0ADAP0200-RE Equivalent & Substitute Parts

Part Overview

The 0ADAP0200-RE is a 200 mA ceramic cartridge fuse rated for 600 V AC/DC operation, manufactured by Bel Fuse Inc. This fast-blow fuse is designed for through-hole mounting in axial configuration (3AB, 3AG package) and is suitable for electrical and industrial applications requiring overcurrent protection. The part maintains active product status with cURus approval certification and ROHS3 compliance. Substitute parts are identified when equivalent electrical ratings, mechanical dimensions, and safety certifications align with the original specification.

Substiute Parts

0ADAP0200-RE

Bel Fuse Inc.In Stock: 14140ADAP0200-RE Datasheet

Current PartRFQ

BK-AHC-V-200-R

Eaton - Electronics DivisionIn Stock: 1282BK-AHC-V-200-R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0ADAP0200-RE is determined by strict equivalence across the following parameters:

• Current Rating: 200 mA (exact match required)
• Voltage Rating: 600 V AC and 600 V DC (both required)
• Fuse Type: Cartridge, Ceramic (exact match required)
• Response Time: Fast Blow (exact match required)
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" Axial (exact match required)
• Mounting Type: Through Hole (exact match required)
• Breaking Capacity: 10 kA @ Rated Voltage (exact match required)
• Operating Temperature: -55°C ~ 125°C (exact match required)
• Approval Agency: cURus certification (required)
• RoHS Status: ROHS3 Compliant (required)

The substitute part BK-AHC-V-200-R meets all specified criteria and is therefore classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 0ADAP0200-RE and BK-AHC-V-200-R are active products with identical electrical and mechanical specifications. Selection between these parts may be based on:

• Availability and lead time from respective manufacturers
• Inventory status and supply chain considerations
• DC cold resistance tolerance requirements (0ADAP0200-RE: 3.9 Ohms; BK-AHC-V-200-R: 4.31 Ohms)
• Organizational procurement preferences and supplier agreements

Both parts carry cURus approval and ROHS3 compliance, meeting regulatory requirements for industrial and electrical applications.

Frequently Asked Questions (FAQ)

Q: Can BK-AHC-V-200-R be used as a direct replacement for 0ADAP0200-RE?

A: Yes. Both parts are rated for 200 mA at 600 V AC/DC, feature identical fast-blow ceramic cartridge construction, share the same 3AB/3AG axial package dimensions, and carry equivalent cURus certification and ROHS3 compliance.

Q: Are there dimensional differences between these fuses?

A: No. Both parts measure 0.266" diameter x 1.292" length (6.76mm x 32.82mm) and are mechanically interchangeable in through-hole applications.

Q: What is the significance of the DC cold resistance difference?

A: The DC cold resistance values (0ADAP0200-RE: 3.9 Ohms; BK-AHC-V-200-R: 4.31 Ohms) represent minor manufacturing tolerances within the ceramic cartridge fuse category. Both values are within acceptable ranges for this fuse class and do not affect functional substitution in standard applications.

Q: Do both parts meet the same safety certifications?

A: Yes. Both the 0ADAP0200-RE and BK-AHC-V-200-R carry cURus approval and are ROHS3 compliant, meeting identical regulatory standards for industrial and electrical use.

Q: What determines if a fuse can substitute for the 0ADAP0200-RE?

A: Substitution requires exact equivalence in current rating (200 mA), voltage rating (600 V AC/DC), fuse type (ceramic cartridge), response time (fast blow), package configuration (3AB/3AG axial), breaking capacity (10 kA), operating temperature range (-55°C to 125°C), and safety certifications (cURus, ROHS3).