Equivalent & Substitute Parts for 0CNL175.V

Part Overview

The 0CNL175.V is a 175A fuse strip manufactured by Littelfuse Inc. under the POWR-GARD® CNL series. This bolt-mount fuse is rated for 32 VAC/32 VDC operation with fast-blow response characteristics and is designed for lift truck applications. The part is currently active in production with full RoHS3 compliance and UR approval agency certification. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when system voltage requirements differ.

Substiute Parts

0CNL175.V

Littelfuse Inc.In Stock: 8250CNL175.V Datasheet

Current PartRFQ

ANL-175

Eaton - Bussmann Electrical DivisionIn Stock: 879ANL-175 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0CNL175.V is determined by the following critical parameters:

• Current Rating: Must be 175A
• Fuse Type: Must be Fuse Strip
• Mounting Type: Must be Bolt Mount
• Response Time: Must be Fast Blow
• Approval Agency: Must include UR certification
• RoHS Compliance: Must be ROHS3 Compliant

The ANL-175 manufactured by Eaton - Bussmann Electrical Division meets all substitution criteria. While the ANL-175 operates at a higher DC voltage rating (80 VDC versus 32 VDC), it maintains identical current rating, fuse type, mounting configuration, and response characteristics. The increased voltage rating provides compatibility in systems operating at or below the original specification.

Parameter Comparison

Engineering Selection Recommendations

Both the 0CNL175.V and ANL-175 are active production parts with full RoHS3 compliance and UR approval certification. Selection between these parts should be based on system voltage requirements and physical form factor constraints.

The 0CNL175.V is the primary specification for systems rated at 32 VAC/32 VDC. The ANL-175 is suitable as a substitute in DC-only applications operating at voltages up to 80 VDC. The ANL-175 provides a higher breaking capacity (2.7kA versus 2.5kA) and is available in rectangular blade configuration, which may affect mounting compatibility depending on the application's physical constraints.

Frequently Asked Questions (FAQ)

Q: Can the ANL-175 be used as a direct replacement for the 0CNL175.V in all applications?

A: The ANL-175 is suitable for DC applications operating at or below 80 VDC. For AC applications or systems specifically rated for 32 VAC operation, the 0CNL175.V remains the specified part. Both parts share identical current rating, fuse type, mounting method, and response characteristics.

Q: What is the difference in package configuration between these parts?

A: The 0CNL175.V uses a cylindrical blade terminal configuration, while the ANL-175 uses a rectangular blade configuration. Physical mounting space and terminal compatibility must be verified before substitution.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the 0CNL175.V and ANL-175 are ROHS3 compliant, REACH unaffected, and carry UR approval agency certification. Both parts are classified as active production items.

Q: What is the significance of the higher breaking capacity in the ANL-175?

A: The ANL-175 has a breaking capacity of 2.7kA compared to 2.5kA for the 0CNL175.V. This indicates the ANL-175 can safely interrupt higher fault currents at its rated voltage. This specification is relevant only when the system's maximum available fault current is known and must be evaluated against the application's requirements.