LAPP 101230NP Hood Connector Side Entry NPT-1 HB24 Equivalent & Substitute Parts

Part Overview

The LAPP 101230NP is a Heavy Duty Hood Connector featuring side entry configuration with NPT-1 thread size, designed for the EPIC® HB series. This connector provides IP65 ingress protection (dust tight, water resistant) and operates across a temperature range of -40°C to 125°C. The part is currently in Active product status with 836 pieces available in inventory.

Identification of equivalent and substitute parts becomes necessary when the primary part reaches end-of-life status, experiences supply constraints, or when design flexibility permits component standardization across manufacturing platforms.

Substiute Parts

101230NP

LAPPIn Stock: 851101230NP Datasheet

Current PartRFQ

09305240521

HARTINGIn Stock: 110209305240521 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 101230NP is determined by alignment across the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Hood configuration required
• Style: Side Entry configuration required
• Thread Size: NPT-1 thread specification required
• Lock Mechanism: Locking Clip (2) on Base Bottom required
• Size Compatibility: 24-pin equivalent size class

Secondary Compatibility Factors:

• Ingress Protection: IP65 or equivalent environmental sealing
• Operating Temperature: -40°C to 125°C range or broader
• Housing Material: Aluminum Alloy or equivalent structural material
• Mechanical Dimensions: Length and width alignment within tolerance; height variation acceptable within mechanical envelope constraints

The HARTING 09305240521 (Han® B series, 24B size) satisfies the primary substitution criteria through identical connector type, side entry style, NPT-1 thread size, and dual locking clip base configuration.

Parameter Comparison

Engineering Selection Recommendations

LAPP 101230NP (Primary Selection): The LAPP 101230NP remains the preferred component for new designs and ongoing production. Active product status ensures continued availability and manufacturer support. All environmental and operational specifications are fully documented.

HARTING 09305240521 (Substitute Selection): The HARTING 09305240521 is qualified as a functional substitute based on matching connector type, side entry configuration, NPT-1 thread specification, and dual locking clip base design. The substitute carries ROHS3 compliance and REACH unaffected certification, meeting regulatory requirements.

Selection Constraints: The HARTING substitute exhibits a height dimension increase of 15mm (76.00mm versus 61.00mm). This dimensional variance requires mechanical envelope verification within the target application. The Last Time Buy status of the HARTING part indicates limited future availability; procurement planning should account for this constraint.

Unspecified parameters for the HARTING substitute (ingress protection rating, operating temperature range, housing material) require confirmation against application requirements prior to final component selection.

Frequently Asked Questions (FAQ)

Q: What makes the HARTING 09305240521 a valid substitute for the LAPP 101230NP?

A: Both connectors share identical functional specifications: Hood connector type, side entry configuration, NPT-1 thread size, and dual locking clip base mounting. Length and width dimensions are identical (120mm × 43mm). These parameters define the core substitution criteria for this connector category.

Q: Does the height difference between the two parts affect substitution?

A: The HARTING substitute is 15mm taller (76mm versus 61mm). This dimensional difference requires verification against the mechanical envelope of the target application. If the application permits this height variation, substitution is feasible. If space constraints are critical, the dimensional difference may preclude substitution.

Q: What is the significance of the "Last Time Buy" status for the HARTING part?

A: Last Time Buy status indicates that HARTING has announced end-of-production for the 09305240521. Future availability is limited to existing inventory. If this substitute is selected, procurement should secure required quantities before inventory depletion.

Q: Are the environmental specifications equivalent between the two parts?

A: The LAPP 101230NP specifies IP65 ingress protection and -40°C to 125°C operating temperature. The HARTING 09305240521 does not provide these specifications in the available documentation. Confirmation of equivalent environmental performance is required before final substitution approval.

Q: What compliance certifications apply to the substitute part?

A: The HARTING 09305240521 carries ROHS3 compliance certification and REACH unaffected status. Both parts share identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications.

Q: Can these parts be used interchangeably in existing assemblies?

A: Interchangeability depends on mechanical envelope constraints. Identical length and width dimensions support direct substitution in most mounting configurations. The 15mm height increase requires verification that the application design accommodates this variation without interference or performance degradation.