0SLC010.T Equivalent & Substitute Parts Reference

Part Overview

The 0SLC010.T is a cartridge fuse manufactured by Littelfuse Inc. under the POWR-GARD® SLC series. This component is rated for 10A at 600 VAC / 170 VDC with medium blow response characteristics and is designed for electrical and industrial applications requiring a cartridge-style fuse holder. The part maintains active product status with full compliance to CE, CSA, QPL, and UL standards. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements while maintaining equivalent electrical and mechanical performance.

Substiute Parts

0SLC010.T

Littelfuse Inc.In Stock: 7250SLC010.T Datasheet

Current PartRFQ

SC-10

SeaHawkIn Stock: 937SC-10 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part SC-10 manufactured by SeaHawk has been identified in the provided substitute list. However, a critical incompatibility exists: the SC-10 is classified as a humidity and temperature sensor module, not a cartridge fuse. The SC-10 operates in the 5–95% RH range with a 0°C–75°C operating temperature specification and is packaged as a module for user-defined mounting applications.

Substitution between the 0SLC010.T and SC-10 cannot be established based on electrical and mechanical parameters. The 0SLC010.T is a protective fuse component with specific current interruption and voltage withstand ratings. The SC-10 is a sensing device with no current-carrying or overcurrent protection function. These components serve fundamentally different purposes and cannot be interchanged in any application context.

Parameter Comparison

Engineering Selection Recommendations

No valid substitute relationship exists between the 0SLC010.T and SC-10 based on functional equivalence, electrical ratings, or mechanical compatibility. The SC-10 cannot fulfill the overcurrent protection function of the 0SLC010.T cartridge fuse.

For applications requiring a 10A, 600 VAC / 170 VDC cartridge fuse with medium blow response and Class G rating, the 0SLC010.T remains the specified component. Alternative cartridge fuses from Littelfuse or other qualified manufacturers with identical electrical and dimensional specifications may be considered only if they maintain the same current rating, voltage ratings, breaking capacity, physical dimensions, and approval certifications (CE, CSA, QPL, UL).

Frequently Asked Questions (FAQ)

Q: Can the SC-10 be used as a replacement for the 0SLC010.T?

A: No. The SC-10 is a humidity and temperature sensor module. It has no overcurrent protection capability and cannot perform the electrical protection function of a cartridge fuse. These are functionally distinct component types.

Q: What parameters determine if a cartridge fuse can substitute for the 0SLC010.T?

A: A valid substitute must match the following parameters: current rating (10A), AC voltage rating (600 VAC), DC voltage rating (170 VDC), response time (medium blow), class designation (Class G), breaking capacity (100kA AC / 10kA DC), physical dimensions (0.406" Dia x 1.311" L), and approval certifications (CE, CSA, QPL, UL).

Q: Why is the SC-10 listed as a substitute if it is incompatible?

A: The SC-10 appears to be a data entry error or misclassification in the provided substitute list. No technical basis supports substitution between a fuse and a sensor module.

Q: Are there compliance considerations for selecting an alternative fuse?

A: Yes. Any substitute must maintain ROHS3 compliance and hold equivalent approvals from CE, CSA, QPL, and UL certification bodies to ensure regulatory and safety compliance in the intended application.

Q: What is the significance of the cartridge form factor and holder requirement?

A: The 0SLC010.T requires a dedicated fuse holder for installation. Any substitute must use the same cartridge dimensions (0.406" Dia x 1.311" L) to ensure mechanical fit within the existing holder assembly.