Equivalent & Substitute Parts for 0AFH0015Z

Part Overview

The 0AFH0015Z is a fuse holder manufactured by Littelfuse Inc., designed for single-circuit blade fuse applications with panel mount configuration. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and new design implementations. The part accommodates standard ATC and ATO blade fuses with dimensions of 0.75" L x 0.2" W (19.1mm x 5.1mm) and features wire lead termination for direct circuit integration.

Substiute Parts

0AFH0015Z

Littelfuse Inc.In Stock: 10240AFH0015Z Datasheet

Current PartRFQ

BK/HHC-R

Eaton - Bussmann Electrical DivisionIn Stock: 1781BK/HHC-R Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0AFH0015Z is determined by the following critical parameters:

• Fuse size compatibility: 0.75" L x 0.2" W (19.1mm x 5.1mm)
• Blade fuse type support for ATC and ATO standards
• Single-circuit configuration
• Wire lead termination style

The identified substitute, BK/HHC-R, maintains compatibility across all mechanical and electrical interface requirements. While the substitute features a free hanging (in-line) mounting configuration compared to the panel mount design of the original part, both holders accommodate identical fuse dimensions and blade fuse standards, enabling functional equivalence in applications where mounting method flexibility exists.

Parameter Comparison

Engineering Selection Recommendations

The BK/HHC-R serves as the primary substitute for the obsolete 0AFH0015Z. Selection of this alternative is supported by:

• Mechanical compatibility: Identical fuse dimensions and blade fuse standard support
• Electrical interface: Wire lead termination matches the original design
• Product status: Active manufacturing status ensures availability and supply chain continuity
• Regulatory compliance: ROHS3 compliance addresses modern environmental and safety requirements, whereas the original part carries non-compliant status

The primary design consideration involves mounting configuration. The BK/HHC-R employs free hanging (in-line) mounting, whereas the 0AFH0015Z uses panel mount. This difference requires evaluation within the specific application context to determine feasibility of the alternative mounting method.

Frequently Asked Questions (FAQ)

Q: Can the BK/HHC-R directly replace the 0AFH0015Z in all applications?

A: The BK/HHC-R maintains full mechanical and electrical compatibility for fuse accommodation. However, the mounting configuration differs: the original part is panel-mounted while the substitute is free hanging (in-line). Substitution feasibility depends on whether the application can accommodate the alternative mounting method.

Q: What fuse types are compatible with both holders?

A: Both the 0AFH0015Z and BK/HHC-R accommodate ATC and ATO blade fuses with dimensions of 0.75" L x 0.2" W (19.1mm x 5.1mm).

Q: Are there voltage or current limitations when using the BK/HHC-R?

A: The BK/HHC-R is rated for 16 A at 32V. The original 0AFH0015Z does not specify voltage or current ratings in available documentation. Verify that the substitute's ratings align with circuit requirements.

Q: What is the significance of the RoHS compliance difference?

A: The 0AFH0015Z is RoHS non-compliant, while the BK/HHC-R is ROHS3 compliant. For applications subject to environmental or regulatory requirements, the compliant substitute is the appropriate choice.

Q: Are both parts available in the same packaging?

A: The 0AFH0015Z is available in standard packaging, while the BK/HHC-R is supplied in bulk packaging. Verify packaging requirements for procurement and inventory management.