current PartRFQ

10132000

LAPPIn Stock: 77910132000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 101320C0 is determined by the following critical parameters:

• Connector Type & Series: Must be Base - Panel Mount connector from EPIC® series (HB or H-B variants)
• Size Designation: Must be HB32 to ensure mechanical and electrical compatibility with mating components
• Entry Style: Must be Bottom Entry configuration
• Ingress Protection: Must maintain IP65 rating for dust-tight and water-resistant performance
• Housing Material & Finish: Aluminum Alloy with Powder Coated finish for environmental durability
• Lock Mechanism: Locking Clip (2) on Base Bottom for secure installation

The LAPP 10132000 qualifies as a substitute based on matching all critical parameters within acceptable tolerances.

Parameter Comparison

Engineering Selection Recommendations

The LAPP 10132000 is an active production substitute for the discontinued 101320C0. Both parts maintain identical mechanical interfaces, electrical performance characteristics, and environmental protection ratings. The substitute part offers the advantage of continued availability through active manufacturing status.

The operating temperature range difference (-40°C to 100°C for the substitute versus -40°C to 125°C for the original) should be evaluated against specific application requirements. For applications operating consistently below 100°C, the substitute part provides full functional equivalence.

The dimensional variance of 0.5mm in length (124.00mm versus 124.50mm) is within standard manufacturing tolerances and does not affect panel mount compatibility or connector interface performance.

Frequently Asked Questions (FAQ)

Q: Can the LAPP 10132000 be used as a direct replacement for 101320C0 in existing installations?

A: Yes, the 10132000 provides direct mechanical and electrical compatibility. Both parts share identical HB32 size designation, bottom entry configuration, IP65 ingress protection, and locking mechanisms. Verify that your application operating temperature does not exceed 100°C.

Q: What is the significance of the series designation change from EPIC® HB to EPIC® H-B?

A: Both designations refer to the same EPIC® connector family. The H-B notation represents a variant within the same product line. The functional and mechanical specifications remain equivalent for HB32 panel mount base applications.

Q: Are there dimensional differences that affect panel cutout requirements?

A: The length difference of 0.5mm (124.50mm to 124.00mm) is negligible for panel mounting applications. Standard panel cutout dimensions accommodate both variants without modification.

Q: Does the operating temperature range difference affect suitability for my application?

A: The substitute part operates from -40°C to 100°C. If your application requires sustained operation above 100°C, the original 101320C0 specification of -40°C to 125°C is necessary. For standard industrial environments operating below 100°C, the substitute is fully suitable.

Q: What is the inventory status for these parts?

A: The original 101320C0 has 903 pieces in stock with Last Time Buy status. The substitute 10132000 has 736 pieces in active production inventory, ensuring long-term availability for future requirements.