HARTING 09670154764 D-Sub Receptacle 15-Position Right Angle Solder Connector

Part Overview

The HARTING 09670154764 is a 15-position D-Sub receptacle connector with female sockets, configured for right-angle through-hole solder termination. This connector is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts become necessary when addressing supply chain constraints, obsolescence of legacy designs, or when specific performance characteristics of alternative manufacturers better align with application requirements. The substitute parts listed below maintain functional compatibility through matching core electrical and mechanical parameters while offering different compliance profiles and material specifications.

Substiute Parts

09670154764

HARTINGIn Stock: 91409670154764 Datasheet

Current PartRFQ

1218434-2

TE Connectivity Aerospace, Defense and MarineIn Stock: 9821218434-2 Datasheet

MFR RecommendedRFQ

173-E15-211R141

NorComp Inc.In Stock: 1158173-E15-211R141 Datasheet

MFR RecommendedRFQ

173-E15-211R241

NorComp Inc.In Stock: 1434173-E15-211R241 Datasheet

MFR RecommendedRFQ

174-E15-211R141

NorComp Inc.In Stock: 1319174-E15-211R141 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09670154764 is determined by the following mandatory parameters:

• Connector Type: Receptacle, Female Sockets (must match exactly)
• Number of Positions: 15 (must match exactly)
• Number of Rows: 2 (must match exactly)
• Shell Size, Connector Layout: 2 (DA, A) (must match exactly)
• Mounting Type: Through Hole, Right Angle (must match exactly)
• Termination: Solder (must match exactly)
• Contact Type: Signal (must match exactly)

The substitute parts identified below satisfy all mandatory parameters. Variations in secondary parameters such as shell material finish, contact finish, backset spacing, flange feature design, and compliance certifications are permissible within the scope of functional equivalence. However, these variations must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1218434-2 is the primary substitute for new designs and applications requiring active product status. This part maintains full functional compatibility with the HARTING 09670154764 while offering military-grade specifications (MIL-DTL-24308, AMPLIMITE 109 series). The cadmium-plated steel shell and gold-plated contacts provide enhanced corrosion resistance suitable for aerospace, defense, and marine environments. However, this part is RoHS non-compliant and should not be selected for applications with mandatory RoHS3 compliance requirements. The backset spacing of 0.318" (8.08mm) differs from the main part and must be verified for PCB layout compatibility.

NorComp 173-E15-211R141 and 173-E15-211R241 are functionally equivalent alternatives from the 173-E M Series. Both parts are obsolete but remain available in inventory. The primary distinction between these two parts is the flange feature: 173-E15-211R141 includes female screwlock (4-40) while 173-E15-211R241 includes standard screws (4-40). Both feature yellow chromate-plated steel shells, gold-plated contacts with flash thickness, and UL94 V-0 flammability rating. The reduced operating temperature range (-50°C ~ 100°C) and smaller backset spacing (0.283" / 7.20mm) require verification against application specifications. These parts are RoHS non-compliant.

NorComp 174-E15-211R141 is an obsolete alternative from the 174-E M Series with specifications similar to the 173-E series parts. The backset spacing of 0.370" (9.40mm) is closer to the main part specification than the 173-E series. This part includes female screwlock (4-40) flange feature, yellow chromate-plated steel shell, and gold-plated contacts. The reduced operating temperature range and RoHS non-compliance status apply as with the 173-E series.

For applications requiring ROHS3 compliance, the HARTING 09670154764 remains the only compliant option among the listed parts. For applications where RoHS compliance is not mandated, TE Connectivity 1218434-2 is recommended as the primary substitute due to active product status and military-grade specifications.

Frequently Asked Questions (FAQ)

Q: Can NorComp 173-E15-211R141 be used as a direct replacement for HARTING 09670154764?

A: Functional compatibility exists for the core connector interface (15-position, 2-row, D-Sub receptacle, right-angle solder termination). However, the backset spacing differs (0.283" vs. 0.409"), which may affect PCB layout. The reduced operating temperature range (-50°C ~ 100°C vs. -55°C ~ 125°C) and RoHS non-compliance status must be evaluated against application requirements. The flange feature design also differs, which may impact mechanical mounting.

Q: What is the difference between NorComp 173-E15-211R141 and 173-E15-211R241?

A: Both parts are functionally identical except for the flange feature. The 173-E15-211R141 includes a female screwlock (4-40) flange, while the 173-E15-211R241 includes standard screws (4-40). Selection depends on the mating connector type and mechanical interface requirements.

Q: Is TE Connectivity 1218434-2 suitable for RoHS-compliant applications?

A: No. TE Connectivity 1218434-2 is RoHS non-compliant. For applications with mandatory RoHS3 compliance requirements, the HARTING 09670154764 is the appropriate selection.

Q: Why do the substitute parts have different backset spacing values?

A: Backset spacing is a design parameter that varies by manufacturer and product series. The HARTING part specifies 0.409" (10.40mm), while NorComp 173-E series specifies 0.283" (7.20mm) and NorComp 174-E series specifies 0.370" (9.40mm). These differences reflect distinct mechanical designs and must be verified for PCB layout compatibility before substitution.

Q: Are the NorComp parts still available despite obsolete status?

A: Yes. The provided inventory data indicates that NorComp 173-E15-211R141, 173-E15-211R241, and 174-E15-211R141 remain available in stock (1100, 1328, and 1231 units respectively), despite obsolete product status. Availability may vary by distributor and time.

Q: What is the significance of the contact finish differences?

A: The HARTING part does not specify contact finish, while substitute parts feature gold plating. TE Connectivity 1218434-2 specifies 10.0µin (0.25µm) gold thickness, while NorComp parts specify flash gold thickness. Gold plating provides enhanced corrosion resistance and improved electrical contact reliability. Flash thickness is thinner than standard plating and may be suitable for lower-stress applications.

Q: Can these connectors be used interchangeably in existing designs?

A: Interchangeability requires verification of multiple parameters: backset spacing for PCB layout, flange feature design for mechanical mounting, operating temperature range for environmental conditions, and compliance certifications for regulatory requirements. Direct substitution without design review is not recommended.