LAPP 101270 Hood Connector Top Entry PG21 HB24 IP65 Equivalent & Substitute Parts

Part Overview

The LAPP 101270 is a heavy duty hood connector accessory designed for top entry applications with PG21 thread size and HB24 form factor. This component provides IP65 ingress protection (dust tight, water resistant) and operates across an extended temperature range of -40°C to 125°C. The part is classified as Last Time Buy, indicating discontinued production status. Identification of equivalent and substitute parts is necessary to ensure continued availability and system compatibility for maintenance and new installations.

Substiute Parts

101270

LAPPIn Stock: 926101270 Datasheet

Current PartRFQ

10127000

LAPPIn Stock: 111910127000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 101270 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Hood
• Style: Top Entry
• Size: HB24
• Thread Size: PG21
• Ingress Protection: IP65 (Dust Tight, Water Resistant)
• Housing Material: Aluminum Alloy
• Housing Finish: Powder Coated

Secondary Compatibility Factors:

• Operating Temperature Range compatibility
• Series compatibility within EPIC® product family
• Lock Location: Locking Clip (2) on Base Bottom

The substitute part LAPP 10127000 maintains all primary substitution criteria. Dimensional variations and product status differences are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

LAPP 10127000 as Primary Substitute:

The LAPP 10127000 is classified as an active product with confirmed current inventory availability (1046 pieces), making it the recommended substitute for the discontinued LAPP 101270. Both parts maintain identical functional specifications for connector type, entry style, size designation, thread size, and ingress protection rating.

Critical Consideration - Operating Temperature Range:

The substitute part LAPP 10127000 operates within -40°C to 100°C, compared to the main part's -40°C to 125°C range. Applications requiring sustained operation above 100°C require evaluation against specific system requirements before substitution.

Dimensional Difference:

The substitute part features a length of 4.724" (120.00mm) versus the main part's 3.673" (93.30mm). Width and height dimensions remain identical. Installation space and mounting clearance must be verified for applications with spatial constraints.

Product Status Advantage:

Selection of LAPP 10127000 provides access to an active product line with ongoing manufacturer support, eliminating supply chain risk associated with Last Time Buy status of the original part.

Frequently Asked Questions (FAQ)

Q: Can LAPP 10127000 directly replace LAPP 101270 in existing installations?

A: Direct replacement is functionally compatible for all primary connector specifications (type, style, size, thread, IP rating). Verify installation space accommodates the 1.051" (26.70mm) additional length and confirm operating temperature requirements do not exceed 100°C.

Q: What is the significance of the series designation change from EPIC® HB to EPIC® H-B?

A: Both designations reference the EPIC® product family with HB24 form factor. The series notation difference reflects manufacturer nomenclature updates. Functional compatibility remains unchanged.

Q: Are there inventory or lead time advantages to selecting the substitute part?

A: LAPP 10127000 maintains active product status with 1046 pieces in current inventory, compared to 833 pieces for the Last Time Buy LAPP 101270. Active status provides ongoing availability and standard lead times.

Q: How does the reduced maximum operating temperature of LAPP 10127000 affect system design?

A: Applications operating continuously above 100°C require the original LAPP 101270 specification or alternative components rated to 125°C. Applications with peak temperatures above 100°C but sustained operation below 100°C are compatible with LAPP 10127000.

Q: What packaging considerations apply to these parts?

A: LAPP 101270 is supplied in bulk packaging. LAPP 10127000 packaging specification is not provided in available documentation. Confirm packaging requirements with supplier for procurement planning.