HARTING 09664637813 D-Sub Plug 37-Position Right Angle Solder Connector

Part Overview

The HARTING 09664637813 is a 37-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for applications requiring robust signal transmission in industrial and commercial environments. The part is currently active in production with 929 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part becomes unavailable or when design requirements permit alternative configurations.

Substiute Parts

09664637813

HARTINGIn Stock: 95009664637813 Datasheet

Current PartRFQ

DCM37P500

Amphenol ICC (FCI)In Stock: 896DCM37P500 Datasheet

MFR RecommendedRFQ

DCM37S300

Amphenol ICC (FCI)In Stock: 950DCM37S300 Datasheet

MFR RecommendedRFQ

DCML37P500M

Amphenol ICC (FCI)In Stock: 1174DCML37P500M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09664637813 are identified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

• Connector type: Plug with male pins
• Position count: 37 positions
• Row configuration: 2 rows
• Shell size and layout: 4 (DC, C)
• Mounting configuration: Through hole, right angle
• Termination method: Solder
• Current rating: 7.5A per contact
• Operating temperature range: -55°C to 125°C
• Material flammability: UL94 V-0

Substitute Parts Identified:

1. DCM37P500 (Amphenol ICC/FCI) – Direct functional equivalent plug connector with identical position count, mounting type, and electrical ratings. Differs in flange feature (unthreaded housing vs. mating side screwlock) and contact finish (gold vs. unspecified).

2. DCML37P500M (Amphenol ICC/FCI) – Plug connector with M3 mounting bracket feature. Maintains all critical electrical and mechanical parameters including 37 positions, right-angle through-hole mounting, and 7.5A current rating. Includes mounting brackets as a distinguishing feature.

3. DCM37S300 (Amphenol ICC/FCI) – Receptacle connector with female sockets. While this part shares the same shell size, position count, and electrical specifications, it is a receptacle configuration and therefore not a direct plug substitute. Listed for reference in mating pair applications.

Parameter Comparison

Engineering Selection Recommendations

For Direct Plug Substitution (HARTING 09664637813):

DCM37P500 and DCML37P500M are functionally equivalent plug connectors that maintain all critical electrical and mechanical parameters. Both parts are manufactured by Amphenol ICC (FCI) and are active in production. Selection between these two depends on mounting bracket requirements: DCM37P500 is suitable for applications without bracket mounting, while DCML37P500M includes M3 mounting brackets for applications requiring mechanical fastening.

Compliance Consideration:

The HARTING 09664637813 is ROHS3 compliant, while both Amphenol ICC substitute parts (DCM37P500 and DCML37P500M) are RoHS non-compliant. Applications subject to RoHS regulations must retain the HARTING part or identify alternative RoHS-compliant sources.

For Mating Pair Applications:

DCM37S300 is a receptacle connector (female sockets) that mates with plug configurations. This part is not a substitute for the HARTING plug but is referenced for complete connector pair specifications in applications requiring both plug and receptacle connectors.

Frequently Asked Questions (FAQ)

Q: Can DCM37P500 be used as a direct replacement for HARTING 09664637813?

A: DCM37P500 maintains identical electrical ratings (7.5A per contact), position count (37), mounting type (through-hole right angle), and operating temperature range (-55°C to 125°C). The primary difference is the flange feature: HARTING uses a mating side female screwlock (4-40), while DCM37P500 uses an unthreaded housing. Mechanical compatibility depends on the application's mounting requirements.

Q: What is the difference between DCM37P500 and DCML37P500M?

A: Both are 37-position D-Sub plug connectors with identical electrical specifications. DCML37P500M includes M3 mounting brackets as a distinguishing feature, making it suitable for applications requiring mechanical fastening to a panel or chassis. DCM37P500 lacks this bracket feature and is suitable for applications with alternative mounting methods.

Q: Why is DCM37S300 listed as a substitute if it is a receptacle?

A: DCM37S300 is not a direct substitute for the plug connector. It is listed to provide complete connector pair information for applications requiring both plug and receptacle connectors. The receptacle shares the same shell size (4 DC, C), position count (37), and electrical ratings, making it the appropriate mating component for plug connectors in this series.

Q: Are there RoHS compliance differences between the HARTING part and the Amphenol ICC substitutes?

A: Yes. HARTING 09664637813 is ROHS3 compliant, while DCM37P500 and DCML37P500M are RoHS non-compliant. Applications subject to RoHS regulations must use the HARTING part or identify alternative RoHS-compliant sources from other manufacturers.

Q: What is the voltage rating difference?

A: The HARTING 09664637813 does not specify a voltage rating in the provided data. Both Amphenol ICC substitute parts (DCM37P500 and DCML37P500M) are rated for 300V. Applications requiring voltage specification should confirm compatibility with system requirements.

Q: Can these connectors be used interchangeably in existing designs?

A: Interchangeability depends on specific design requirements. All three plug connectors (HARTING 09664637813, DCM37P500, and DCML37P500M) share the same position count, shell size, mounting type, and current rating. However, differences in flange features, contact materials, and compliance certifications must be evaluated against application requirements before substitution.