Littelfuse 0AGC035 Series Glass Cartridge Fuse - Equivalent & Substitute Parts

Part Overview

The Littelfuse 0AGC035 is a 35 A glass cartridge fuse rated for 32 V AC/DC operation. This fuse is designed for use in 3AB and 3AG holder configurations with standard 1/4" x 1-1/4" dimensions. The part is actively manufactured and maintained in inventory. Substitute parts are identified to provide alternative packaging or compliance options while maintaining identical electrical and mechanical specifications.

Substiute Parts

0AGC035.V

Littelfuse Inc.In Stock: 11940AGC035.V Datasheet

Current PartRFQ

0AGC035.VP

Littelfuse Inc.In Stock: 10190AGC035.VP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the 0AGC035 series is determined by electrical and mechanical parameter equivalence. The following parameters must remain constant for valid substitution:

• Current Rating: 35 A
• Voltage Rating (AC/DC): 32 V
• Fuse Type: Cartridge, Glass
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4"
• Physical Dimensions: 0.250" Dia x 1.250" L

Substitute parts may differ in packaging configuration (individual unit versus bulk pack) and RoHS compliance status. Both the main part and substitute maintain identical electrical performance and mechanical compatibility with standard 3AB/3AG fuse holders.

Parameter Comparison

Engineering Selection Recommendations

Both 0AGC035.V and 0AGC035.VP are electrically and mechanically equivalent for circuit protection applications requiring 35 A at 32 V AC/DC operation. Selection between these parts depends on regulatory and procurement requirements:

The 0AGC035.V is suitable for applications where RoHS non-compliant components are acceptable and individual unit packaging is preferred.

The 0AGC035.VP is the appropriate choice for applications requiring ROHS3 compliance and REACH compliance verification. This variant is supplied in 5-pack cardboard configuration, making it suitable for higher-volume procurement or inventory management strategies.

Both parts are active products with current manufacturing status and equivalent inventory availability.

Frequently Asked Questions (FAQ)

Q: Can 0AGC035.VP be used as a direct replacement for 0AGC035.V?

A: Yes. Both parts are electrically and mechanically identical. They share the same current rating (35 A), voltage rating (32 V AC/DC), fuse type (cartridge glass), and physical dimensions (0.250" Dia x 1.250" L). Both are compatible with 3AB and 3AG fuse holders.

Q: What is the difference between these two part numbers?

A: The primary differences are packaging configuration and regulatory compliance. 0AGC035.V is supplied as an individual unit with RoHS non-compliant status. 0AGC035.VP is supplied in a 5-pack cardboard configuration and is ROHS3 compliant with REACH compliance verification.

Q: Which part should I select for a new design?

A: Selection depends on your application's regulatory requirements. If ROHS3 and REACH compliance are mandatory, use 0AGC035.VP. If compliance requirements do not apply, either part is functionally equivalent.

Q: Are these fuses compatible with standard fuse holders?

A: Yes. Both parts are designed for use with 3AB and 3AG fuse holder configurations. The 1/4" x 1-1/4" form factor is standard for these holder types.

Q: Can I mix these part numbers in the same application?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same circuit or system without performance impact.