LAPP 101239NP Hood Connector Side Entry NPT-1 HB24 IP65 Equivalent & Substitute Parts

Part Overview

The LAPP 101239NP is an active-status heavy duty connector hood designed for side entry applications with NPT-1 thread configuration. This component functions as a protective enclosure for EPIC® HB series connectors, providing IP65-rated ingress protection in industrial environments. The part is manufactured from aluminum alloy with powder-coated finish and operates across -40°C to 125°C temperature range.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specifications, enabling direct replacement in applications where connector hood functionality and environmental protection requirements remain constant.

Substiute Parts

101239NP

LAPPIn Stock: 1209101239NP Datasheet

Current PartRFQ

09305240541

HARTINGIn Stock: 129809305240541 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 101239NP is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Connector Type: Hood
• Style: Side Entry
• Thread Size: NPT-1
• Ingress Protection Rating: IP65 (Dust Tight, Water Resistant)
• Lock Location: Locking Clip (1) on Base Bottom
• Operating Temperature Range: -40°C ~ 125°C
• Housing Material: Aluminum (Alloy or Die Cast)
• Housing Finish: Powder Coated

The HARTING 09305240541 satisfies all critical parameters. Both parts function as protective hoods for side-entry connector applications with identical environmental protection ratings, thread specifications, and thermal operating ranges. Dimensional variations in height (61.00mm versus 76.00mm) do not affect substitution eligibility, as hood height is determined by the specific connector series being protected rather than the hood's functional capability.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 101239NP and HARTING 09305240541 maintain active product status with identical regulatory classifications (EAR99, HTSUS 8538.90.8180). The HARTING substitute carries ROHS3 compliance and REACH unaffected status, confirming environmental regulatory alignment.

Selection between these parts is determined by connector series compatibility. The LAPP 101239NP interfaces with EPIC® HB series connectors, while the HARTING 09305240541 interfaces with Han® B series connectors. The height differential (61.00mm versus 76.00mm) reflects the distinct connector envelope requirements of each manufacturer's series design.

Both parts provide equivalent functional performance for side-entry NPT-1 threaded hood applications with IP65 environmental protection across the specified -40°C to 125°C operating range.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09305240541 directly replace the LAPP 101239NP in existing installations?

A: Direct replacement depends on connector series compatibility. The LAPP 101239NP is designed for EPIC® HB series connectors, while the HARTING 09305240541 is designed for Han® B series connectors. Both hoods provide identical functional protection (IP65, NPT-1 side entry), but physical interface compatibility with the base connector must be verified before substitution.

Q: What is the significance of the height difference between these two hoods?

A: The height difference (61.00mm for LAPP versus 76.00mm for HARTING) reflects the distinct connector envelope designs of each manufacturer's series. This dimension is determined by the connector size and configuration being protected, not by the hood's protective capability. Height alone does not affect substitution eligibility.

Q: Are both parts suitable for the same environmental conditions?

A: Yes. Both the LAPP 101239NP and HARTING 09305240541 provide IP65 ingress protection (dust tight, water resistant) and operate across identical temperature ranges (-40°C to 125°C). Environmental protection performance is equivalent.

Q: What are the critical parameters for confirming substitution eligibility?

A: Substitution eligibility requires matching: connector type (hood), style (side entry), thread size (NPT-1), ingress protection rating (IP65), lock location (locking clip on base bottom), and operating temperature range (-40°C to 125°C). Both parts satisfy these criteria.

Q: Do regulatory certifications differ between these parts?

A: Both parts share identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications. The HARTING part additionally carries ROHS3 compliance and REACH unaffected status, providing enhanced regulatory documentation for specific applications.