3M 10001 Terminal Butt Splice 6 AWG Crimp Connector - Equivalent & Substitute Parts

Part Overview

The 3M 10001 is an active, in-stock terminal butt splice connector designed for inline, individual opening crimp termination of 6 AWG copper wire. This non-insulated connector is part of the Scotchlok™ series and is RoHS compliant. Substitute parts are identified when equivalent electrical and mechanical parameters are required for applications where the original part is unavailable or when alternative sourcing is necessary.

Substiute Parts

10001

3MIn Stock: 144710001 Datasheet

Current PartRFQ

SCS6-L

Panduit CorpIn Stock: 1169SCS6-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3M 10001 terminal is based on the following critical parameters that must remain constant:

• Terminal Type: Butt Splice, Inline, Individual Openings
• Wire Gauge: 6 AWG
• Number of Wire Entries: 2
• Termination Method: Crimp
• Insulation: Non-Insulated
• Color: Blue

The Panduit Corp SCS6-L meets all these core electrical and mechanical requirements. Both parts are designed for identical wire gauge and termination application, with equivalent connector geometry and individual opening configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the 3M 10001 and Panduit SCS6-L are active products with current manufacturing status. Selection between these parts is based on availability and compliance requirements:

The 3M 10001 carries RoHS Compliant certification and is suitable for applications requiring standard RoHS compliance. The Panduit SCS6-L carries ROHS3 Compliant certification, meeting the more stringent ROHS3 standard. Both parts maintain REACH Unaffected status and identical ECCN and HTSUS classifications, confirming regulatory equivalence for export and tariff purposes.

Frequently Asked Questions (FAQ)

Q: Can the Panduit SCS6-L replace the 3M 10001 in existing applications?

A: Yes. Both parts share identical terminal type, wire gauge, wire entry configuration, termination method, insulation type, and color. The mechanical and electrical interface is equivalent.

Q: What is the difference between "Copper Wire Only" and "Copper Tubing" construction?

A: This parameter describes the internal conductor material composition. Both are copper-based conductors suitable for 6 AWG crimp termination. The difference does not affect substitution eligibility for equivalent electrical performance.

Q: Are there compliance differences between these parts?

A: The 3M 10001 is RoHS Compliant. The Panduit SCS6-L is ROHS3 Compliant, which represents a more recent and stringent standard. Both maintain REACH Unaffected status. Selection depends on specific compliance requirements of the end application.

Q: Does packaging affect substitution?

A: Both parts are supplied in Bulk packaging. Packaging format is identical and does not impact electrical or mechanical compatibility.

Q: What is the Moisture Sensitivity Level (MSL) difference?

A: The 3M 10001 has MSL 1 (Unlimited). The Panduit SCS6-L lists MSL as Not Applicable. This difference does not affect terminal performance or substitution suitability for standard storage and handling conditions.