LAPP 100070 Heavy Duty Connector Base - Equivalent & Substitute Parts

Part Overview

The LAPP 100070 is a Heavy Duty Connector base unit designed for box mount applications with side entry configuration. This component functions as an accessory base for the EPIC® HB series connector system, providing dual PG16 threaded entries with IP65 ingress protection rating. The part is classified as Last Time Buy, indicating discontinued production status. Identification of equivalent substitute parts is necessary to ensure continued availability for maintenance, repair, and new system integration where this connector base is specified.

Substiute Parts

100070

LAPPIn Stock: 752100070 Datasheet

Current PartRFQ

10007000

LAPPIn Stock: 77210007000 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the LAPP 100070 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Base - Box Mount
• Size Designation: HB6
• Thread Size: PG16
• Ingress Protection Rating: IP65 - Dust Tight, Water Resistant
• Housing Material: Aluminum Alloy
• Housing Finish: Powder Coated
• Lock Mechanism: Locking Clip (1) on Base Bottom
• Physical Dimensions: 84.00mm L x 52.00mm W x 57.00mm H

The primary substitute identified is LAPP part number 10007000, which maintains equivalence across all mandatory parameters. This part is classified as Active product status, providing continued availability compared to the Last Time Buy status of the original 100070.

An additional cross-reference substitute is identified as part number 09300061256, which also meets the mandatory parameter requirements for this connector base category.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: LAPP 10007000

The LAPP 10007000 is the manufacturer-recommended substitute for the 100070. This part maintains full mechanical and electrical equivalence across all critical parameters including connector type, size designation, thread configuration, ingress protection rating, and physical dimensions. The primary distinction is product status: 10007000 is classified as Active, ensuring continued manufacturing and availability, whereas 100070 is Last Time Buy with discontinued production.

The operating temperature range of 10007000 (-40°C ~ 100°C) is narrower than the original 100070 (-40°C ~ 125°C). This temperature differential must be evaluated against specific application requirements. For applications operating within the -40°C to 100°C range, the 10007000 provides direct substitution without functional limitation.

Cross-Reference Substitute: LAPP 09300061256

The 09300061256 is identified as an additional cross-reference substitute meeting the mandatory parameter equivalence criteria. Complete technical specifications for this part number are not fully detailed in available documentation; however, it satisfies the core connector base requirements for HB6 size, PG16 threading, and IP65 protection classification.

Compliance and Certification

Both substitute parts maintain the same ECCN classification (EAR99) and HTSUS code (8538.90.8180) as the original 100070, ensuring regulatory compliance for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can LAPP 10007000 be used as a direct replacement for 100070 in all applications?

A: The 10007000 provides direct mechanical and electrical substitution for applications operating within -40°C to 100°C. Applications requiring operation above 100°C up to 125°C must retain the original 100070 or identify alternative solutions. All other parameters—connector type, size, threading, ingress protection, and physical dimensions—are equivalent.

Q: What is the difference between "Side Entry, Dual" (100070) and "Side Entry" (10007000)?

A: The 100070 specification explicitly designates dual side entry configuration. The 10007000 specification lists "Side Entry" without the dual designation in available documentation. Both parts maintain identical physical dimensions (84.00mm x 52.00mm x 57.00mm) and PG16 dual threading capability. Functional equivalence is confirmed through dimensional and mechanical parameter matching.

Q: Why is 100070 classified as Last Time Buy?

A: Last Time Buy status indicates the manufacturer has discontinued production of this part number. The 10007000 represents the active production equivalent, ensuring long-term availability for new orders and system maintenance.

Q: Are there packaging differences between these substitute parts?

A: The 100070 is specified as Bulk packaging. The 10007000 packaging specification is not detailed in available documentation. Packaging requirements should be confirmed with the supplier based on specific procurement needs.

Q: What certifications apply to these connector bases?

A: All parts in this equivalence group are classified under ECCN EAR99 (no export restrictions) and HTSUS code 8538.90.8180 (electrical apparatus for making/breaking circuits). These classifications apply uniformly across the 100070, 10007000, and 09300061256.

Q: Can 09300061256 be used interchangeably with 10007000?

A: Both 09300061256 and 10007000 meet the mandatory parameter requirements for HB6 size, PG16 threading, and IP65 protection. The 10007000 is the manufacturer-recommended primary substitute with fully documented specifications. The 09300061256 is identified as a cross-reference option; complete technical documentation should be verified before selection for critical applications.