Littelfuse 0CBO010.V Equivalent & Substitute Parts

Part Overview

The Littelfuse 0CBO010.V is a 10A 32 VDC fast-blow cartridge fuse with bolt mount configuration, part of the POWR-GARD® CBO series. This component is classified as obsolete, making identification of suitable substitute parts essential for system maintenance and component replacement in lift truck applications. The cylindrical design with blade terminal mounting provides direct compatibility assessment with active alternative products.

Substiute Parts

0CBO010.V

Littelfuse Inc.In Stock: 8160CBO010.V Datasheet

Current PartRFQ

CGL-10

Eaton - Bussmann Electrical DivisionIn Stock: 1187CGL-10 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 0CBO010.V is determined by the following critical parameters:

• Current Rating: 10A (exact match required)
• Mounting Type: Bolt Mount (mechanical compatibility)
• Package / Case: Cylindrical, Blade Terminal (Bolt) (physical fit requirement)
• Fuse Type: Cartridge (functional equivalence)

The Eaton Bussmann CGL-10 satisfies these core substitution criteria. While the CGL-10 operates at higher voltage ratings (600 VAC / 250 VDC versus 32 VDC), this represents an uprated capability suitable for the 0CBO010.V application. Both components share identical current ratings, mounting configurations, and physical package specifications, enabling direct mechanical and electrical substitution within systems designed for the original part.

Parameter Comparison

Engineering Selection Recommendations

The CGL-10 is the manufacturer-recommended substitute for the 0CBO010.V. Selection of this alternative is supported by:

• Active product status, ensuring ongoing availability and supply chain continuity
• RoHS compliance, meeting current environmental and regulatory standards
• CE and CSA certifications, providing third-party validation for safety and performance
• Identical current rating and mounting configuration, enabling direct mechanical replacement
• Higher voltage ratings (250 VDC / 600 VAC), providing operational margin above the original 32 VDC specification

The marginal dimensional difference in length (0.375" additional) must be verified for fit within the original mounting cavity before installation.

Frequently Asked Questions (FAQ)

Q: Can the CGL-10 be used as a direct replacement for the 0CBO010.V?

A: Yes. Both components share identical current ratings (10A), mounting types (bolt mount), and package configurations (cylindrical, blade terminal). The CGL-10 is the manufacturer-recommended substitute.

Q: What is the significance of the higher voltage rating on the CGL-10?

A: The CGL-10 operates at 250 VDC and 600 VAC, compared to the 0CBO010.V at 32 VDC. This represents an uprated capability. The substitute is suitable for applications at or below the original voltage specification.

Q: Does the dimensional difference affect installation?

A: The CGL-10 is 0.375" longer (2.000" versus 1.625"). Physical clearance within the mounting cavity must be confirmed before installation to ensure proper fit and function.

Q: What is the difference in response time between these parts?

A: The 0CBO010.V is specified as fast-blow. The CGL-10 response time is not provided in the available data. Verify response time requirements for your specific application.

Q: Are there compliance differences between these parts?

A: The 0CBO010.V is RoHS non-compliant. The CGL-10 is RoHS compliant and carries CE and CSA certifications, meeting current regulatory standards.

Q: What is the breaking capacity of the CGL-10?

A: The breaking capacity of the CGL-10 is not specified in the available data. Refer to the manufacturer's technical documentation for this parameter.