HARTING 09670154763 D-Sub Receptacle 15-Position Equivalent & Substitute Parts

Part Overview

The HARTING 09670154763 is a 15-position D-Sub receptacle connector with right-angle solder termination, designed for through-hole mounting applications. This connector features a 2-row (DA, A) shell configuration with female socket contacts and unthreaded housing. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance, repairs, and legacy equipment support.

Substiute Parts

09670154763

HARTINGIn Stock: 112609670154763 Datasheet

Current PartRFQ

1218434-2

TE Connectivity Aerospace, Defense and MarineIn Stock: 9821218434-2 Datasheet

MFR RecommendedRFQ

173-E15-211R141

NorComp Inc.In Stock: 1158173-E15-211R141 Datasheet

MFR RecommendedRFQ

173-E15-211R241

NorComp Inc.In Stock: 1434173-E15-211R241 Datasheet

MFR RecommendedRFQ

174-E15-211R141

NorComp Inc.In Stock: 1319174-E15-211R141 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09670154763 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Connector type: Receptacle, Female Sockets
• Number of positions: 15
• Number of rows: 2
• Shell size and layout: 2 (DA, A)
• Mounting type: Through Hole, Right Angle
• Termination method: Solder

Secondary Compatibility Considerations:

• Operating temperature range: -55°C ~ 125°C (minimum requirement)
• Flange feature: Housing/Shell (Unthreaded)
• Contact type: Signal

Four substitute parts meet these core criteria. Variations in backset spacing, shell finish, contact finish, and flange screwlock features represent design differences that may affect mechanical fit and environmental performance but do not prevent functional substitution in applications where these variations are acceptable.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 1218434-2 is the primary active substitute. This part maintains full compatibility with the core connector specifications (15-position, 2-row, DA/A shell, right-angle solder termination, through-hole mounting) and extends the operating temperature range to match the original (-55°C ~ 125°C). The part is currently in active production status, ensuring long-term availability. However, it is RoHS non-compliant and features cadmium plating on the steel shell, which may present environmental or regulatory constraints in new designs. The backset spacing of 0.318" (8.08mm) differs from the original 0.409" (10.40mm), requiring verification of PCB layout compatibility.

NorComp 173-E15-211R141 and 173-E15-211R241 are functionally equivalent substitutes with identical core specifications. Both feature panel mount capability in addition to through-hole mounting, providing design flexibility. The primary distinction between these two parts is the flange feature: 173-E15-211R141 includes female screwlock (4-40) mating-side flanges, while 173-E15-211R241 uses standard screws (4-40). Both are obsolete products with reduced operating temperature range (-50°C ~ 100°C) compared to the original specification. Backset spacing is 0.283" (7.20mm), requiring PCB layout verification.

NorComp 174-E15-211R141 provides equivalent functionality with panel mount and through-hole mounting options. This part features female screwlock (4-40) mating-side flanges and is obsolete. The operating temperature range is -50°C ~ 100°C, and backset spacing is 0.370" (9.40mm), which is closer to the original 0.409" (10.40mm) specification than other NorComp alternatives.

All substitute parts maintain the critical functional parameters: 15-position receptacle configuration, 2-row layout, DA/A shell size, right-angle solder termination, and signal contact type. Selection should prioritize TE Connectivity 1218434-2 for new applications requiring active product status and extended temperature range, while NorComp alternatives remain viable for legacy system maintenance where operating temperature and RoHS compliance are not constraints.

Frequently Asked Questions (FAQ)

Q: Can I use TE Connectivity 1218434-2 as a direct replacement for HARTING 09670154763?

A: TE Connectivity 1218434-2 is functionally compatible as a substitute. Both connectors share identical core specifications: 15-position receptacle, 2-row configuration, DA/A shell size, right-angle solder termination, and through-hole mounting. However, the backset spacing differs (0.318" vs. 0.409"), requiring verification that your PCB layout accommodates this dimensional change. Additionally, TE Connectivity 1218434-2 is RoHS non-compliant and uses cadmium plating, which may affect regulatory compliance in your application.

Q: What is the difference between NorComp 173-E15-211R141 and 173-E15-211R241?

A: Both parts are identical except for the flange feature. The 173-E15-211R141 includes female screwlock (4-40) flanges on the mating side, while the 173-E15-211R241 uses standard screws (4-40). The choice depends on your connector mating interface requirements. Both parts are obsolete and have reduced operating temperature range (-50°C ~ 100°C) compared to the original HARTING part.

Q: Why do the substitute parts have different backset spacing values?

A: Backset spacing is the distance from the rear of the connector shell to the solder cup contact points. Different manufacturers design their connectors with varying backset spacing to accommodate different PCB layouts and mechanical designs. When substituting connectors, backset spacing must be verified against your PCB design to ensure proper solder joint formation and mechanical clearance. The original HARTING part specifies 0.409" (10.40mm), while substitutes range from 0.283" to 0.370".

Q: Are all substitute parts suitable for my application if it requires RoHS compliance?

A: No. The HARTING 09670154763 is ROHS3 compliant, but all four substitute parts are RoHS non-compliant. If your application or regulatory environment requires RoHS compliance, these substitutes are not suitable. You should consult with the manufacturers or authorized distributors to identify alternative D-Sub receptors that meet both functional requirements and RoHS compliance standards.

Q: What is the operating temperature difference between the original part and the NorComp substitutes?

A: The HARTING 09670154763 and TE Connectivity 1218434-2 both operate from -55°C to 125°C. The three NorComp alternatives (173-E15-211R141, 173-E15-211R241, and 174-E15-211R141) have a reduced operating temperature range of -50°C to 100°C. If your application requires operation below -50°C or above 100°C, the NorComp parts are not suitable. TE Connectivity 1218434-2 maintains the full temperature range of the original part.

Q: Can I use a substitute part with panel mount capability in place of the original through-hole only connector?

A: Yes. The NorComp parts (173-E15-211R141, 173-E15-211R241, and 174-E15-211R141) support both panel mount and through-hole mounting, providing additional design flexibility. If your application uses only through-hole mounting, the panel mount capability does not affect compatibility. However, verify that the flange features and backset spacing are compatible with your mechanical design.

Q: Which substitute part should I choose for a new design?

A: TE Connectivity 1218434-2 is the recommended choice for new designs because it is the only active product among the substitutes, ensuring long-term availability and supply chain stability. It maintains the full operating temperature range (-55°C ~ 125°C) of the original part. However, verify backset spacing compatibility with your PCB layout, and confirm that RoHS non-compliance and cadmium plating are acceptable for your regulatory environment.