LAPP 100090 Heavy Duty Connector Base - Equivalent & Substitute Parts

Part Overview

The LAPP 100090 is a Heavy Duty Connector Base designed for box mount applications with side entry configuration, dual PG16 threading, and HB6 size classification. This component provides IP65 ingress protection (dust tight, water resistant) suitable for industrial environments with operating temperature range of -40°C to 125°C.

The 100090 carries Last Time Buy product status, indicating discontinued or end-of-life classification. Identification of equivalent substitute parts is necessary to ensure continued availability and supply chain continuity for applications currently utilizing this connector base.

Substiute Parts

100090

LAPPIn Stock: 1217100090 Datasheet

Current PartRFQ

10009000

LAPPIn Stock: 77110009000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 100090 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Base - Box Mount
• Size Classification: HB6
• Thread Size: PG16
• Ingress Protection Rating: IP65 (Dust Tight, Water Resistant)
• Housing Material: Aluminum Alloy
• Housing Finish: Powder Coated
• Physical Dimensions: 84.00mm L × 52.00mm W × 57.00mm H
• Lock Location: Locking Clip (1) on Base Bottom
• Housing Color: Gray

Allowable Variation Parameters:

• Style: Side Entry configuration (single or dual entry acceptable within mechanical compatibility)
• Operating Temperature Range: Minimum -40°C required; maximum temperature may vary
• Series: EPIC® family variants acceptable
• Product Status: Active status preferred for ongoing availability

The substitute part LAPP 10009000 satisfies all mandatory matching parameters and represents an active product alternative within the EPIC® connector family.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: LAPP 10009000

The LAPP 10009000 is the manufacturer-recommended substitute for the discontinued LAPP 100090. This substitution is supported by:

1. Mechanical Compatibility: Identical physical dimensions (84.00mm × 52.00mm × 57.00mm) and mounting interface ensure direct mechanical replacement without enclosure or assembly modifications.

2. Electrical and Environmental Specifications: Both parts maintain identical IP65 ingress protection rating, PG16 thread size, HB6 size classification, and aluminum alloy housing with powder coat finish. These parameters ensure equivalent environmental sealing and durability in industrial applications.

3. Product Status Alignment: The 10009000 carries Active product status, providing assured long-term availability and supply chain stability compared to the Last Time Buy status of the 100090.

4. Temperature Consideration: The 10009000 operates within -40°C to 100°C range. Applications requiring sustained operation above 100°C must be evaluated against actual thermal requirements before substitution.

5. Configuration Difference: The 100090 features dual side entry configuration while the 10009000 features single side entry. Both maintain identical mechanical footprint and mounting interface. Application-specific entry requirements must be confirmed.

Frequently Asked Questions (FAQ)

Q: Can LAPP 10009000 directly replace LAPP 100090 in existing installations?

A: Yes, the 10009000 provides direct mechanical and electrical replacement. Identical physical dimensions, mounting interface, thread size (PG16), and ingress protection rating (IP65) ensure compatibility. The substitute maintains the same locking clip configuration on the base bottom.

Q: What is the difference between dual side entry (100090) and single side entry (10009000)?

A: The 100090 accommodates two PG16 connectors on the side entry face, while the 10009000 accommodates one PG16 connector. Physical dimensions remain identical. Application requirements determine which configuration is appropriate.

Q: Does the lower maximum operating temperature of 10009000 (100°C vs. 125°C) affect substitution?

A: The 10009000 operates to 100°C maximum. Applications with sustained operating temperatures between 100°C and 125°C require thermal analysis to confirm the substitute is suitable. Most industrial applications operate within the 10009000 temperature range.

Q: Are both parts within the same EPIC® connector family?

A: Yes. The 100090 belongs to EPIC® HB series and the 10009000 belongs to EPIC® H-B series. Both are LAPP EPIC® family products with compatible mechanical and electrical interfaces.

Q: What is the inventory status for the substitute part?

A: LAPP 10009000 has 736 pieces in new original stock. The 100090 (Last Time Buy) has 1145 pieces remaining. Transition to the active substitute is recommended for new designs and replenishment orders.

Q: Are certifications and compliance ratings identical?

A: Both parts share identical ECCN (EAR99) and HTSUS (8538.90.8180) classifications, confirming equivalent regulatory and export compliance status.