Weidmüller 1001100000 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Weidmüller 1001100000 is a 4-position terminal block plug with female sockets, 0.200" (5.08mm) pitch, designed for 180° free-hanging in-line applications. This component is part of the Omnimate BL series and maintains Active product status. Alternative models may be required due to inventory constraints, application-specific feature requirements, or supply chain considerations.

Substiute Parts

1001100000

WeidmüllerIn Stock: 7701001100000 Datasheet

Current PartRFQ

1000960000

WeidmüllerIn Stock: 10221000960000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 1001100000 is determined by strict equivalence across the following critical parameters:

• Electrical Performance: Current rating (IEC: 20.8A, UL: 10A) and voltage rating (IEC: 400V, UL: 300V) must match exactly
• Physical Configuration: 4-position count, 0.200" (5.08mm) pitch, and 180° plug wire entry orientation must be identical
• Termination Method: Screwless push-in spring termination with leg spring contact system
• Mechanical Compatibility: Free-hanging in-line mounting type and female socket configuration
• Environmental Compliance: RoHS compliance and UL94 V-0 flammability rating must be maintained
• Wire Compatibility: Support for 12-26 AWG (0.2-2.5mm²) wire gauge range

The substitute part 1000960000 meets all these criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 1001100000 and 1000960000 are Active products from Weidmüller's Omnimate BL series with identical electrical, mechanical, and environmental specifications. Both maintain RoHS compliance and UL94 V-0 flammability certification.

The primary distinction between these parts is the feature set: the 1001100000 includes ejector latches, while the 1000960000 includes a mating flange. Selection between these equivalents depends on the specific mechanical interface requirements of the application. Both parts support identical wire gauges (12-26 AWG), current ratings (20.8A IEC / 10A UL), and voltage ratings (400V IEC / 300V UL).

Frequently Asked Questions (FAQ)

Q: Can 1000960000 be used as a direct replacement for 1001100000?

A: Both parts are electrically and mechanially equivalent across all critical parameters: 4-position configuration, 0.200" (5.08mm) pitch, 180° wire entry, identical current and voltage ratings, and matching wire gauge compatibility. The difference lies in mechanical features: ejector latches versus mating flange. Selection depends on the specific mounting and interface requirements of your application.

Q: Are the electrical ratings identical between these parts?

A: Yes. Both parts carry identical IEC ratings (20.8A at 400V) and UL ratings (10A at 300V). Wire gauge compatibility is also identical: 12-26 AWG (0.2-2.5mm²).

Q: Do both parts meet the same compliance standards?

A: Yes. Both 1001100000 and 1000960000 are RoHS compliant, carry UL94 V-0 flammability ratings, and maintain REACH Unaffected status. Both operate across the same temperature range (-50°C to 100°C).

Q: What is the difference in features between these two parts?

A: The 1001100000 features ejector latches and retention latches on the non-wire side. The 1000960000 features a mating flange and retention latches on the non-wire side. Both provide retention functionality; the choice depends on your mechanical assembly requirements.

Q: Are packaging and inventory considerations relevant to substitution?

A: Both parts are supplied in box packaging. Current inventory shows 692 pieces for 1001100000 and 958 pieces for 1000960000. Substitution eligibility is based on electrical and mechanical equivalence, not inventory levels.