3M 100-016-001 DIP Socket 16-Position Equivalent & Substitute Parts

Part Overview

The 3M 100-016-001 is a 16-position DIP socket designed for IC and transistor applications with gold-plated contacts and through-hole mounting. This component is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing system support and new design implementations. The socket accommodates standard 16-pin DIP packages with 0.3" row spacing and 0.100" pitch contacts.

Substiute Parts

100-016-001

3MIn Stock: 1117100-016-001 Datasheet

Current PartRFQ

AR 16-HZL/07-TT

Assmann WSW ComponentsIn Stock: 2631AR 16-HZL/07-TT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3M 100-016-001 is determined by the following critical parameters that must remain consistent:

• Number of positions and grid configuration: 16 (2 x 8)
• Socket type and row spacing: DIP, 0.3" (7.62mm)
• Mating pitch: 0.100" (2.54mm)
• Post pitch: 0.100" (2.54mm)
• Mounting method: Through Hole
• Mating contact material: Beryllium Copper
• Mating contact finish: Gold
• Termination method: Solder

The Assmann WSW Components AR 16-HZL/07-TT satisfies all critical substitution parameters for this product category. Both components share identical mechanical and electrical interface specifications required for DIP socket applications.

Parameter Comparison

Engineering Selection Recommendations

The Assmann WSW Components AR 16-HZL/07-TT is the designated substitute for the obsolete 3M 100-016-001. Selection of this substitute is supported by the following factors:

• Active product status ensures ongoing availability and manufacturing support
• ROHS3 compliance meets current regulatory requirements for new designs and production
• Identical mechanical interface specifications guarantee direct PCB compatibility
• Matching contact materials and finishes maintain electrical performance characteristics
• UL94 V-0 flammability rating is retained across both components
• Higher current rating (3 A versus 1 A) provides additional design margin

The operating temperature range of the substitute (-40°C ~ 105°C) is narrower than the original part (-65°C ~ 125°C). Applications requiring operation outside the -40°C to 105°C window must be evaluated for compatibility.

Frequently Asked Questions (FAQ)

Q: Can the Assmann AR 16-HZL/07-TT be used as a direct replacement for the 3M 100-016-001 on existing PCBs?

A: Yes. Both components share identical pitch specifications (0.100" mating and post), 16-position configuration, and through-hole mounting footprint. No PCB redesign is required.

Q: What are the key differences between these two sockets?

A: The primary differences are product status (obsolete versus active), RoHS compliance (non-compliant versus ROHS3 compliant), current rating (1 A versus 3 A), and operating temperature range (-65°C to 125°C versus -40°C to 105°C). The mechanical and electrical interface specifications remain identical.

Q: Does the narrower operating temperature range of the substitute affect compatibility?

A: The substitute operates from -40°C to 105°C. Applications requiring operation below -40°C or above 105°C must be evaluated against specific system requirements.

Q: Are there packaging differences between these components?

A: The 3M 100-016-001 is supplied with seal tape. The Assmann AR 16-HZL/07-TT is supplied in tube packaging. Both are suitable for automated assembly processes.

Q: What is the contact resistance specification for the substitute?

A: The Assmann AR 16-HZL/07-TT has a contact resistance of 4 mOhm, ensuring reliable electrical performance in signal and power distribution applications.