Equivalent & Substitute Parts for 10090767-P094LLF

Part Overview

The 10090767-P094LLF is a 9-position D-Sub plug connector manufactured by Amphenol ICC (FCI) with right-angle solder termination and board-edge mounting. This connector is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing system support and component procurement. The part features a DE shell size (1 position layout), male pin configuration, and is rated for 5A per contact at 250V with operating temperatures from -55°C to 105°C.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	9
Shell Size, Connector Layout	1 (DE, E)
Mounting Type	Board Edge, Through Hole, Right Angle
Termination	Solder
Current Rating	5A per Contact
Voltage Rating	250V
Operating Temperature	-55°C to 105°C
Shell Material, Finish	Steel, Tin-Nickel Plated
Contact Finish	Gold (Flash)
Backset Spacing	0.409" (10.40mm)
Material Flammability Rating	UL94 V-0

Substitute Part Grouping Explanation

Substitution of the 10090767-P094LLF is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

Connector style (D-Sub), type (Plug, Male Pins), and position count (9 positions)
Shell size and layout (DE, E - Size 1)
Mounting configuration (Through Hole, Right Angle)
Termination method (Solder)
Backset spacing (0.409" / 10.40mm)
Flammability rating (UL94 V-0)

Secondary Compatibility Parameters:

Current rating must equal or exceed 5A per contact
Voltage rating must equal or exceed 250V
Operating temperature range must encompass -55°C to 105°C
Contact material and finish must support signal transmission

Parts Excluded from Direct Substitution:

09652666815 and 09652666816: 15-position connectors (incompatible position count)
Parts with different shell sizes or mounting types

Direct Substitutes (9-Position, DE Shell, Right Angle, Solder):

D09P13A4GL00LF (Amphenol ICC, Delta D series, Active status)
09651626817 (HARTING, Active status)
09651627817 (HARTING, Active status)
09651666817 (HARTING, Active status)
09661626817 (HARTING, Active status)
09661627817 (HARTING, Active status)
FCE17E09PB210 (Amphenol ICC Commercial Products, Active status)
FCE17E09PB28B (Amphenol ICC Commercial Products, Active status)

Parameter Comparison

Parameter	10090767-P094LLF	D09P13A4GL00LF	09651626817	09651627817	09651666817	09661626817	09661627817	FCE17E09PB210	FCE17E09PB28B
Manufacturer	Amphenol ICC (FCI)	Amphenol ICC (FCI)	HARTING	HARTING	HARTING	HARTING	HARTING	Amphenol ICC (Commercial)	Amphenol ICC (Commercial)
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	9	9	9	9	9	9	9	9	9
Shell Size, Layout	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)	1 (DE, E)
Mounting Type	Board Edge, Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A per Contact	5A per Contact	6.5A	6.5A	6.5A	7.5A	7.5A	5A	5A
Voltage Rating	250V	300V	—	—	—	—	—	—	—
Operating Temperature	-55°C to 105°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-55°C to 125°C	-40°C to 85°C	-40°C to 85°C
Shell Material, Finish	Steel, Tin-Nickel Plated	Steel, Tin-Nickel Plated	Steel	Steel	Steel	Steel	Steel	Steel, Tin Plated	Steel, Tin Plated
Contact Finish	Gold (Flash)	Gold (Flash)	—	—	Gold	—	—	Gold (15.0µin)	Gold (15.0µin)
Backset Spacing	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	—	—	0.405" (10.29mm)	0.405" (10.29mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	—	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	RoHS Compliant

Engineering Selection Recommendations

Primary Recommendation: D09P13A4GL00LF

This Amphenol ICC Delta D series connector is the closest functional equivalent. It maintains identical position count, shell size, mounting configuration, and backset spacing. The part is in active production status with RoHS compliance certification. Operating temperature range extends to 125°C, exceeding the original specification. Voltage rating of 300V provides additional margin over the 250V requirement. Current rating matches at 5A per contact. Packaging is available in Tray format with 1352 units in stock.

Secondary Recommendations: HARTING 09651626817, 09651627817, 09651666817

These HARTING connectors provide functionally equivalent substitution with enhanced current ratings (6.5A) and extended operating temperature range (-55°C to 125°C). All three parts carry ROHS3 compliance and are in active production. Flange features differ (Mating Side Female Screwlock vs. Board Side), which may require mechanical design review. Contact material is copper alloy with varying finish specifications. Bulk packaging with inventory exceeding 750 units per part number.

Alternative Recommendations: HARTING 09661626817, 09661627817

These HARTING connectors feature machined contact form and highest current rating (7.5A per contact). Operating temperature range and RoHS3 compliance align with secondary recommendations. Backset spacing specification is not provided in documentation. Suitable for applications requiring maximum current capacity within the 9-position DE shell configuration.

Amphenol ICC Commercial Products: FCE17E09PB210, FCE17E09PB28B

These FCE17 series connectors provide substitution with identical 5A current rating and gold contact finish. Operating temperature range is restricted to -40°C to 85°C, which does not encompass the full -55°C to 105°C specification of the original part. Backset spacing is 0.405" (10.29mm), representing a 0.004" deviation from the original 0.409" specification. These parts are suitable only for applications operating within the narrower temperature range. RoHS compliance is confirmed. Inventory exceeds 900 units.

Compliance and Certification Summary:

All substitute parts maintain UL94 V-0 flammability rating. HARTING parts carry ROHS3 certification; Amphenol ICC parts carry RoHS certification. All parts are classified under ECCN EAR99 and HTSUS 8536.69.4040. REACH compliance status is confirmed for HARTING parts; REACH status is unaffected for Amphenol ICC parts.

Frequently Asked Questions (FAQ)

Q: Can FCE17E09PB210 or FCE17E09PB28B be used as direct replacements for 10090767-P094LLF?

A: These parts are functionally compatible for signal transmission in 9-position D-Sub applications. However, the operating temperature range (-40°C to 85°C) does not encompass the full specification of the original part (-55°C to 105°C). Backset spacing differs by 0.004 inches. Use only in applications confirmed to operate within the narrower temperature window.

Q: What is the significance of backset spacing differences between 0.409" and 0.405"?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. A 0.004-inch variance may affect mating alignment with corresponding receptacle connectors. Mechanical design review is required to confirm compatibility with existing mating hardware before substitution.

Q: Are HARTING connectors with unspecified voltage ratings suitable replacements?

A: HARTING parts 09651626817, 09651627817, 09651666817, 09661626817, and 09661627817 do not provide voltage rating specifications in available documentation. These parts are suitable for signal-level applications where voltage rating is not a critical design parameter. For applications requiring confirmed voltage ratings, use D09P13A4GL00LF (300V) or FCE17E09PB210/FCE17E09PB28B.

Q: What is the difference between stamped and machined contact forms?

A: Contact form refers to the manufacturing process. Stamped contacts (HARTING 09651626817, 09651627817, 09651666817) are produced through stamping operations and are cost-effective for high-volume applications. Machined contacts (HARTING 09661626817, 09661627817) are individually machined and provide tighter tolerances and enhanced durability. Both forms meet UL94 V-0 flammability requirements.

Q: Can I substitute a 15-position connector (09652666815 or 09652666816) for the 9-position original part?

A: No. These parts feature different shell sizes (Size 2, DA layout) and position counts (15 positions). They are not mechanically or electrically compatible with 9-position DE shell receptacles. Substitution would require complete redesign of the mating connector interface.

Q: Which substitute part offers the best long-term availability?

A: D09P13A4GL00LF (Amphenol ICC Delta D series) is recommended for long-term procurement. This part is in active production status with RoHS compliance and represents a major manufacturer's current product line. HARTING parts are also in active production with ROHS3 compliance. FCE17 series parts are active but feature restricted operating temperature range.

Q: Are there packaging differences between substitute parts?

A: Yes. D09P13A4GL00LF is supplied in Tray packaging. HARTING parts are supplied in Bulk packaging. FCE17 series parts do not specify packaging format. Packaging selection may affect procurement lead times and handling requirements. Confirm packaging compatibility with receiving and assembly processes.

Q: What compliance certifications are critical for my application?

A: All substitute parts maintain UL94 V-0 flammability certification. For RoHS-regulated applications, HARTING parts carry ROHS3 certification and Amphenol ICC parts carry RoHS certification. REACH compliance is confirmed for all parts. ECCN classification is EAR99 for all parts, indicating standard commercial export status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message