Equivalent & Substitute Parts for 0ADAP0600-RE

Part Overview

The 0ADAP0600-RE is a 600 mA ceramic cartridge fuse manufactured by Bel Fuse Inc., rated for 600 V AC and 600 V DC operation. This through-hole component is designed for fast-blow response in electrical and industrial applications. The part is currently active in production with 1194 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain diversification is required.

Substiute Parts

0ADAP0600-RE

Bel Fuse Inc.In Stock: 12890ADAP0600-RE Datasheet

Current PartRFQ

BK-AHC-V-600-R

Eaton - Electronics DivisionIn Stock: 1164BK-AHC-V-600-R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0ADAP0600-RE is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• Current Rating: 600 mA (exact match required)
• Voltage Rating (AC): 600 V (exact match required)
• Voltage Rating (DC): 600 V (exact match required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (Axial) (exact match required)
• Mounting Type: Through Hole (exact match required)
• Breaking Capacity @ Rated Voltage: 10 kA (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Approval Agency: cURus (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute part BK-AHC-V-600-R from Eaton - Electronics Division meets all critical electrical and mechanical parameters, making it a direct functional equivalent for applications requiring the 0ADAP0600-RE.

Parameter Comparison

Engineering Selection Recommendations

Both the 0ADAP0600-RE and BK-AHC-V-600-R are active production parts with cURus approval and ROHS3 compliance. Selection between these parts should be based on availability and supply chain requirements. The BK-AHC-V-600-R from Eaton - Electronics Division provides equivalent electrical performance and mechanical compatibility for direct substitution in applications currently using the 0ADAP0600-RE. Both parts satisfy identical voltage, current, temperature, and breaking capacity specifications required for 600 V AC/DC circuit protection applications.

Frequently Asked Questions (FAQ)

Q: Can the BK-AHC-V-600-R replace the 0ADAP0600-RE in existing designs?

A: Yes. The BK-AHC-V-600-R meets all critical electrical and mechanical parameters: 600 mA current rating, 600 V AC/DC voltage rating, fast-blow response, 3AB ceramic cartridge package, 10 kA breaking capacity, and identical operating temperature range. Physical dimensions and mounting type are identical, enabling direct substitution without circuit modification.

Q: Are there differences in DC cold resistance between these parts?

A: The 0ADAP0600-RE has a DC cold resistance of 1.035 Ohms, while the BK-AHC-V-600-R has 784.5 mOhms. Both values are within acceptable ranges for ceramic cartridge fuses of this class and do not affect substitution eligibility for standard circuit protection applications.

Q: Do both parts carry the same regulatory approvals?

A: Yes. Both the 0ADAP0600-RE and BK-AHC-V-600-R are cURus approved and ROHS3 compliant, meeting identical regulatory and environmental standards.

Q: What is the significance of the 3AB package designation?

A: The 3AB designation identifies the fuse as a ceramic cartridge with 1/4" x 1-1/4" (6.76mm x 32.82mm) dimensions, fast-blow characteristics, and 600 V rating. This standardized package ensures mechanical and electrical compatibility across both parts for through-hole mounting applications.

Q: Are there inventory considerations for selecting between these parts?

A: The 0ADAP0600-RE has 1194 units in stock, while the BK-AHC-V-600-R has 1058 units available. Selection should account for current supply levels and lead time requirements for your application.