HARTING 09664636813 D-Sub Plug 37-Position Right Angle Solder Connector

Part Overview

The HARTING 09664636813 is a 37-position D-Sub plug connector with right-angle through-hole solder termination. This connector is designed for applications requiring reliable signal transmission in industrial and commercial environments. The part is currently active in production with 899 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part becomes unavailable or when design requirements necessitate alternative configurations.

Substiute Parts

09664636813

HARTINGIn Stock: 94109664636813 Datasheet

Current PartRFQ

DCM37P500

Amphenol ICC (FCI)In Stock: 896DCM37P500 Datasheet

MFR RecommendedRFQ

DCM37S300

Amphenol ICC (FCI)In Stock: 950DCM37S300 Datasheet

MFR RecommendedRFQ

DCML37P500M

Amphenol ICC (FCI)In Stock: 1174DCML37P500M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the HARTING 09664636813 is determined by the following critical parameters:

Primary Substitution Criteria:

• Connector type: Plug with male pins
• Number of positions: 37
• Number of rows: 2
• Shell size and layout: 4 (DC, C)
• Mounting type: Through hole, right angle
• Termination method: Solder
• Current rating: 7.5A per contact
• Operating temperature range: -55°C to 125°C
• Material flammability: UL94 V-0

Substitute Parts Identified:

1. DCM37P500 (Amphenol ICC/FCI) – Direct functional equivalent plug connector with identical electrical and mechanical specifications. Differs in shell finish (yellow cadmium plated) and contact material (brass vs. copper alloy).

2. DCML37P500M (Amphenol ICC/FCI) – Plug connector with M3 mounting bracket feature. Maintains all critical electrical and mechanical parameters while providing enhanced mechanical mounting capability.

3. DCM37S300 (Amphenol ICC/FCI) – Receptacle connector with female sockets. Functionally complementary for mating applications; shares identical shell size, position count, and electrical ratings but differs in connector type and mounting orientation.

Parameter Comparison

Engineering Selection Recommendations

For Direct Plug Substitution (DCM37P500 or DCML37P500M):

Select DCM37P500 when a direct functional replacement is required with standard mounting. This part maintains all critical electrical and mechanical parameters. Note that this substitute is RoHS non-compliant, whereas the HARTING 09664636813 is ROHS3 compliant. Verify RoHS compliance requirements for your application before selection.

Select DCML37P500M when enhanced mechanical mounting capability is required through M3 mounting brackets. This part is functionally equivalent to DCM37P500 with the addition of integrated mounting features. RoHS compliance status remains non-compliant.

For Mating Receptacle Applications (DCM37S300):

Select DCM37S300 when a mating receptacle connector is required. This part shares identical shell size, position count, and electrical ratings but features female sockets and vertical mounting orientation. This connector is designed to mate with 37-position D-Sub plugs and is suitable for applications requiring a receptacle interface.

Compliance Considerations:

The HARTING 09664636813 is ROHS3 compliant. All identified Amphenol ICC (FCI) substitutes are RoHS non-compliant. Applications subject to RoHS regulations must account for this compliance difference. All parts maintain UL94 V-0 flammability rating and unlimited moisture sensitivity level (MSL 1).

Frequently Asked Questions (FAQ)

Q: Can DCM37P500 be used as a direct replacement for HARTING 09664636813?

A: DCM37P500 is functionally equivalent in terms of electrical and mechanical specifications. Both are 37-position D-Sub plugs with right-angle solder termination, identical current ratings (7.5A), and operating temperature range (-55°C to 125°C). The primary difference is RoHS compliance status: HARTING 09664636813 is ROHS3 compliant while DCM37P500 is not. Verify your application's RoHS requirements before substitution.

Q: What is the difference between DCM37P500 and DCML37P500M?

A: Both parts are 37-position D-Sub plugs with identical electrical specifications and right-angle solder termination. DCML37P500M includes M3 mounting brackets as an integrated feature, providing enhanced mechanical mounting capability. Select DCML37P500M if your application requires integrated mounting bracket functionality.

Q: When should DCM37S300 be used instead of a plug connector?

A: DCM37S300 is a receptacle connector with female sockets, designed to mate with 37-position D-Sub plugs. Use this part when your application requires a mating receptacle interface. It shares the same shell size (4, DC, C), position count (37), and electrical ratings (7.5A, 300V) as the plug connectors but features vertical mounting orientation.

Q: Are all substitute parts compatible with the same PCB footprint?

A: DCM37P500 and DCML37P500M are both right-angle plug connectors and share compatible PCB footprints with HARTING 09664636813. DCM37S300 is a receptacle with vertical mounting and requires a different PCB footprint. Verify mechanical dimensions and mounting hole patterns for your specific application.

Q: What is the backset spacing difference between the main part and substitutes?

A: HARTING 09664636813 specifies 0.409" (10.40mm) backset spacing. DCM37P500 and DCML37P500M specify 0.406" (10.30mm). This 0.03mm difference is within typical manufacturing tolerances for D-Sub connectors but should be verified against your PCB design specifications.

Q: Do all parts meet the same flammability and moisture sensitivity requirements?

A: All parts maintain UL94 V-0 material flammability rating and MSL 1 (Unlimited) moisture sensitivity level. These specifications are consistent across the main part and all substitutes.