HARTING 09665226801 D-Sub Plug Connector - Equivalent & Substitute Parts

Part Overview

The HARTING 09665226801 is a 50-position D-Sub plug connector with right-angle solder termination, designed for through-hole mounting applications. This connector features a 3-row configuration with shell size 5 (DD, D) layout and is rated for 7.5A continuous current operation across an extended temperature range of -55°C to 125°C. The connector is currently active in production and maintains ROHS3 compliance with UL94 V-0 material flammability rating. Substitute parts are identified when equivalent electrical and mechanical specifications are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

09665226801

HARTINGIn Stock: 103509665226801 Datasheet

Current PartRFQ

1218440-5

TE Connectivity Aerospace, Defense and MarineIn Stock: 7931218440-5 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09665226801 is determined by strict alignment of core electrical and mechanical parameters. The substitute part TE Connectivity 1218440-5 qualifies based on the following matching criteria:

• Connector Configuration: Both parts are 50-position D-Sub plugs with 3-row layout and shell size 5 (DD, D)
• Mounting Architecture: Both employ through-hole, right-angle solder termination
• Operational Envelope: Both support -55°C to 125°C operating temperature range
• Contact Topology: Both feature male pin signal contacts with solder termination

Substitution is valid where these core parameters align. Differences in current rating, backset spacing, shell finish, contact material, and compliance certifications must be evaluated against specific application requirements and are not barriers to substitution when electrical and mechanical form factors are equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the HARTING 09665226801 and TE Connectivity 1218440-5 are active production connectors suitable for 50-position D-Sub applications requiring through-hole solder termination and right-angle mounting. Selection between these parts should be based on the following documented specifications:

HARTING 09665226801 is appropriate for applications requiring ROHS3 compliance and higher current capacity (7.5A rating). This part maintains UL94 V-0 material flammability certification and is REACH unaffected.

TE Connectivity 1218440-5 is appropriate for military and aerospace applications conforming to MIL-DTL-24308 specifications. This part features cadmium-plated steel shell construction and gold-plated contacts (10.0µin thickness). Current rating is 5A, and the part is RoHS non-compliant and REACH affected.

Backset spacing differs between parts (10.40mm versus 8.08mm), which may affect PCB layout compatibility. Current rating differential (7.5A versus 5A) must be evaluated against circuit requirements.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1218440-5 be used as a direct replacement for HARTING 09665226801?

A: Both connectors share identical 50-position D-Sub plug configuration, 3-row layout, shell size 5 (DD, D), through-hole right-angle solder termination, and -55°C to 125°C operating temperature range. Substitution is mechanically and electrically valid where backset spacing (10.40mm vs. 8.08mm) and current rating (7.5A vs. 5A) are compatible with application requirements.

Q: What are the key differences between these two connectors?

A: Primary differences include current rating (HARTING rated 7.5A, TE Connectivity rated 5A), backset spacing (HARTING 10.40mm, TE Connectivity 8.08mm), shell finish (HARTING steel, TE Connectivity cadmium-plated steel), contact material (HARTING copper alloy, TE Connectivity brass), and compliance status (HARTING ROHS3 compliant, TE Connectivity RoHS non-compliant).

Q: Are there packaging or inventory considerations for these parts?

A: HARTING 09665226801 has 987 pieces in stock. TE Connectivity 1218440-5 has 739 pieces in stock. Both are supplied in bulk packaging.

Q: Which connector should be selected for new designs?

A: Selection depends on application requirements. For commercial applications requiring ROHS3 compliance and higher current capacity, HARTING 09665226801 is appropriate. For military or aerospace applications conforming to MIL-DTL-24308 specifications, TE Connectivity 1218440-5 is appropriate.

Q: Does backset spacing affect connector compatibility?

A: Backset spacing (distance from connector back to contact centerline) differs between parts. PCB layout and mating connector specifications must accommodate the specific backset spacing of the selected connector. This parameter must be verified against application requirements before substitution.