0ADGP9300-RE Ceramic Cartridge Fuse Equivalent & Substitute Parts

Part Overview

The 0ADGP9300-RE is a 30 A ceramic cartridge fuse manufactured by Bel Fuse Inc., rated for 500 V AC and 500 V DC operation. This through-hole mounted fuse is designed for circuit protection applications requiring high voltage ratings and reliable performance across industrial and commercial environments. The part maintains Active product status with 962 units in current inventory stock.

Identifying equivalent and substitute parts is necessary when the primary part becomes unavailable, when supply chain optimization is required, or when alternative manufacturers offer compatible solutions that meet identical electrical and mechanical specifications.

Substiute Parts

0ADGP9300-RE

Bel Fuse Inc.In Stock: 10380ADGP9300-RE Datasheet

Current PartRFQ

BK-ADC-V2-30-R

Eaton - Electronics DivisionIn Stock: 824BK-ADC-V2-30-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 0ADGP9300-RE is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Current Rating: 30 A (exact match required)
• Voltage Rating AC: 500 V (exact match required)
• Voltage Rating DC: 500 V (exact match required)

Mechanical Specifications:

• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (Axial) (exact match required)
• Mounting Type: Through Hole (exact match required)
• Physical Dimensions: 0.268" Dia x 1.291" L (exact match required)

Environmental & Compliance:

• Operating Temperature Range: -50°C ~ 125°C (exact match required)
• RoHS Status: ROHS3 Compliant (minimum requirement)
• Fuse Type: Cartridge, Ceramic (exact match required)

The substitute part BK-ADC-V2-30-R manufactured by Eaton - Electronics Division meets all critical parameters for direct substitution in applications where the 0ADGP9300-RE is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the 0ADGP9300-RE and BK-ADC-V2-30-R are Active products with current manufacturer support and full compliance with ROHS3 and REACH requirements. The BK-ADC-V2-30-R carries additional UL certification in addition to cURus approval, providing expanded regulatory coverage for certain applications.

Selection between these parts should be based on:

Availability: The 0ADGP9300-RE currently maintains 962 units in inventory, while the BK-ADC-V2-30-R has 778 units available. Either part is suitable for immediate procurement.

Regulatory Requirements: Applications requiring UL certification should specify the BK-ADC-V2-30-R. Applications requiring only cURus certification can use either part.

Electrical Performance Characteristics: The BK-ADC-V2-30-R is specified as Fast Blow response with higher breaking capacity ratings (30 kA AC, 20 kA DC) compared to the 0ADGP9300-RE (1 kA). The 0ADGP9300-RE has higher melting I²t (2350 vs 270), indicating slower thermal response. Application-specific requirements for response time and breaking capacity must be evaluated against circuit protection needs.

Both parts are mechanically and electrically interchangeable for applications where the specified electrical characteristics are acceptable.

Frequently Asked Questions (FAQ)

Q: Can the BK-ADC-V2-30-R be used as a direct replacement for the 0ADGP9300-RE?

A: Yes. Both parts share identical current ratings (30 A), voltage ratings (500 V AC / 500 V DC), package specifications (3AB, 3AG, 1/4" x 1-1/4"), physical dimensions (0.268" Dia x 1.291" L), and operating temperature ranges (-50°C ~ 125°C). Direct substitution is electrically and mechanically compatible.

Q: What are the differences between these two fuses?

A: The primary differences are manufacturer identity and response characteristics. The BK-ADC-V2-30-R is specified as Fast Blow with breaking capacity of 30 kA AC and 20 kA DC, while the 0ADGP9300-RE has a breaking capacity of 1 kA. The 0ADGP9300-RE has a higher melting I²t value (2350 vs 270), indicating slower thermal response. The BK-ADC-V2-30-R carries both cURus and UL certifications, while the 0ADGP9300-RE carries cURus certification.

Q: Are there any package or mounting differences?

A: No. Both parts use identical 3AB, 3AG package specifications with 1/4" x 1-1/4" axial dimensions and through-hole mounting. Physical dimensions are identical at 0.268" diameter by 1.291" length (6.81mm x 32.79mm).

Q: Which part should I select for new designs?

A: Selection depends on application requirements. For applications requiring Fast Blow response and higher breaking capacity, the BK-ADC-V2-30-R is appropriate. For applications where slower response and lower breaking capacity are acceptable, either part is suitable. If UL certification is required, specify the BK-ADC-V2-30-R.

Q: Are both parts currently available?

A: Yes. The 0ADGP9300-RE has 962 units in stock, and the BK-ADC-V2-30-R has 778 units in stock. Both maintain Active product status with current manufacturer support.

Q: Do these fuses meet environmental compliance requirements?

A: Yes. Both the 0ADGP9300-RE and BK-ADC-V2-30-R are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations for electronic components.