09HR-6S Equivalent & Substitute Parts

Part Overview

The 09HR-6S is a 9-position rectangular receptacle connector manufactured by JST Sales America Inc., designed for IDC (Insulation Displacement Connector) termination with 26 AWG discrete wiring. This connector features a tin contact finish, detent lock fastening, and closed-end design for free-hanging in-line mounting applications. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations.

Substiute Parts

09HR-6S

JST Sales America Inc.In Stock: 92509HR-6S Datasheet

Current PartRFQ

09HR-6S-P-N

JST Sales America Inc.In Stock: 95409HR-6S-P-N Datasheet

DirectRFQ

177534-9

TE Connectivity AMP ConnectorsIn Stock: 886177534-9 Datasheet

SimilarRFQ

2-177534-9

TE Connectivity AMP ConnectorsIn Stock: 9332-177534-9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 09HR-6S are classified based on strict electrical and mechanical parameter compatibility:

Direct Equivalent (Same Manufacturer): The 09HR-6S-P-N is a direct equivalent from JST Sales America Inc. This part maintains identical specifications for connector type, position count, pitch, mounting configuration, fastening type, cable termination method, wire gauge, features, contact finish, and color. The primary distinction is product status: 09HR-6S-P-N is active and RoHS compliant, whereas the original 09HR-6S is obsolete and RoHS non-compliant.

Similar Alternatives (Cross-Manufacturer): The TE Connectivity AMP Connectors parts 177534-9 and 2-177534-9 are classified as similar alternatives. These parts share the following critical parameters: 9-position receptacle configuration, 0.098" (2.50mm) pitch, single-row layout, free-hanging in-line mounting, IDC cable termination, tin contact finish, and identical moisture sensitivity level. However, these alternatives accept a broader wire gauge range (24-28 AWG versus the specified 26 AWG), feature different fastening type specifications, and are available in different color options (black and natural respectively). Both TE Connectivity alternatives are RoHS compliant and active products.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): The 09HR-6S-P-N is the recommended direct substitute. This part maintains complete electrical and mechanical compatibility with the original 09HR-6S while offering improved compliance status. The 09HR-6S-P-N is RoHS compliant and carries active product status, making it suitable for both legacy system maintenance and new designs requiring equivalent functionality.

For Cross-Manufacturer Substitution: The TE Connectivity AMP Connectors alternatives (177534-9 and 2-177534-9) are suitable substitutes when JST equivalents are unavailable. Both parts maintain the critical connector architecture, pitch, position count, and mounting configuration. The broader wire gauge acceptance (24-28 AWG) accommodates the original 26 AWG specification. Both alternatives are RoHS compliant with active product status. Selection between these two TE options depends on color requirement: 177534-9 for black housings or 2-177534-9 for natural color matching the original specification.

Frequently Asked Questions (FAQ)

Q: Can the 09HR-6S-P-N be used as a direct replacement for the 09HR-6S? A: Yes. The 09HR-6S-P-N maintains identical electrical and mechanical specifications including connector type, position count, pitch, mounting configuration, cable termination method, wire gauge, contact finish, and color. The primary difference is product status and RoHS compliance.

Q: What are the key differences between the JST direct equivalent and TE Connectivity alternatives? A: The JST 09HR-6S-P-N is identical to the original part. The TE Connectivity alternatives (177534-9 and 2-177534-9) accept a broader wire gauge range (24-28 AWG versus 26 AWG only) and differ in fastening type specification and color options. All three alternatives share the same connector architecture, pitch, position count, and mounting type.

Q: Are the TE Connectivity parts compatible with existing 09HR-6S installations? A: The TE Connectivity parts are mechanically and electrically compatible for applications using 26 AWG wiring within the IDC termination specification. The broader wire gauge range does not affect compatibility with 26 AWG discrete wiring. Verify fastening type requirements for your specific application.

Q: What is the significance of RoHS compliance for these parts? A: The original 09HR-6S is RoHS non-compliant. Both the 09HR-6S-P-N and TE Connectivity alternatives are RoHS compliant, meeting current environmental and regulatory requirements for new designs and systems subject to RoHS directives.

Q: Does color selection affect electrical performance? A: No. Color is a cosmetic specification. The 177534-9 (black) and 2-177534-9 (natural) are electrically identical. Select based on visual identification requirements or existing system color coding standards.

Q: What is the inventory status for these substitute parts? A: The 09HR-6S-P-N has 940 pieces in stock. The 177534-9 has 816 pieces in stock. The 2-177534-9 has 833 pieces in stock. All are available as new original components.