Equivalent & Substitute Parts for 0ACJ-6000-TE

Part Overview

The 0ACJ-6000-TE is a 6 A, 350 V AC / 400 V DC surface mount board mount fuse manufactured by Bel Fuse Inc. This fast blow fuse is designed for SMD applications with a 2-SMD square end block package configuration. The part is currently active in production with full cURus approval agency certification and ROHS3 compliance. Substitute parts are identified to provide alternative sourcing options when primary inventory is unavailable or when supply chain diversification is required.

Substiute Parts

0ACJ-6000-TE

Bel Fuse Inc.In Stock: 19610ACJ-6000-TE Datasheet

Current PartRFQ

TR-1350HV6-R

Eaton - Electronics DivisionIn Stock: 1978TR-1350HV6-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0ACJ-6000-TE is determined by strict equivalence across the following critical parameters:

• Current Rating: 6 A (exact match required)
• Voltage Rating - AC: 350 V (exact match required)
• Voltage Rating - DC: 400 V (exact match required)
• Response Time: Fast Blow (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Package / Case: 2-SMD, Square End Block (exact match required)
• Breaking Capacity @ Rated Voltage: 100 A AC, 200 A DC (exact match required)
• Melting I²t: 15 (exact match required)
• Operating Temperature Range: -40°C ~ 125°C (exact match required)
• Physical Dimensions: 0.520" L x 0.199" W x 0.199" H (exact match required)
• Approval Agency: cURus (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute part TR-1350HV6-R manufactured by Eaton - Electronics Division meets all critical electrical, mechanical, and compliance parameters and is classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the 0ACJ-6000-TE and TR-1350HV6-R are active production parts with identical electrical specifications, mechanical dimensions, and regulatory certifications. Selection between these parts is based on availability and supply chain requirements rather than technical performance differences.

The 0ACJ-6000-TE is manufactured by Bel Fuse Inc. with 1942 pieces in current inventory. The TR-1350HV6-R is manufactured by Eaton - Electronics Division with 1881 pieces in current inventory. Both parts carry cURus approval and ROHS3 compliance certification, confirming suitability for regulated applications.

DC cold resistance values are equivalent when expressed in standard units (0.0163 Ohms). Both parts are classified as MSL 1 with unlimited moisture sensitivity protection, suitable for standard storage and handling conditions.

Frequently Asked Questions (FAQ)

Q: Can TR-1350HV6-R be used as a direct replacement for 0ACJ-6000-TE in existing designs?

A: Yes. The TR-1350HV6-R meets all electrical, mechanical, and compliance parameters specified for the 0ACJ-6000-TE. No circuit modifications or PCB layout changes are required. Both parts share identical current ratings (6 A), voltage ratings (350 V AC / 400 V DC), response time (fast blow), package configuration (2-SMD square end block), and physical dimensions (13.20mm x 5.05mm x 5.05mm).

Q: Are there any differences in breaking capacity between these parts?

A: No. Both parts have identical breaking capacity ratings of 100 A AC and 200 A DC at rated voltage.

Q: Do both parts have the same thermal operating range?

A: Yes. Both the 0ACJ-6000-TE and TR-1350HV6-R operate across the temperature range of -40°C to 125°C.

Q: What is the significance of the melting I²t value of 15?

A: The melting I²t value of 15 defines the thermal energy required to melt the fuse element. This parameter is identical for both parts and determines the fuse's response characteristics under overcurrent conditions.

Q: Are both parts compliant with RoHS regulations?

A: Yes. Both the 0ACJ-6000-TE and TR-1350HV6-R are ROHS3 compliant and carry cURus approval agency certification.

Q: What is the moisture sensitivity level (MSL) for these fuses?

A: Both parts are classified as MSL 1 with unlimited moisture sensitivity protection. This classification indicates minimal moisture absorption risk and allows for standard storage and handling without special environmental controls.

Q: Can these parts be used interchangeably in high-reliability applications?

A: Yes. Both parts carry identical cURus certifications and ROHS3 compliance status. The parametric equivalence across all critical electrical and mechanical specifications supports interchangeable use in applications requiring regulatory compliance and consistent performance.

Q: What is the difference between the two manufacturers' part numbers?

A: The 0ACJ-6000-TE is the Bel Fuse Inc. designation within the 0ACJ series. The TR-1350HV6-R is the Eaton - Electronics Division designation within the 1350HV series. Both part numbers reference functionally identical components with different manufacturer identifiers.