LAPP 10035000 Equivalent & Substitute Parts

Part Overview

The LAPP 10035000 is an EPIC® H-B series heavy duty connector base designed for box mount applications with side entry configuration. This component operates as an accessory base for industrial connector systems, featuring PG16 thread size and IP65 ingress protection rating suitable for dust-tight and water-resistant environments. The part maintains active product status with 705 units in current inventory. Alternative equivalent parts may be required due to supply chain considerations, design specification updates, or system integration requirements with different connector series architectures.

Substiute Parts

10035000

LAPPIn Stock: 77010035000 Datasheet

Current PartRFQ

09300101271

HARTINGIn Stock: 119109300101271 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 10035000 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Connector Type: Base - Box Mount (mandatory match)
• Style: Side Entry (mandatory match)
• Thread Size: PG16 (mandatory match)
• Ingress Protection: IP65 minimum (mandatory match)
• Lock Location: Locking Clip (2) on Base Bottom (mandatory match)

Secondary Compatibility Parameters:

• Housing Material: Aluminum construction (Die Cast or Alloy acceptable)
• Housing Finish: Powder Coated (mandatory match)
• Operating Temperature Range: Must encompass -40°C minimum and 100°C maximum

The HARTING 09300101271 satisfies all primary and secondary substitution criteria, with connector size designation difference (HB10 versus 10B) representing equivalent form factors within respective manufacturer series architectures.

Parameter Comparison

Engineering Selection Recommendations

Both the LAPP 10035000 and HARTING 09300101271 maintain active product status, confirming ongoing manufacturer support and availability. The HARTING 09300101271 provides extended operating temperature capability to 125°C, exceeding the LAPP specification of 100°C maximum. The HARTING component carries ROHS3 compliance and REACH unaffected status, with MSL rating of 1 (Unlimited), indicating superior moisture handling characteristics for long-term storage and deployment in variable humidity environments.

Dimensional variance of 3.2mm in height (57.00mm versus 53.80mm) must be evaluated within specific mounting cavity constraints. Both components feature identical length and width dimensions with matching thread size, locking mechanism, and ingress protection ratings, supporting direct functional substitution in standard applications.

Frequently Asked Questions (FAQ)

Q: Can the HARTING 09300101271 directly replace the LAPP 10035000 in existing installations?

A: Direct replacement is supported when mounting cavity height accommodates the 53.80mm dimension of the HARTING component. Both parts share identical connector type, side entry style, PG16 thread size, and IP65 ingress protection. Verify mechanical clearance before installation.

Q: What is the significance of the size designation difference (HB10 versus 10B)?

A: HB10 and 10B represent equivalent form factors within the LAPP EPIC® H-B and HARTING Han® B series respectively. These designations are manufacturer-specific nomenclature for the same functional connector size class and do not indicate incompatibility.

Q: Does the HARTING component require different mounting hardware?

A: Both components feature identical locking clip configuration (2 clips on base bottom) and PG16 thread size. Existing mounting hardware and installation procedures remain compatible.

Q: What is the inventory status for these parts?

A: LAPP 10035000 maintains 705 units in stock. HARTING 09300101271 maintains 1093 units in stock, providing enhanced availability for supply chain planning.

Q: Are there compliance or certification differences between these parts?

A: The HARTING 09300101271 carries explicit ROHS3 compliance and REACH unaffected certification. Both components maintain IP65 ingress protection and powder-coated aluminum construction suitable for industrial applications.