HARTING 09734642804 DIN 41612 Backplane Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09734642804 is a 96-position DIN 41612 receptacle connector with female sockets, gold-plated contacts, and right-angle through-hole mounting. This connector is designed for backplane applications requiring high-density interconnection in industrial and telecommunications equipment. The part is currently active in production with 843 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, supply chain considerations, or design flexibility needs.

Substiute Parts

09734642804

HARTINGIn Stock: 91509734642804 Datasheet

Current PartRFQ

86094648813755V1LF

Amphenol ICC (FCI)In Stock: 137886094648813755V1LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09734642804 is determined by strict alignment of the following critical parameters:

• Connector Type & Configuration: Receptacle with female sockets, 96 positions, 64 positions loaded, 3-row arrangement, right-angle mounting
• Electrical Interface: 0.100" (2.54mm) pitch, solder termination, gold contact finish
• Physical Form Factor: Through-hole mounting, DIN 41612 series compatibility
• Environmental & Compliance: Operating temperature range -55°C to 125°C, UL94 V-0 flammability rating, MSL 1 rating

The identified substitute part meets these core requirements. Variations in current rating, insulation material, and compliance certifications are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Primary Part - HARTING 09734642804: Select this part when the 2A current rating is required for the application and ROHS3 compliance is specified. The PCT glass-filled insulation material provides enhanced mechanical and thermal stability.

Substitute Part - Amphenol ICC (FCI) 86094648813755V1LF: This part is suitable for applications where the 1.5A current rating meets system requirements. Both parts maintain UL94 V-0 flammability compliance and MSL 1 moisture sensitivity ratings. The substitute offers higher inventory availability (1355 units) and is packaged in trays rather than bulk. Both parts are active products with established supply chains.

Selection between these parts should be based on current rating requirements and inventory availability. The electrical interface, mechanical form factor, and environmental operating range are equivalent across both options.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 86094648813755V1LF be used as a direct replacement for the HARTING 09734642804?

A: Yes, for applications where the 1.5A current rating is sufficient. Both connectors share identical mechanical dimensions, pitch, row configuration, mounting style, and operating temperature range. The primary difference is the current rating (2A vs. 1.5A) and insulation material composition.

Q: What is the significance of the current rating difference between these parts?

A: The HARTING part is rated for 2A per contact, while the Amphenol ICC part is rated for 1.5A per contact. Selection depends on the actual current requirements of your circuit. If your application draws 1.5A or less per contact, both parts are functionally equivalent.

Q: Are there compliance differences between these connectors?

A: Both parts meet UL94 V-0 flammability requirements and maintain MSL 1 moisture sensitivity ratings. The HARTING part carries ROHS3 compliance, while the Amphenol ICC part carries standard RoHS compliance. Both are suitable for industrial and telecommunications applications.

Q: Does packaging format affect connector performance?

A: No. The HARTING part is supplied in bulk packaging, while the Amphenol ICC part is supplied in trays. Packaging format affects handling, storage, and ordering logistics but does not impact electrical or mechanical performance.

Q: Are the insulation materials interchangeable?

A: Yes, for the specified operating temperature range and environmental conditions. The HARTING part uses PCT glass-filled material, while the Amphenol ICC part uses polyester thermoplastic. Both materials meet the same flammability and moisture sensitivity requirements for this application.

Q: Which part should I select if both are available?

A: Base your selection on current rating requirements. If your application requires 2A per contact, use the HARTING part. If 1.5A per contact is sufficient, either part is acceptable. Consider inventory availability and packaging preferences for procurement decisions.