LAPP 10046000 Equivalent & Substitute Parts

Part Overview

The LAPP 10046000 is an EPIC® H-B series heavy duty connector hood designed for top entry applications with PG16 thread size. This accessory component provides IP65 ingress protection (dust tight, water resistant) and operates across an extended temperature range of -40°C to 100°C. The part is currently active in production with 835 units in stock. Alternative equivalent parts may be required due to application-specific entry configuration needs, inventory constraints, or design revision requirements.

Substiute Parts

10046000

LAPPIn Stock: 90710046000 Datasheet

Current PartRFQ

09300101731

HARTINGIn Stock: 75509300101731 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10046000 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Thread size: PG16 (mandatory match)
• Ingress protection rating: IP65 minimum
• Housing material: Aluminum or equivalent die-cast aluminum
• Operating temperature range: Must encompass -40°C minimum and 100°C maximum
• Connector type: Hood configuration
• Product status: Active production status

The HARTING 09300101731 qualifies as an equivalent substitute based on matching thread size (PG16), identical ingress protection rating (IP65), compatible aluminum housing material, and active product status. Both parts are powder-coated aluminum constructions designed for industrial heavy duty connector applications. The primary functional difference is entry configuration: the LAPP 10046000 features top entry design while the HARTING 09300101731 provides bottom entry coupling configuration. This distinction allows substitution in applications where cable routing and connector orientation can accommodate the alternative entry style.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 10046000 and HARTING 09300101731 maintain active production status and meet the core electrical and mechanical requirements for heavy duty connector hood applications with PG16 threading and IP65 environmental protection. The HARTING 09300101731 provides extended operating temperature capability to 125°C and carries explicit ROHS3 compliance certification, which may be advantageous for applications subject to regulatory compliance requirements. Selection between these parts should be based on specific application requirements regarding connector entry orientation (top versus bottom entry) and whether the extended temperature range or documented RoHS compliance of the HARTING part provides value for the intended installation.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09300101731 directly replace the LAPP 10046000 in all applications?

A: Direct replacement is possible only in applications where bottom entry connector orientation is functionally equivalent to top entry configuration. The PG16 thread size, IP65 protection rating, and aluminum housing construction are identical, but cable routing and mechanical mounting geometry may differ due to entry style variation.

Q: What is the significance of the different size designations (HB10 versus 10B)?

A: HB10 and 10B are manufacturer-specific size designations within their respective product families (EPIC® H-B and Han® B series). Both designations refer to compatible connector sizes with matching PG16 thread specifications and equivalent functional performance.

Q: Does the HARTING part's extended temperature range (-40°C to 125°C) provide additional capability?

A: The HARTING 09300101731 supports operation to 125°C compared to the LAPP part's 100°C maximum. This extended range may be relevant for applications with elevated ambient or operational temperatures, but does not affect compatibility at the LAPP part's specified operating envelope.

Q: Are there compliance or certification differences between these parts?

A: The HARTING 09300101731 carries documented ROHS3 compliance, REACH unaffected status, and specified ECCN and HTSUS classifications. The LAPP 10046000 specifications do not include these certifications in the provided data. Applications requiring documented regulatory compliance should reference the HARTING part's certification documentation.

Q: What packaging considerations apply to these substitute parts?

A: The LAPP 10046000 is supplied in standard packaging, while the HARTING 09300101731 is supplied in bulk packaging. Procurement quantities and handling procedures may differ accordingly.