LAPP 100460 Hood Connector Top Entry PG16 HB10 IP65 Equivalent & Substitute Parts

Part Overview

The LAPP 100460 is a heavy duty hood connector accessory designed for top entry applications with PG16 thread size in the EPIC® HB series. This connector provides IP65 ingress protection, making it suitable for dust-tight and water-resistant installations in industrial environments. The part is classified as Last Time Buy, indicating discontinued production status. Identifying equivalent and substitute parts is essential for procurement continuity and long-term system maintenance.

Substiute Parts

100460

LAPPIn Stock: 1153100460 Datasheet

Current PartRFQ

10046000

LAPPIn Stock: 90710046000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 100460 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Hood
• Style: Top Entry
• Size: HB10
• Thread Size: PG16
• Ingress Protection Rating: IP65
• Housing Material: Aluminum Alloy
• Housing Finish: Powder Coated
• Lock Location: Locking Clip (2) on Base Bottom

Secondary Compatibility Factors:

• Physical dimensions (2.874" L x 1.693" W x 2.157" H)
• Series compatibility within EPIC® family
• Operating temperature range overlap

The substitute part LAPP 10046000 maintains all primary substitution criteria and physical dimensions. Variation in operating temperature range and product status does not affect mechanical or electrical compatibility for standard industrial applications.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement:

LAPP 10046000 is the primary substitute for LAPP 100460. Both parts share identical mechanical specifications, connector geometry, and ingress protection ratings. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

Temperature Range Consideration:

The substitute part operates within -40°C to 100°C, compared to the original part's -40°C to 125°C range. Applications requiring sustained operation above 100°C must evaluate thermal requirements against the substitute's specifications.

Series Designation:

The original part is designated EPIC® HB series, while the substitute is EPIC® H-B series. Both designations represent compatible variants within the LAPP EPIC® connector family with identical form factor and functional characteristics.

Procurement Status:

The original part 100460 carries Last Time Buy status, indicating no future production. The substitute part 10046000 is Active status, providing assured availability for new installations and replacement stock.

Frequently Asked Questions (FAQ)

Q: Can LAPP 10046000 be used as a direct replacement for LAPP 100460 in existing installations?

A: Yes. Both parts maintain identical connector type, size, thread specification, and ingress protection rating. Physical dimensions and mounting configurations are identical. The substitute is mechanically and functionally compatible for direct installation.

Q: What is the difference between EPIC® HB and EPIC® H-B series designations?

A: Both designations represent compatible variants within the LAPP EPIC® connector family. The parts share identical mechanical specifications, electrical characteristics, and form factors. The series designation variation does not affect interchangeability.

Q: Are there temperature limitations when substituting LAPP 10046000 for LAPP 100460?

A: The substitute part operates within -40°C to 100°C. If the application requires sustained operation above 100°C, the substitute's temperature range must be evaluated against system requirements. For applications within -40°C to 100°C, no thermal limitations apply.

Q: What is the significance of Last Time Buy status for part 100460?

A: Last Time Buy indicates the original part is discontinued and no longer in production. LAPP 10046000 is the active production equivalent, ensuring continued availability for procurement and maintenance requirements.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both LAPP 100460 and LAPP 10046000 share identical dimensions of 2.874" L x 1.693" W x 2.157" H (73.00mm x 43.00mm x 54.80mm). No mechanical modifications are required for installation.

Q: Does the substitute part maintain the same locking mechanism?

A: Yes. Both parts feature identical locking clip configuration with two clips located on the base bottom. Mounting and securing procedures remain unchanged.

Q: What ingress protection rating does the substitute part provide?

A: LAPP 10046000 provides IP65 ingress protection, identical to the original part. This rating ensures dust-tight and water-resistant performance in industrial environments.