Littelfuse 0MIN015.MXGLO Automotive Miniature Blade Fuse - Equivalent & Substitute Parts

Part Overview

The Littelfuse 0MIN015.MXGLO is a 15 A automotive miniature blade fuse rated for 32 V AC and 32 V DC operation. This fast-blow fuse is designed for automotive electrical circuits requiring holder-based installation and meets SAE and UL approval standards. The part is currently active in production with 1337 units in stock. Substitute parts are necessary when specific packaging configurations, regional availability, or inventory constraints require alternative part numbers while maintaining identical electrical and mechanical performance.

Substiute Parts

0MIN015.MXGLO

LittelfuseIn Stock: 13970MIN015.MXGLO Datasheet

Current PartRFQ

0MIN015.HXGLO

Littelfuse Inc.In Stock: 11950MIN015.HXGLO Datasheet

Parametric EquivalentRFQ

0MIN015.V

Littelfuse Inc.In Stock: 8140MIN015.V Datasheet

Parametric EquivalentRFQ

0MIN015.VP

LittelfuseIn Stock: 7870MIN015.VP Datasheet

Parametric EquivalentRFQ

0MIN015.VPGLO

Littelfuse Inc.In Stock: 6810MIN015.VPGLO Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0MIN015.MXGLO is determined by the following critical parameters:

• Current Rating: 15 A (exact match required)
• Voltage Rating - AC: 32 V (exact match required)
• Voltage Rating - DC: 32 V (exact match required)
• Fuse Type: Automotive (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: Blade, Miniature (exact match required)
• Mounting Type: Requires Holder (exact match required)
• Physical Dimensions: 0.429" L x 0.150" W x 0.346" H (exact match required)
• Series: MINI® (exact match required)

All substitute parts listed below meet these criteria and are therefore electrically and mechanically interchangeable with the main part number.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active production items from Littelfuse and maintain full compliance with ROHS3 and REACH requirements. Selection between 0MIN015.MXGLO and its substitutes should be based on:

• Packaging configuration requirements (bulk versus card packaging)
• Regional availability and supply chain considerations
• Inventory levels and lead time constraints
• Certification requirements (SAE only versus SAE and UL)

The 0MIN015.MXGLO, 0MIN015.HXGLO, 0MIN015.V, and 0MIN015.VPGLO all carry dual SAE and UL approvals. The 0MIN015.VP carries SAE approval only. All parts are mechanically and electrically identical in function and performance.

Frequently Asked Questions (FAQ)

Q: Can 0MIN015.VP be used as a direct replacement for 0MIN015.MXGLO?

A: Yes. The 0MIN015.VP is electrically and mechanically identical. The difference is packaging (5-pack card versus bulk) and approval agency listing (SAE only versus SAE and UL). Verify that SAE-only certification meets your application requirements.

Q: What is the difference between the MXGLO, HXGLO, V, VP, and VPGLO part numbers?

A: These part numbers represent different packaging and certification configurations of the same 15 A, 32 V miniature blade fuse. All share identical electrical ratings, response time, physical dimensions, and mechanical mounting requirements. Differences are limited to packaging format and approval agency combinations.

Q: Are all substitute parts rated for the same voltage and current?

A: Yes. All listed substitutes are rated for 15 A at 32 V AC and 32 V DC operation with fast-blow response time.

Q: Can these fuses be used interchangeably in automotive circuits?

A: Yes, provided the circuit design specifies a 15 A, 32 V fast-blow miniature blade fuse. All substitute parts meet this specification and are approved for automotive use.

Q: What is the significance of the "GLO" suffix in part numbers?

A: The "GLO" suffix indicates a specific packaging or certification variant within the Littelfuse MINI® series. All GLO variants listed maintain identical electrical and mechanical specifications to non-GLO variants.