LAPP 100350 Heavy Duty Connector Base - Equivalent & Substitute Parts

Part Overview

The LAPP 100350 is a Heavy Duty Connector Base designed for box mount applications with side entry configuration, dual PG16 threading, and HB10 size classification. This component provides IP65 ingress protection (dust tight, water resistant) suitable for industrial environments with operating temperature range of -40°C to 125°C.

The 100350 carries Last Time Buy product status, indicating discontinued production. Identification of equivalent substitute parts is necessary to ensure continued availability and system compatibility for new installations and maintenance applications.

Substiute Parts

100350

LAPPIn Stock: 1035100350 Datasheet

Current PartRFQ

10035000

LAPPIn Stock: 77010035000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 100350 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Base - Box Mount
• Size Classification: HB10
• Thread Size: PG16
• Ingress Protection Rating: IP65 - Dust Tight, Water Resistant
• Housing Material: Aluminum Alloy
• Physical Dimensions: 94.00mm L × 52.00mm W × 2.244" H
• Locking Mechanism: Locking Clip (2) on Base Bottom

The substitute part LAPP 10035000 satisfies all mandatory parameters. The primary difference is configuration style: the 100350 features dual side entry, while the 10035000 features single side entry. This distinction affects connector capacity but maintains mechanical and environmental compatibility within the EPIC® series platform.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: LAPP 10035000

The LAPP 10035000 is the manufacturer-recommended substitute for the 100350. Both components share identical mechanical mounting interfaces, environmental protection ratings, and thermal operating characteristics within specified ranges. The 10035000 maintains Active product status, ensuring continued availability and supply chain reliability.

Temperature Consideration: The 10035000 operates to 100°C maximum, compared to 125°C for the 100350. Applications requiring sustained operation above 100°C require evaluation against actual thermal requirements.

Configuration Difference: The transition from dual side entry (100350) to single side entry (10035000) reduces connector capacity by one position. System designs must accommodate this reduced connector count or utilize multiple base units.

Compliance Status: Both components carry ECCN EAR99 classification, maintaining equivalent export control compliance.

Frequently Asked Questions (FAQ)

Q: Can LAPP 10035000 directly replace LAPP 100350 in existing installations?

A: Mechanical and environmental compatibility is confirmed. Functional replacement depends on connector capacity requirements. The 10035000 single side entry configuration accommodates one fewer connector than the dual configuration of the 100350. Verify system design does not require dual connector capacity.

Q: What is the temperature operating difference between these parts?

A: The 100350 operates from -40°C to 125°C. The 10035000 operates from -40°C to 100°C. Both maintain identical performance within their respective ranges. Applications operating between 100°C and 125°C require the 100350 or alternative parts rated to 125°C.

Q: Are the physical mounting dimensions identical?

A: Yes. Both parts measure 94.00mm length × 52.00mm width × 57.00mm height. Mounting hole patterns and locking clip positions are equivalent, enabling direct mechanical substitution.

Q: Why is the 100350 marked Last Time Buy?

A: Last Time Buy status indicates LAPP has discontinued production of this model. The 10035000 represents the current production equivalent within the EPIC® connector series.

Q: Do both parts maintain IP65 ingress protection?

A: Yes. Both the 100350 and 10035000 provide IP65 rating (dust tight, water resistant) with identical aluminum alloy housing and powder coat finish.

Q: What is the difference between EPIC® HB and EPIC® H-B series designations?

A: Both designations reference the same EPIC® connector platform. The series naming reflects internal LAPP classification; functional and mechanical compatibility is maintained across both designations.