Equivalent & Substitute Parts for 0ADAP3150-RE

Part Overview

The 0ADAP3150-RE is a ceramic cartridge fuse manufactured by Bel Fuse Inc., rated at 3.15 A with 600 V AC/DC voltage capability. This through-hole mounted fuse is designed for fast-blow applications in industrial and commercial electrical systems. The part is currently active in production with 959 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to component availability, supply chain considerations, or design standardization across manufacturing platforms.

Substiute Parts

0ADAP3150-RE

Bel Fuse Inc.In Stock: 10610ADAP3150-RE Datasheet

Current PartRFQ

BK-AHC-V-3-15-R

Eaton - Electronics DivisionIn Stock: 1071BK-AHC-V-3-15-R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0ADAP3150-RE is determined by strict alignment of the following critical parameters:

• Current Rating: 3.15 A (exact match required)
• Voltage Rating - AC: 600 V (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (Axial) (exact match required)
• Breaking Capacity @ Rated Voltage: 10 kA (exact match required)
• Mounting Type: Through Hole (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The BK-AHC-V-3-15-R from Eaton - Electronics Division meets all substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 0ADAP3150-RE and BK-AHC-V-3-15-R are active production components with equivalent electrical and mechanical specifications. The 0ADAP3150-RE carries cURus approval, while the BK-AHC-V-3-15-R carries UL approval. Both parts are ROHS3 compliant and operate across the identical temperature range of -55°C to 125°C. Selection between these parts should be based on supply availability, approval agency requirements for the target application, and inventory status. The BK-AHC-V-3-15-R currently has 1055 units in stock compared to 959 units for the 0ADAP3150-RE.

Frequently Asked Questions (FAQ)

Q: Can the BK-AHC-V-3-15-R be used as a direct replacement for the 0ADAP3150-RE?

A: Yes. Both parts share identical current rating (3.15 A), voltage ratings (600 V AC/DC), fuse type (ceramic cartridge), response time (fast blow), package designation (3AB, 3AG, 1/4" x 1-1/4"), breaking capacity (10 kA), and operating temperature range (-55°C to 125°C). Both are ROHS3 compliant and active production parts.

Q: What are the dimensional differences between these parts?

A: The 0ADAP3150-RE measures 0.266" diameter x 1.292" height (6.76mm x 32.82mm). The BK-AHC-V-3-15-R measures 0.275" diameter x 1.288" length (6.99mm x 32.72mm). These minor dimensional variations remain within the 3AB, 3AG standard package specification and do not affect mechanical compatibility in standard through-hole fuse holders.

Q: Are there differences in electrical characteristics between these parts?

A: The DC cold resistance differs slightly (0.06 Ohms for 0ADAP3150-RE versus 0.083 Ohms for BK-AHC-V-3-15-R). The melting I²t values also differ (9.92 versus 4). These variations are within acceptable tolerances for fast-blow ceramic cartridge fuses at this current rating and do not affect functional equivalence for standard circuit protection applications.

Q: Which approval agency certification should I select?

A: The 0ADAP3150-RE carries cURus approval, while the BK-AHC-V-3-15-R carries UL approval. Selection depends on your application's regulatory requirements. Both certifications are recognized for industrial and commercial electrical equipment.

Q: Are both parts suitable for 600 V DC applications?

A: The 0ADAP3150-RE is explicitly rated for 600 V DC. The BK-AHC-V-3-15-R specification indicates 600 V AC/DC capability. Both parts are suitable for 600 V DC applications.